2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. Control Cover Kit, TR-34D Trench Roller

Toro Control Cover Kit, TR-34D Trench Roller Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Control Cover Kit, TR-34D Trench Roller Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3377-640RevB
ControlCoverKit
TR-34DTrenchRoller
ModelNo.68070
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Disconnectthebattery.
Nopartsrequired
–
Drilltheholes(machineswithoutexistingholes).
Cover
1
Latchclip1
Latchmountassembly1
Catchmountassembly
1
Washer(5/16inch)
2
Hex-socketbolt(1/4x5/8inches)
13
Hex-socketbolt(1/4x1-1/4inches)
2
Flangenut(1/4inch)
15
Installthecontrolcover.
DisconnectingtheBattery
1.Opentherearhood;refertotheOpeningtheHood
sectionintheOwner’ sManual
2.Loosenthenutandboltsecuringthenegative-cable
clamptothebatterypost,andremovetheclampfrom
thebattery.
Note:Ensurethatthenegative-cableclampdoesnot
contactthebatterypost.
DrillingtheHoles(Machines
withoutExistingHoles)
1.Covertherearcompartmentofthemachinewith
adropclothtoprotectthecomponentsinthe
compartmentfrommetalshavingsthatwillbecreated
whiledrillingmountingholesforthecontrolcover.
2.Alignthecoverlefttorightoverthecontrolpanel
(
Figure1).
3.Whilekeepingthehoodcentered,alignthebottom
edgeofthecovertotherearedgeofthehood(Figure
1).
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3377-640*B
G021638
1
2
3
4
5
6
Figure1
1.Rearedgeofthehood4.Cover
2.Bottomedgeofthecover
5.Holesincover
3.Hingedcover6.Alignthecovertotheedge
ofthehood
4.Usingthecoverasatemplate,marktheoutlineofthe
holesontherearhood(Figure2).
5.Removethecoverfromthemachine.
6.Center-punchthehoodatthemarkedlocationscreated
instep4.
7.Drill7holesintotherearhoodwitha9/32inchdrill
bitatthecenter-punchmarks(Figure2).
g021622
2
1
1
Figure2
1.Markanddrill9/32inch
holeshere
2.Usethecoverasa
template
8.Removethedropclothundertherearhoodand
components.
2
InstallingtheControlCover
1.Installthecovertotherearhoodwith7hex-socket
bolt(1/4x5/8inches)and7angenuts(1/4inch)
(Figure3).
Note:Applyathread-lockingcompound.
g021624
1
2
Figure3
1.Hex-socketbolt(1/4x5/8
inches)
2.Flangenuts(1/4inch)
2.Installthelatchmountassemblytothemachinewith2
hex-socketbolts(1/4x5/8inches)and2angenuts
(1/4inch)(
Figure4).
Note:Removeanystickersblockingtheholes.
Note:Applyathread-lockingcompound.
g024194
3
2
4
1
Figure4
1.Cutslotsoutindecal3.Hex-socketbolt(1/4x5/8
inches)
2.Latchmountassembly
4.Flangenuts(1/4inch)
3.Assemblethelatchcliptothelatchmountwith2
hex-socketbolts(1/4x1-1/4inches),2washers(5/16
inch),and2angenuts(1/4inch)(Figure5).
Note:Applyathread-lockingcompound.
1
2
3
4
g024193
Figure5
1.Hex-socketbolt(1/4x
1-1/4inches)
3.Latchclip
2.Washer
4.Flangenuts(1/4inch)
4.Installthecatchmountassemblytothemachinewith4
hex-socketbolts(1/4x5/8inches)and4angenuts
(1/4inch)(Figure6).
1
2
3
g024192
Figure6
1.Flangenuts(1/4inch)3.Hex-socketbolt(1/4x5/8
inches)
2.Catchmountassembly
5.Connectthenegativebatterycabletothebattery.
3
/