Avid Interplay MAM 5.9 User Manager User guide

Category
Software
Type
User guide
Interplay
®
| MAM User Manager
User’s Guide
Version 5
2
Legal Notices
Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.
This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be
used in accordance with the license agreement.
This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents.
This document is protected under copyright law. An authorized licensee of Avid Interplay | Media Asset Manager may reproduce this
publication for the licensee’s own use in learning how to use the software. This document may not be reproduced or distributed, in whole
or in part, for commercial purposes, such as selling copies of this document or providing support or educational services to others. This
document is supplied as a guide for Avid Interplay | MAM. Reasonable care has been taken in preparing the information it contains.
However, this document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology, Inc. does not accept
responsibility of any kind for customers’ losses due to the use of this document. Product specifications are subject to change without
notice.
Copyright © 2017 Avid Technology, Inc. and its licensors. All rights reserved.
The following disclaimer is required by Apache Commons Logging:
Copyright © 2003-2013 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
The following disclaimer is required by Apache Commons Net:
Copyright © 2001-2013 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
The following disclaimer is required by Apache Jakarta Commons HttpClient:
Copyright © 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
The following disclaimer is required by Apache log4net:
Copyright © 2004-2011 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
The following disclaimer is required by Apache Xerxes:
Copyright © 2008 Apache Software Foundation
Licensed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
The following disclaimer is required by Behaviour.js:
This product includes software developed by Ben Nolan and his contributors. Copyright © 2006, 2007 Ben Nolan. All rights reserved.
The following disclaimer is required by CFlatToolbar:
Portions of this product are Copyright © 2002 Roger Onslov, all rights reserved.
The following disclaimer is required by Cross-Browser X Library:
Copyright © 2000-2009 Michael Foster, distributed under the terms of LGPL (http://cross-browser.com/license.html)
The following disclaimer is required by CSXButton:
Copyright © 1998 Michael Santoro, all rights reserved.
The following disclaimer is required by CVersionInfo:
Portions of this product are Copyright © 1997 Roberto Rocco, all rights reserved.
The following disclaimer is required by Assisted Solutions InputMask:
Portions of this product are Copyright © Data Reasearch Group. All rights reserved.
The following disclaimer is required by dicas:
Portions of this product are Copyright © dicas digital image coding GmbH. All rights reserved.
The following disclaimer is required by DirectShowLib:
Copyright (C) 2007 http://sourceforge.net/projects/directshownet, distributed under the terms of LGPL V2.1 (http://www.gnu.org/licenses/
lgpl-2.1.html)
The following disclaimer is required by Divelements:
Portions of this product are Copyright © 2003-2011 Divelements Limited.
The following disclaimer is required by DockPanelSuite:
This product includes software developed by Mark Twombley, Steve Overton, and Weifen Luo and their contributors. Copyright © 2009
Mark Twombley, Steve Overton, and Weifen Luo.
The following disclaimer is required by FFmpeg:
FFmpeg is Copyright © 2000-2003 Fabrice Bellard and is licensed under the terms of the GNU Lesser General Public License, which is
included with this product.
3
The following disclaimer is required by GDCL Sample Parser:
Copyright 2004 GDCL (http://www.gdcl.co.uk)
The following disclaimer is required by getElementsByAttribute:
Copyright © 2006 Robert Nyman (http://www.robertnyman.com)
The following disclaimer is required by GoXam:
Portions of this product are Copyright © 1995-2011 Northwoods Software. All rights reserved.
The following disclaimer is required by IC#Code #ZipLib:
Copyright © 2000-2009 Michael Foster, distributed under the terms of GNU GPL with the following exception: As a special exception, the
copyright holders of this library give you permission to link this library with independent modules to produce an executable, regardless of
the license terms of these independent modules, and to copy and distribute the resulting executable under terms of your choice, provided
that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is
a module which is not derived from or based on this library. If you modify this library, you may extend this exception to your version of the
library, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version.
The following disclaimer is required by IFilter Text Extracter:
IFilter Text Extracter Microsoft Public License (Ms-PL)
The following disclaimer is required by ImageMagick:
Copyright 1999-2014 ImageMagick Studio LLC, a non-profit organization dedicated to making software imaging solutions freely available.
(http://www.imagemagick.org/script/license.php)
The following disclaimer is required by Interplay Central Playback Service:
This product includes FFmpeg, which is covered by the GNU Lesser General Public License.
This product includes software that is based in part of the work of the FreeType Team.
This software is based in part on the work of the Independent JPEG Group.
This product includes libjpeg-turbo, which is covered by the wxWindows Library License, Version 3.1.
Portions copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 by Cold Spring Harbor Laboratory. Funded under Grant P41-
RR02188 by the National Institutes of Health.
Portions copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 by Boutell.Com, Inc.
Portions relating to GD2 format copyright 1999, 2000, 2001, 2002 Philip Warner.
Portions relating to PNG copyright 1999, 2000, 2001, 2002 Greg Roelofs.
Portions relating to gdttf.c copyright 1999, 2000, 2001, 2002 John Ellson ([email protected]).
Portions relating to gdft.c copyright 2001, 2002 John Ellson ([email protected]).
Portions relating to JPEG and to color quantization copyright 2000, 2001, 2002, Doug Becker and copyright (C) 1994, 1995, 1996, 1997,
1998, 1999, 2000, 2001, 2002, Thomas G. Lane. This software is based in part on the work of the Independent JPEG Group. See the file
README-JPEG.TXT for more information. Portions relating to WBMP copyright 2000, 2001, 2002 Maurice Szmurlo and Johan Van den
Brande.
Permission has been granted to copy, distribute and modify gd in any context without fee, including a commercial application, provided that
this notice is present in user-accessible supporting documentation.This does not affect your ownership of the derived work itself, and the
intent is to assure proper credit for the authors of gd, not to interfere with your productive use of gd. If you have questions, ask. "Derived
works" includes all programs that utilize the library. Credit must be given in user-accessible documentation.This software is provided "AS
IS." The copyright holders disclaim all warranties, either express or implied, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, with respect to this code and accompanying documentation.Although their code does
not appear in gd, the authors wish to thank David Koblas, David Rowley, and Hutchison Avenue Software Corporation for their prior
contributions.
The following disclaimer is required by Interplay Entertainment Corp.:
The Interplay name is used with the permission of Interplay Entertainment Corp., which bears no responsibility for the product.
The following disclaimer is required by JavaZoom:
Portions of this product are Copyright © JavaZoom. All rights reserved.
The following disclaimer is required by JQuery:
Copyright 2013 jQuery Foundation and other contributors (http://jquery.com/)
The following disclaimer is required by JQuery Plugin Autocomplete:
Copyright (c) 2009 Jörn Zaefferer. (http://www.opensource.org/licenses/mit-license.php)
The following disclaimer is required by jquery.contextMenu:
Copyright © 2008 A Beautiful Site, LLC
The following disclaimer is required by jquery.jqDnR:
Copyright © 2007 Brice Burgess (<bhb@iceburg.net>, http://www.iceburg.net)
The following disclaimer is required by Ui.dropdownchecklist:
Copyright © 2008-2010 Adrian Tosca, Copyright (c) 2010-2011 Ittrium LLC
The following disclaimer is required by jquery.json:
Copyright © 2009 Brantley Harris
4
The following disclaimer is required by jquery.metadata:
Copyright © 2006 John Resig, Yehuda Katz, Jörn Zaefferer, Paul McLanahan
The following disclaimer is required by jquery.jqModal:
Copyright © 2007,2008 Brice Burgess (<[email protected]et>)
The following disclaimer is required by jquery.jTemplates:
Copyright © 2009 Tomasz Gloc
The following disclaimer is required by jquery.treeview:
Copyright © 2007 Jörn Zaefferer
The following disclaimer is required by jquery UI:
Copyright © 2011, Scott Gonzalez et al. (http://jqueryui.com/about)
The following disclaimer is required by JScape:
Portions of this product are Copyright © JScape. All rights reserved.
The following disclaimer is required by JScript Hashtable:
Copyright © 2003 Michael Synovic This is a Javascript implementation of the Java Hashtable object.
The following disclaimer is required by JScript Table Sorter:
Copyright ©2010 Michael Leigeber. All Rights Reserved This script has been tested in all major browsers and is available free of charge
for both personal or commercial projects under the creative commons license.
The following disclaimer is required by Libjpeg-turbo:
libjpeg-turbo is Copyright © 1998-2005 Julian Smart, Robert Roebling et al and is licensed under the terms of the wxWindows Library
Licence, Version 3.1, which is included with this product.
The following disclaimer is required by Limited Concurrency Task Scheduler:
Portions Copyright © Microsoft Corporation Inc. All Rights Reserved. Microsoft Limited Public License version 1.1
The following disclaimer is required by MediaLooks:
Portions of this product are Copyright MediaLooks . All rights reserved.
The following disclaimer is required by Microsoft Corporation:
Portions of this product are Copyright © Microsoft Corporation. All rights reserved.
The following disclaimer is required by Microsoft.Net Framework Base Class Libraries, BigRational:
Portions of this product are Copyright © Microsoft Corporation. All rights reserved.
The following disclaimer is required by Microsoft Prism:
Microsoft patterns & practices License; Creative Commons Attribution License 3.0 Unported
The following disclaimer is required by MOG Solutions:
Portions of this product are Copyright © MOG Solutions. All rights reserved.
The following disclaimer is required by MPEG Audio:
MPEG Audio technology may be included with this product. Audio MPEG, Inc. and S.I.SV.EL., S.P.A. require this notice: This product
contains MPEG Audio technology licensed by Audio MPEG and SISVEL only for use in accordance with Avid's EULA. Last Updated:
March 2010
The following disclaimer is required by MSTS-adapter:
Copyright © 2008 Will Ballard / Duane Fields / ExactMagic
The following disclaimer is required by MVVM Lite:
Copyright (c) 2009 - 2011 Laurent Bugnion
The following disclaimer is required by nUnit:
Copyright (c) 2004-2009 Charlie Poole
The following disclaimer is required by Obout Software:
Portions of this product are Copyright © Obout Software. All rights reserved.
The following disclaimer is required by OpenSSL:
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)
The following disclaimer is required by PixieLib:
Portions of this program borrowed from PixieLib.NET, Copyright 2005 Paul DiLascia.
5
The following disclaimer is required by FilterCode:
Copyright © 2011 phpleo
The following disclaimer is required by PlainIt Works JeeGooContext:
Copyright © 2009 - 2010 by Erik van den Berg
The following disclaimer is required by Prototype JavaScript Framework:
Copyright © 2005-2008 Sam Stephenson
The following disclaimer is required by RabbitMQ:
Copyright © 2013 GoPivotal, Inc. All rights reserved
The following disclaimer is required by ScintillaNET:
Copyright © 1998-2006 by Neil Hodgson ([email protected]) All Rights Reserved ScintillaNET bindings are Copyright © 2002-2006 by
Garrett Serack (gserack@gmail.com) All Rights Reserved
The following disclaimer is required by Script.Aculo.Us Web 2.0 JavaScript:
Copyright © 2005-2008 Thomas Fuchs (http://script.aculo.us, http://mir.aculo.us)
The following disclaimer is required by Search Highlighter:
Copyright (c) 2002, 2007, 2008 Stuart Langridge (sil@kryogenix.org)
The following disclaimer is required by Silverlight Menu:
Microsoft Public License (Ms-PL) http://sl3menu.codeplex.com/license
The following disclaimer is required by Silverlight Serializer:
Copyright © Mike Talbot, Microsoft Public License (Ms-PL)
The following disclaimer is required by tipsy:
Copyright (c) 2008 Jason Frame ([email protected]). The software and documentation is released under the MIT license.
https://github.com/jaz303/tipsy/blob/master/LICENSE.
The following disclaimer is required by WPF Themes:
Licensed under the Microsoft Public License (Ms-PL) http://wpf.codeplex.com/license
The following disclaimer is required by WPF Toolkit:
Microsoft Public License (Ms-PL)
The following disclaimer is required by Xmlextras.js:
Copyright © 2006 Erik Arvidsson Licensed under the Apache License, Version 2.
The following disclaimer is required by XNView:
Portions of this product are Copyright © XNView. All rights reserved.
Attn. Government User(s). Restricted Rights Legend
U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or “commercial
computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the
U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the License Agreement, pursuant
to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.
Trademarks
Avid, the Avid Logo, Avid Everywhere, Avid DNXHD, Avid DNXHR, Avid Nexis, AirSpeed, Eleven, EUCON, Interplay, iNEWS, ISIS, Mbox,
MediaCentral, Media Composer, NewsCutter, Pro Tools, ProSet and RealSet, Maestro, PlayMaker, Sibelius, Symphony, and all related
product names and logos, are registered or unregistered trademarks of Avid Technology, Inc. in the United States and/or other countries.
The Interplay name is used with the permission of the Interplay Entertainment Corp. which bears no responsibility for Avid products. All
other trademarks are the property of their respective owners. For a full list of Avid trademarks, see: http://www.avid.com/US/about-avid/
legal-notices/trademarks.
Avid Interplay | MAM User Manager User’s Guide v5.9 • Created 3/20/2017 • This document is distributed by Avid in
online (electronic) form only, and is not available for purchase in printed form.
6
Contents
Symbols and Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
If You Need Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Avid Training Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 1 Getting Started with Interplay | MAM User Manager. . . . . . . . . . . . . . . . . . . . . . 11
About Interplay | MAM User Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Prerequisites for Using User Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User Manager Configuration Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Opening User Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
User Manager Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Navigation Between and Within Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Quitting User Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 2 Working with the General View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Layout of the General View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Allowing Empty Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing the Session Timeout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the External Backend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 3 Working with Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Layout of the Users View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adding a New User Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Assigning Users to Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Editing a User Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Deleting a User Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 4 Working with Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Layout of the Groups View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adding a New Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Assigning Users to Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Assigning Rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Editing Group Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Deleting a Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chapter 5 Working with Rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Layout of the Rights View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding a New Rights-Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Editing a Rights-Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Assigning a Rights-Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Deleting a Rights-Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7
Chapter 6 Working with Tenants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Layout of the Tenants View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding a New Tenant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Assigning Tenants to Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Assigning Rights to Tenants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Editing the Tenant Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Deleting a Tenant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Chapter 7 Working with Sessions and Session Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Layout of the Sessions View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Displaying Session Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Closing Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Layout of the Session Reports View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Retrieving Session Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Viewing Session Reports and Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Exporting Session Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 8 Exporting and Importing User Management Data. . . . . . . . . . . . . . . . . . . . . . . . 51
Layout of the Export View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Understanding Export Dependencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Exporting User Management Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Layout of the Import View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Understanding Import Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Importing User Management Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Appendix Synopsis: User Management Rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Category Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Category Browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Category CacheManagement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Category Cataloging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Category CBA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Category Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Category FileTransfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Category Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Category Import/Export. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Category Ingest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Category Locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Category MultiTenancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Category Picktool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Category Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Category Retrieval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Category Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
8
Category Strata. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Category Stratum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Category Thesaurus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Category Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Category UserManagement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Category VideoAnalysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Category WebBrowsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Category WSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Using This Guide
Congratulations on your purchase of Avid
®
Interplay
®
| Media Asset Manager, a powerful system for
archiving and managing media in a shared storage environment. This guide describes how to use
Avid Interplay | MAM User Manager, an administrative tool that is part of the Interplay MAM
Administrator.
This guide is intended for all users charged with maintaining Interplay Media Asset Manager,
specifically those who need to create and maintain user groups, user accounts and usage rights in
Interplay MAM User Management. This guide contains all the task-oriented instructions and
conceptual information you need to work with the User Manager.
n
All tasks described in this guide can only be performed by users with administrative privileges.
Symbols and Conventions
Avid documentation uses the following symbols and conventions:
Symbol or Convention Meaning or Action
n
A note provides important related information, reminders, recommendations, and
strong suggestions.
c
A caution means that a specific action you take could cause harm to your
computer or cause you to lose data.
w
A warning describes an action that could cause you physical harm. Follow the
guidelines in this document or on the unit itself when handling electrical
equipment.
g
A user tip provides a helpful hint that can aid users in getting the most from their
system.
s
A shortcut shows the user keyboard or mouse shortcuts for a procedure or
command.
> This symbol indicates menu commands (and subcommands) in the order you
select them. For example, File > Import means to open the File menu and then
select the Import command.
This symbol indicates a single-step procedure. Multiple arrows in a list indicate
that you perform one of the actions listed.
Bold font Bold font is primarily used in task instructions to identify user interface items and
keyboard sequences.
Italic font Italic font is used to emphasize certain words and to indicate variables.
Courier Bold font
Courier Bold font identifies text that you type.
Ctrl+key or mouse action Press and hold the first key while you press the last key or perform the mouse
action. For example, Command+Option+C or Ctrl+drag.
10
If You Need Help
If you are having trouble using your Avid product:
1. Retry the action, carefully following the instructions given for that task in this guide. It is
especially important to check each step of your workflow.
2. Check the latest information that might have become available after the documentation was
published. You should always check online for the most up-to-date release notes or ReadMe
because the online version is updated whenever new information becomes available. To view
these online versions, select ReadMe from the Help menu, or visit the Knowledge Base at
www.avid.com/support.
3. Check the documentation that came with your Avid application or your hardware for
maintenance or hardware-related issues.
4. Visit the online Knowledge Base at www.avid.com/support. Online services are available 24
hours per day, 7 days per week. Search this online Knowledge Base to find answers, to view
error messages, to access troubleshooting tips, to download updates, and to read or join online
message-board discussions.
Avid Training Services
Avid makes lifelong learning, career advancement, and personal development easy and convenient.
Avid understands that the knowledge you need to differentiate yourself is always changing, and Avid
continually updates course content and offers new training delivery methods that accommodate your
pressured and competitive work environment.
For information on courses/schedules, training centers, certifications, courseware, and books, please
visit www.avid.com/support and follow the Training links, or call Avid Sales at 800-949-AVID
(800-949-2843).
| (pipe character) The pipe character is used in some Avid product names, such as Interplay |
MAM. In this document, the pipe is used in product names when they are in
headings or at their first use in text.
Symbol or Convention Meaning or Action
1 Getting Started with Interplay | MAM User
Manager
The following topics provide basic information to help you get started using Interplay | MAM User
Manager:
About Interplay | MAM User Manager
Opening User Manager
User Manager Views
Quitting User Manager
About Interplay | MAM User Manager
User Management handles authentication requests and provides account information for each
Interplay Media Asset Manager. For authorization purposes, rights can be defined and assigned to
users, groups, and tenants. A user can be assigned to different groups, but a group always belongs to
exactly one tenant. Users, groups, tenants, and rights are stored in a database (internal users/groups).
Additionally, users and groups can be queried from an LDAP server (currently the ActiveDirectory
and the Posix schema are supported) or WinNT Domain Controller (external users/groups).
To achieve this, Interplay MAM User Management offers an administrative GUI — called User
Manager — that manages the administration of tenants, groups, users, and their access privileges. It
enables you to do the following:
Configure basic User Management settings
Create and edit users
Create and edit groups
Create and edit tenants
Create and edit rights
Display and close sessions of logged-in users
Display and download session reports
Export and import User Management data
Prerequisites for Using User Manager
To use User Manager, you need to be a member of an administrator group that has the following
group rights:
Administration/Platform_Administration
Administration/Query_UserConfiguration
Administration/Modify_UserConfiguration
12
As an administrator you can review and assign these group rights with User Manager. The default
MAM system administrator account is already configured accordingly.
User Manager Configuration Options
Some of the User Manager GUI elements and features are subject to configuration. The default
MAM installation comes with a full set of default configuration settings for User Management. As an
administrator you can review and adapt these configuration settings in the following MAM System
Administrator profiles:
For additional information, see the “Interplay | MAM Configuration Settings Reference” that is
shipped with the software.
Basic Concepts
When working with User Manager, consider the following basic User Management concepts.
Authentication
Authentication of users or system services is performed by the User Management service. For users,
authentication is part of the login procedure, and system services directly authenticate on the API
level. When an authentication is successful, User Management creates a new session and returns an
access key that uniquely identifies this session. The access key will be used for all subsequent
authorization requests. Users in a multiple-tenancy environment can only sign in for the tenant to
which they belong.
The lifetime of the user session is limited; the session is terminated after a configured time span.
However, the session can be actively refreshed to reset its elapsed time. A session is refreshed by
each user action and only ends when a user remains inactive during a time interval that exceeds the
configured time span. System services also have to refresh their sessions within User Management.
They may also create new sessions on demand.
Authentication can be performed by referring to Interplay MAM User Management, or to an external
user management system such as PDC or Active Directory.
For additional information, see “Changing the Session Timeout” on page 17, “Setting the External
Backend” on page 17, and “Working with Sessions and Session Reports” on page 44.
Authorization
Authorization is managed for user groups as well as single users. Users must be members of at least
one user group to have access to usage rights; then they can perform all actions that are granted to the
group. If a user is a member of different groups, the rights granted to the groups are accumulated, and
Profile Section Affected User Manager Views
UserManagementWSAdmin Display General, Users, Groups, Rights
UserManagementWS Authentication General
UserManagementWS Backend General
UserManagementWS Session General, Sessions
UserManagementWS SessionLogging Session Reports
13
the user can perform actions allowed by the accumulated rights. Users who are members of different
tenants only have the rights granted to the groups of the tenant for which they log in. For additional
information, see “Working with Groups” on page 27, and “Working with Rights” on page 34.
Session Reporting
User Management maintains an audit trail in the database that contains information about user and
system sessions that are opened or closed. User Manager has a Session view in which the sessions of
the system accounts bear the name of the components that requested a session. Additionally, User
Manager provides a Session Reports view in which the recorded data can be aggregated for a report
to show the minimum, average, and maximum number of concurrent sessions. For additional
information, see “Working with Sessions and Session Reports” on page 44.
Opening User Manager
User Manager is started from within Interplay MAM Control Center.
To start Interplay MAM User Manager:
1. Do one of the following:
t Open an Internet browser and enter the URL https://<hostname>:9911/ControlCenter/web/
t Double-click the Interplay MAM Control Center icon on your desktop.
The Interplay MAM Control Center login dialog opens.
2. Type your user name and password, and click Login.
Interplay MAM Control Center opens.
3. Click MAM Administrator on the Links pane.
The Interplay MAM Administrator login dialog opens.
4. Type your user name and password, and click Login.
Interplay MAM Administrator opens.
5. Click the User Manager link on the Overview page of Interplay MAM Administrator.
User Manager opens in a new tab.
User Manager Views
Once you have logged in, User Manager opens and displays the view that was set as default (MAM
System Administrator > profile UserManagementWSAdmin > section Display > key StartTab). User
Manager includes the following nine views:
14
Navigation Between and Within Views
Besides simply clicking the tab to open a view, consider the following navigation options.
Navigation Within the View
In the Users, Groups, Tenants, and Rights views, the left pane functions a navigation tree: Clicking
an entry loads the information for the selected element in the other panes of the view. Example: If
you are working in the Groups view and click on “admins” in the Groups pane, the three others panes
(Group Info, Group Rights, and Members) are activated and display the data for the “admins” group.
View Function Refer to...
General Sets basic User Management features
(empty passwords, session time out, and
User Management type).
“Working with the General View” on page 16
Users Creates and edits users accounts, maintains
user data and the assignment of users to
groups.
“Working with Users” on page 20
Groups Creates and edits groups, maintains group
data and the assignment of users to groups.
“Working with Groups” on page 27
Tenants Creates and edits tenants, maintains tenant
data and the assignment of groups to
tenants.
“Working with Tenants” on page 39
Rights Creates and edits rights-keys, and
maintains the assignment of rights to
groups.
“Working with Rights” on page 34
Sessions Monitors the sessions of all logged-in users
and allows the closing of sessions.
“Layout of the Sessions View” on page 45
Session Reports Displays session reports and exports the
reports.
“Layout of the Session Reports View” on
page 47
Export Exports User Management data. “Layout of the Export View” on page 51
Import Imports previously exported User
Management data.
“Layout of the Import View” on page 54
15
Navigation Between Views
In the Users, Groups, Tenants, Rights, and Session views, all entries are linked: Clicking an entry
opens the corresponding view and selects the entry in the new view. Example: If you are working in
the Groups view and click the Administration/WSM link in the Group Rights pane, the Rights view
is opened automatically; within the Rights view the Administration/WSM right is selected.
Quitting User Manager
When you are finished using User Manager quit the application.
To quit the application:
t Click the X in the User Manager tab.
User Manager quits, but both Interplay MAM Control Center and Interplay MAM Administrator
remain open. You can resume working in both applications or quit.
2 Working with the General View
In most cases you will start using the General view of User Manager — here you set up basic User
Management features. The following topics provide information about the basic options of the
General view:
Layout of the General View
Allowing Empty Passwords
Changing the Session Timeout
Setting the External Backend
Layout of the General View
The General view is arranged in three sections that provide information and controls to set up basic
User Management functions. The following illustration and table describe the layout of the General
view.
Element Description
1 Version Shows the version number of the MAM services User Management WS and User
Management WS Admin (= User Manager).
2 User Management
Settings
Configures basic User Management settings: Empty password and Session
timeout. For additional information, see “Allowing Empty Passwords” on page 17
and “Changing the Session Timeout” on page 17.
3 External Backend Sets and configures the used external User Management type: None, LDAP, or
Windows NT (PDC). For additional information, see “Setting the External
Backend” on page 17.
17
Allowing Empty Passwords
You can create new users by entering a user ID and user name. This type of user does not need a
password to log in to Interplay | MAM. By default, this feature is disabled. To create users without
passwords you must activate the Allow empty passwords feature. You can do this as described in the
following procedure, or by using the MAM System Administrator > profile UserManagementWS >
section Authentication > key AllowEmptyPassword.
To allow empty passwords:
1. Open the General view.
2. Select the Allow Empty Passwords check box.
It takes some time — usually a couple of minutes — until User Management WS updates this
change. It must finish the update before you can add users without a password.
Changing the Session Timeout
Interplay MAM User Management ends inactive user sessions automatically after a predefined
period (60 minutes, by default). Every time a user performs an action the session counter is set back
to zero; as long as the user performs at least one action during the configured session timeout period,
their session will not close automatically. You can change the session timeout as described in the
following procedure, or by using the MAM System Administrator > profile UserManagementWS >
section Session > key Timeout.
To change the session timeout:
1. Open the General view.
2. Overwrite the value in the Session Timeout field.
3. Click Set.
The changed value is applied immediately.
Setting the External Backend
Information about users and groups can be retrieved from the internal database or queried from an
external backend (either an external LDAP server or WinNT Domain Controller). You can configure
the external backend as described in the following procedure, or by using the MAM System
Administrator > profile UserManagementWS > section Backend/External > key Type and by using
the sections Backend/External/LDAP and Backend/External/WinNT.
To set the User Management type:
1. Open the General view.
2. Click the Edit External Backend button.
The Edit Backend dialog opens.
3. Select the backend from the Type list:
t None: No external backend is used
t Ldap: An external LDAP server is used (Active Directory, for example)
18
t Windows NT (PDC): An external Windows Domain Controller is used (pre Active
Directory)
4. (Option) If you have selected “Ldap,” specify the following fields:
5. (Option) If you have selected “Windows NT (PDC),” specify the following fields:
Field Function
Schema The LDAP schema used by the directory service. Values are: ActiveDirectory or Posix.
BaseDN The root node (DN) of the LDAP tree that is queried for users and groups.
User Filter An LDAP filter expression that is applied to user searches.
Group Filter An LDAP filter expression that is applied to group searches.
Host Name The host name of the LDAP server. This is the fully qualified domain name of the
server.
Port The port of the LDAP server. If the port is “0,” the default port is used.
BindDN The BindDN (user object) for the client authentication of ADS queries. This can be a
DN (distinguished name in LDAP format), UPN (user principal name,
user@somewhere) or windows account name (without domain).
Password The encrypted password of the user represented by the BindDN.
19
6. Click OK.
The Edit backend dialog is closed. Your settings are saved and applied immediately.
Since your MAM installation includes mapping files for supported external backends, all required
mappings are performed automatically. The mapping files can be found in Interplay MAM System
Administrator > User Data tab > Folders UserManagement/ActiveDirectory, UserManagement/
Posix, and UserManagement/WinNT. For additional information, see the Interplay | MAM System
Administrator User’s Guide.
Field Function
Domain Domain name of the Windows NT domain
User User name for client authentication
Password Encrypted password of the user
3 Working with Users
In the Users view, you can add new users to Interplay MAM local User Management, or remove
users who no longer need access. You can assign users to user groups, change the passwords of users,
and edit their personal data. Additionally, you can see the date and time when the user last logged in
to Interplay MAM.
The following topics provide information about the basic actions you can perform on user accounts:
Layout of the Users View
Adding a New User Account
Assigning Users to Groups
Assigning Rights
Editing a User Account
Deleting a User Account
Layout of the Users View
The Users view includes four panes that provide controls to set up and edit user accounts. The
following illustration and table describe the layout of the Users view.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Avid Interplay MAM 5.9 User Manager User guide

Category
Software
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI