Aaeon BOXER-6652 User manual

Last Updated: April 7, 2016

BOXER-6652

Fanless Embedded Box PC

User’s Manual 2

nd

Ed

Preface II

Fanless Embedded Box PC BOXER-6652

Copyright Notice

This document is copyrighted, 2016. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original manufacturer.

Information provided in this manual is intended to be accurate and reliable. However,

the original manufacturer assumes no responsibility for its use, or for any infringements

upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Fanless Embedded Box PC BOXER-6652

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

 Microsoft Windows is a registered trademark of Microsoft Corp.

 Intel, Pentium, Celeron, and Xeon

are registered trademarks of Intel Corporation

 Core, Atom are trademarks of Intel Corporation

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

All other product names or trademarks are properties of their respective owners.

Preface IV

Fanless Embedded Box PC BOXER-6652

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

 BOXER-6652

1

 Wallmount bracket

2

 Screw Package

1

 RAM Thermal Pad (60mm x 25mm x 3mm)

1

 Phoenix power connector

1

 Product CD with User’s Manual (in pdf) and drivers

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Fanless Embedded Box PC BOXER-6652

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver installation

instructions (if any), to facilitate users in setting up their product.

Users may refer to the AAEON.com for the latest version of this document.

Preface VI

Fanless Embedded Box PC BOXER-6652

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Do not cover the openings on the device to ensure optimal heat dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure to

ground yourself to prevent static charge when installing the internal components.

Use a grounding wrist strap and contain all electronic components in any

static-shielded containers.

Preface VII

Fanless Embedded Box PC BOXER-6652

17. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Fanless Embedded Box PC BOXER-6652

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received including interference that may cause

undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions and your local government’s

recycling or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et

les directives gouvernementales de recyclage.

Preface IX

Fanless Embedded Box PC BOXER-6652

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Embedded Box PC/ Industrial System

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Preface X

Fanless Embedded Box PC BOXER-6652

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

AAEON Embedded Box PC/ Industrial System

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

PCB & Other

Components

○

Wires &

Connectors

for External

Connections

○

Chassis

○

CPU & RAM

○

Hard Disk

○

PSU

○

O：The quantity of poisonous or hazardous substances or elements found in each of the

component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the

component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal

usage only

Preface XI

Fanless Embedded Box PC BOXER-6652

Table of Contents

Chapter 1 - Product Specifications ........................................................................................ 1

1.1 Specifications ............................................................................................................ 2

Chapter 2 – Hardware Information ....................................................................................... 5

2.1 Dimensions ............................................................................................................... 6

2.2 List of Jumpers ......................................................................................................... 7

2.2.1 Front Panel Connector (JP1) .......................................................... 8

2.2.2 LVDS Port Backlight Lightness Control Mode Selection (JP2) 8

2.2.3 LVDS Port Backlight Control Inverter VCC Selection (JP3) ...... 9

2.2.4 LVDS Port Operating VDD Selection (JP4).................................. 9

2.2.5 AT/ATX Control Selection (JP5)...................................................... 9

2.2.6 COM2 Ring Function Selection (JP6) ........................................... 9

2.2.7 COM1 Ring Function Selection (JP7) ......................................... 10

2.2.8 COM4 Function Mode Selection (JP8)....................................... 10

2.2.9 COM3 Function Mode Selection (JP9)....................................... 10

2.2.10 COM4 Termination Selection (DCD4) (JP10) ............................ 10

2.2.11 COM4 Termination Selection (DTR4) (JP11) ............................. 11

2.2.12 COM3 Termination Selection (DCD4) (JP12) ............................ 11

2.2.13 COM3 Termination Selection (DTR4) (JP13) ............................. 11

2.2.14 Clear COMS1 Jumper (CN23) ..................................................... 11

2.2.15 Clear COMS2 Jumper (CN24) ..................................................... 12

2.3 List of Connectors .................................................................................................. 13

2.3.1 Audio Connector (CN1) ................................................................ 15

2.3.2 LVDS Port (CN2) ............................................................................. 15

2.3.3 COM Port 5 and 6 (D-SUB9) (CN3) ........................................... 17

2.3.4 +5V/+12V Output for SATA HDD (CN4) ................................... 18

2.3.5 USB2.0 Port 6 and 7 (CN5) .......................................................... 18

Preface XII

Fanless Embedded Box PC BOXER-6652

2.3.6 LVDS Port Inverter / Backlight Connector (CN6)..................... 19

2.3.7 UIM Card Sock (Push-Push type) (CN7) .................................... 19

2.3.8 CFast Slot (CN8) ............................................................................. 20

2.3.9 COM Port 6 (Wafer BOX, Optional) (CN9) ............................... 21

2.3.10 COM Port 5 (Wafer BOX, Optional) (CN10) ............................. 21

2.3.11 SATA2.0 Connector (CN11) .......................................................... 22

2.3.12 +5V / SATA Power Connector (CN12) ....................................... 22

2.3.13 PSON# Output (CN13) ................................................................. 23

2.3.14 PCIe Connector (CN14) ................................................................ 23

2.3.15 +3.3V and +5V Output (CN15) .................................................. 23

2.3.16 SATA2.0 Connector (CN16) .......................................................... 24

2.3.17 MiniCard Slot (Full-MiniCard) (CN17) ........................................ 24

2.3.18 MiniCard Slot (Half-MiniCard) (CN18) ....................................... 26

2.3.19 PS/2 Keyboard/Mouse Combo Port (CN19) ............................ 28

2.3.20 PCH Digital IO Port (CN20) .......................................................... 29

2.3.21 UIM Card Socket (CN21) .............................................................. 29

2.3.22 Digital IO Port (CN22) ................................................................... 30

2.3.23 LPC Port (CN26) ............................................................................. 30

2.3.24 USB2.0 Port 8 and 9 (Wafer BOX, Optional) (CN29) .............. 31

2.3.25 USB3.0 (Wafer BOX, Optional) (CN30) ...................................... 32

2.3.26 External Power Input (CN31) ....................................................... 33

2.3.27 LAN (RJ-45)+Dual USB3.0+USB2.0 (CN32) .............................. 33

2.3.28 HDMI Port (CN33) .......................................................................... 35

2.3.29 LAN (RJ-45)+ Dual USB2.0 (CN34) ............................................ 36

2.3.30 COM Port 1 and 2 (D-SUB 9) (CN35) ........................................ 37

2.3.31 COM Port 3 and 4 (D-SUB 9) (CN36) ........................................ 38

2.3.32 Adapter Power in Connector (CN37)......................................... 39

2.3.33 VGA+DVI-D Port (CN38) .............................................................. 39

Preface XIII

Fanless Embedded Box PC BOXER-6652

2.3.34 LAN2 LED (LED 1) .......................................................................... 41

2.3.35 LAN1 LED (LED 2) .......................................................................... 41

2.3.36 LAN1 LED (LED 2) .......................................................................... 42

2.4 Installing Components .......................................................................................... 43

2.4.1 Installing MiniCard ......................................................................... 44

2.4.2 Installing CFast/ SIM Card ............................................................ 45

2.4.3 Installing HDD ................................................................................. 46

2.4.4 Installing RAM ................................................................................. 48

Chapter 3 - AMI BIOS Setup ................................................................................................ 50

3.1 System Test and Initialization .............................................................................. 51

3.2 AMI BIOS Setup ..................................................................................................... 52

3.3 Setup Submenu: Main .......................................................................................... 53

3.4 Setup Submenu: Advanced ................................................................................. 54

3.4.1 F81866 Super IO Configuration .................................................. 55

3.4.1.1 F81866 Super IO Configuration: Serial Port 1

Configuration .............................................................................................. 56

3.4.1.2 F81866 Super IO Configuration: Serial Port 2

Configuration .............................................................................................. 57

3.4.1.3 F81866 Super IO Configuration: Serial Port 3

Configuration .............................................................................................. 58

3.4.1.4 F81866 Super IO Configuration: Serial Port 4

Configuration .............................................................................................. 59

3.4.1.5 F81866 Super IO Configuration: Serial Port 5

Configuration .............................................................................................. 60

3.4.1.6 F81866 Super IO Configuration: Serial Port 6

Configuration .............................................................................................. 61

3.4.2 Advanced: F81866 H/W Monitor ............................................... 62

3.4.3 Advanced: Power Management ................................................. 63

Preface XIV

Fanless Embedded Box PC BOXER-6652

3.4.4 Advanced: CPU Configuration .................................................... 65

3.4.5 Advanced: AMT Configuration ................................................... 67

3.4.6 Advanced: Trusted Computing ................................................... 68

3.4.7 Advanced: SATA Configuration ................................................... 69

3.4.8 Advanced: USB Configuration ..................................................... 70

3.4.9 Advanced: Dynamic Digital IO .................................................... 71

3.5 Setup submenu: Chipset ...................................................................................... 72

3.5.1 Chipset: PCH-IO Configuration................................................... 73

3.5.2 Chipset: System Agent (SA) Configuration ............................... 75

3.5.2.1 System Agent (SA) Configuration: Memory

Configuration .............................................................................................. 76

3.6 Setup submenu: Boot ........................................................................................... 77

3.6.1 Boot: BBS Priorities ........................................................................ 78

3.7 Setup submenu: Security ..................................................................................... 79

3.8 Setup submenu: Save & Exit ............................................................................... 80

Chapter 4 – Drivers Installation ............................................................................................ 81

4.1 Product CD/DVD ................................................................................................... 82

Appendix A - Watchdog Timer Programming ................................................................... 84

A.1 Watchdog Timer Initial Program ........................................................................ 85

Appendix B - I/O Information .............................................................................................. 90

B.1 I/O Address Map ................................................................................................... 91

B.2 Memory Address Map ......................................................................................... 93

B.3 IRQ Mapping Chart ............................................................................................... 94

B.4 DMA Channel Assignments .............................................................................. 104

Fanless Embedded Box PC BOXER-6652

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Fanless Embedded Box PC BOXER-6652

1.1 Specifications

System

 Processor

Intel

®

4

th

Generation CPU

 System Memory

204-pin DDR3L 1333/1600 MHz SODIMM x 1,

up to 8 GB

 Chipset

Intel

®

QM87 PCH

 Storage

Onboard CFast slot x 1

2.5" SATA HDD/SSD drive bay x 1

 Rear I/O Panel

3-pin terminal block x 1

DB-9 for RS-232 x 2

DB-9 for RS-232/422/485 x 2 (isolation)

USB2.0 type A x 2

USB3.0 type A x 2

DB-15 for VGA x 1

DVI-D x 1

HDMI 1.4a x 1

RJ-45 for 10/100/1000Base-TX x 2

 Front I/O Panel

Power button x 1

DB-9 for RS-232 x 2

CFast slot x 1

SIM slot x 1

USB2.0 type A x 2

Line-out x 1

SMA Antenna holes x 2

 Front Indicators

System LED x 1

HDD LED x1

Chapter 1 – Product Specifications 3

Fanless Embedded Box PC BOXER-6652

LAN1 Tx LED x 1

LAN1 Rx LED x 1

LAN2 Tx LED x 1

LAN2 Rx LED x 1

 Expansion Slot

Mini Card slot x 2 (USB & PCIe signal)

 OS Support

Windows

®

8.1

Windows

®

7

Windows

®

Embedded Standard 7

Windows

®

Embedded Standard 8

Linux kernel 2.6.x or above

Linux Red Hat

Mechanical

 Construction

Rugged aluminum chassis

 Mounting

Wallmount

 Dimension (W x H x D)

264.16 x 193.5 x 69.62 mm (10.4" x 7.62" x 2.74")

 Gross Weight

5 Kg (11 lb)

Environmental

 Operating Temperature

-20°C ~ 60°C (-4°F ~ -140°F) - with 0.5 m/s

airflow (HDD/CFast)

 Storage Temperature

-20°C ~ 70°C (-4°F ~ -158°F)

 Operating Humidity

5~95% @ 40°C, non-condensing

 Anti-Vibration

5 G

rms

/ 5 ~ 500Hz Operation (CFast)

1 G

rms

/ 5 ~ 500 Hz/ Operation (HDD)

Chapter 1 – Product Specifications 4

Fanless Embedded Box PC BOXER-6652

 Anti-Shock

50 G peak acceleration (11 msec.

duration)-CFast

20 G peak acceleration (11 msec. duration)-HDD

 EMC

CE/FCC Class A

Power Supply

 DC Input

9 ~ 30 V, AT or ATX

Fanless Embedded Box PC BOXER-6652

Chapter 2

Chapter 2 – Hardware Information

Chapter 2 – Hardware Information 6

Fanless Embedded Box PC BOXER-6652

2.1 Dimensions

ISOLATION

-D

BOXER-6652

Page is loading ...

Aaeon BOXER-6652 User manual

Aaeon BOXER-6652 User manual

Related papers

Other documents