2. QOLSYS
  3. QR0041-840

QOLSYS QR0041-840 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the QOLSYS QR0041-840 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Document#: IQP2B-QG-06-17
Revision#: 6/29/17
Issue Date: JUN 2017
Qolsys Product #: QR0041-840
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
TechSupport@Qolsys.com
CONTACT TECH SUPPORT
GOT QUESTIONS?
1. Unplug Battery Connector: Once the panel is powered
down, unplug 4 pin battery connector from the board.
2. Remove Battery: Pull the blue tab from under the battery
downwards. This will peel away the tape holding the
battery in place.
3. Install New Battery: Remove the protective film from the
adhesive tape on the back of the battery and seat the
battery into the bottom lefthand plastic corner. Plug the
battery connector back into the board.
1.
2.
3.
CAUTION:
-Do NOT use a screwdriver or anything sharp that could
puncture the battery.
-Do NOT pull on the battery cable to remove battery.
-Only use factory replacement battery QR0041-840.
IQ PANEL 2 BATTERY QUICK INSTALL GUIDE
Power down panel: Go to Advanced Settings and enter the
Installer/Dealer/Master code, then select “Power Down”
/