2. Allen + Roth
  3. 310168-CS
310168-CS

Allen + Roth 310168-CS User manual

  • Hello! I am an AI chatbot trained to assist you with the Allen + Roth 310168-CS User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Color: Option 1 Group Room Location
CUSTOMER INFORMATION
Customer Name
Address
City, State, Zip
Primary Phone
Email
Preferred Method of Contact:
Interested in Lowe’s Financing Options?
Budget:
Phone Email
Yes No
$
KITCHEN COUNTERTOP
MEASURE GUIDE
COUNTERTOP INFORMATION: DRAWINGS REQUIRED
Install on existing cabinets New cabinets being installed
Room:
Kitchen Bath Mudroom Other
Countertop Removal Required: YES, Existing Countertop Type NO
Overhang Required: YES, Location NO
Edge Profile:
Eased
Half Bullnose
Ogee
Double Radius
Sink:
Farm House/Apron Undermount Cast IronDrop-in Sink
Bevel Bullnose
Brand:
Option 2 Group Room Location
RESET601881_CORP_Services Measure Guide.pdf 2 3/5/20 9:09 AM
Approx. Countertop Square Footage (See page 2 ):
Countertop Backsplash:
YES, Height NO
Material:
Granite Quartz Solid Surface Butcher Block
Integral Undermount SS
Scan QR code
for more
information
Upload your completed Kitchen Countertop Measure Guide at:
www.sagesurfaces.com/virtual-design
Porcelain
KITCHEN COUNTERTOP
MEASURE GUIDE
Countertops are sold by square footage (sq ft). Pricing is listed as price per sq ft. To estimate your pricing, use the steps below:
Tools Needed:
• Tape measure
• Pen
• Paper
• Calculator
How to Measure:
1. Draw a diagram of your countertop space on the paper.
2. Include the spaces for your sink, cooktop, bar sink, etc.
3. Indicate where there are walls in the space (if possible).
4. Measure the countertop length from wall to wall (in inches).
5. Write down the length in the appropriate space on your drawing.
6. Measure the depth of the countertops from the wall.
*Standard countertop depth is 26 inches (overhang of cabinets).
7. Repeat this process for every section of your countertop.
8. Make sure to measure bar tops, islands, peninsulas, etc.
DON’T FORGET TO TAKE A PICTURE OF YOUR SPACE
How to Calculate Sq Ft:
Subtotal =
Round up to whole number =
Length (x) Depth (=) Area (÷) 144 (=) Sq Ft
x = =÷ 144
x = =÷ 144
x = =÷ 144
x = =÷ 144
x = =÷ 144
Example:
SINK
RANGE
WALL
30-in
142-in
57-in
26-in
46-in
DISHWASHER
139-in
67-in
42-in
GET IT
INSTALLED
RESET601881_CORP_Services Measure Guide.pdf 1 3/5/20 9:09 AM
Upload your completed Kitchen Countertop Measure Guide at:
www.sagesurfaces.com/virtual-design
/