• User Manual •
SB2181
Basic Phone
SB2181 User Guide
1
FEATURES：
• Last Number Redial
• Tone/Pulse selection
• Flash, Mute and Pause Feature
•
Block All Outgoing Calls Feature
• Wall Mount Feature
TABLE OF CONTENT
PRODUCT OVERVIEW: .................................................................................... 2
FUNCTION KEY OPERATION: ............................................................................2
MUTE key ...............................................................................................2
PAUSE key .............................................................................................. 2
FLASH key (600ms) .............................................................................3
REDIAL key .............................................................................................3
LOCK FUNCTION ....................................................................................... 3
TONE/PULSE switch...................................................................................3
TROUBLESHOOTING GUIDE:.............................................................................3
DECLARATION OF CONFORMITY:........................................................................ 3
!
Please ensure the phone is placed in a dry and ventilated place without corrosive air.
SB2181 User Guide
2
PRODUCT OVERVIEW:
FUNCTION KEY OPERATION:
MUTE key
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
PAUSE key
In off hook mode, press PAUSE key to insert a 3 second pause before continuing dialing the
rest of the numbers. This could be required in a company PABX environment.
2
3
4
5
1
Description:
1. MUTE key 6. Handset Cord jack
2. PAUSE key 7. LOCK switch
3. FLASH key 8. TONE/PULSE switch
4. REDIAL key 9. LINE jack
5. 0-9/#/* key
8
6
9
7
SB2181 User Guide
3
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL key or dial out another number.
REDIAL key
In the off-hook mode, press this key to redial the last dialed number.
LOCK FUNCTION
Use the keys provided in the package. The telephone allows all outgoing number if the key is
on red point. It cannot dial outgoing number when the key is on green point.
TONE/PULSE switch
Toggle the switch to switch between tone or pulse dialing.
TROUBLESHOOTING GUIDE:
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
(Q) I could not call out any number.
(A) Ensure that you have not locked the telephone. Use the keys provided to turn to Red
point.
DECLARATION OF CONFORMITY:
The telephone complies with the essential protective requirements and objectives of:
• EC R& TTE Directive 1999/5/EC
• EC Low Voltage Directive 73/23/EEC
• EC EMC Directive 89/336/EEC
And conforms to the following relevant harmonized standards:
• EMC: EN55022, EN55024
• Safety: EN 60950
Created on 9
th
November 2005. SB2181 Basic Phone.
Please visit us at www.shirocorp.com
.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Tiptel 1030 User manual
-
-
ClearSounds PHONE A1600 User manual
-
ClearSounds Freedom Phone CSC1000 User manual
-
Binatone CC2310 User manual
-
NEC AT-35 User manual
-
-
-
Geemarc PHOTOPHONE 155 User manual
-
Topcom 3970 User manual