Minka Group 8815-57 User manual

Brand: Minka Group

Model: 8815-57

Type: User manual

INSTALLATION INSTRUCTIONS

For Outdoor Lantern (New.07/16/2012)

READ AND SAVE THESE INSTRUCTIONS

WAR N I NG ! SH UT P O W E R O F F AT FU S E O R C I R C U I T B R E AK E R.

AV E R T I S S E ME N T ! C O U P E R L E C O UR A NT AU N I V E AU DE S F US I B L E S O U D U D I S J O N C T E U R .

Fig. 2

Fig.1

Fig. 3

HANGING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker and remove

the old fixture from the ceiling, including the old

crossbar.

2. Carefully unpack your new fixture and lay out all the

parts on a clear area. Take care not to lose any small

parts necessary for the installation.

3. Pull black and white wire out of electrical outlet box.

4. Mount circular strap to outlet box. The side of the

crossbar (A) marked “GND” must face out. (Fig.1)

CONNECTING THE WIRES (Fig. 2,3)

5. Connect electrical wires as shown making sure all

wire connectors are secured. If your outlet has a

ground wire (green or bare copper), connect the

fixtures Ground Wire to it. If not, connect the fixture

Ground Wire directly to the Crossbar using the

Green Screw provided. After wires are connected,

tuck them carefully inside junction box. (Fig.2)

6. To prevent moisture from entering the outlet box and

causing a short, use clear caulking(i.e.

Indoor/Outdoor Silicone Sealant) to outline the

outside of fixture backplate where it meets the wall

leaving a space at bottom to allow moisture a means

to escape. (Fig.3)

COMPLETING THE INSTALLATION (Fig. 1)

7. Align fixture to stud screws on circular strap and attach

fixture with Knurled knobs. (Fig.1)

8. Install the bulb (not included) in accordance with the

fixture’s specification. (DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

9. For installing or replacing bulb at a later date, install or

replace it to the socket from the bottom of the fixture.

(Fig. 1)

Your installation is now complete. Return power to the

junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for installation

purposes only. It may or may not be identical to the fixture

purchased.

U.S. Patent:436,208

This product is protected by United States Federal and/or

State Law, including Patent and/or Copyright laws.

LA-286E-A

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

Finial

Dome

Assembly

Knurled

Knobs

Circular Strap

Mounting

Screws

Stud Screws

BACKPLATE

CAULKING

Minka Group 8815-57 User manual

Minka Group 8815-57 User manual

Minka Group 8815-57 User manual

Related papers

Other documents