Highwood AD-CHCA2-TAU Operating instructions

AD-CHCA2-TAU
Highwood
Brand
Highwood
Model
AD-CHCA2-TAU
Type
Operating instructions
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
1) Insert an A bolt into lower hole to on each side
attach Seat to Back. Make sure the back is fully upright.
Make bolts snug, but do not overtighten.
AD-CHCA2
10.13.16
A
x18
1/4"-20 x 1-3/4"
A
A
RIGHT LEG
SEAT
2) Attach Right Leg to
Seat using three A bolts.
Note: arm above back support
DETAIL A
SCALE 0.16 : 1
C
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
AD-CHCA2
10.13.16
3) Attach Footrest to Right Leg using 4 A bolts.
4) Flip chair and lay on right side.
Repeat steps 2 and 3 for Left Leg.
5) Attach arms to the back using 2 A bolts.
6) Tighten all bolts. Enjoy your highwood chair!
A
Note: Footrest faces front of chair
RIGHT LEG
ARM
BACK
FOOTREST
A
Note: Two bolts insert here
  • Page 1 1
  • Page 2 2

Highwood AD-CHCA2-TAU Operating instructions

AD-CHCA2-TAU
Highwood
Brand
Highwood
Model
AD-CHCA2-TAU
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents