Perky-Pet 130TF Installation guide

Type
Installation guide
See our full line of Perky-Pet
®
birdfeeders and accessories at www.perkypet.com
855-757-5973 | Woodstream Corporation | 69 N. Locust Street Lititz, PA 17543, USA
“Perky’s Finest” Top Fill
Glass Hummingbird Feeder
Model #130TF
Filling Instructions:
1. Remove lid.
2. Pour nectar into bottle.
3. Replace lid and hang feeder. To
use ant moat: Fill basin on top
of lid with water.
Disassembly and cleaning
instructions:
1. Remove lid and unscrew
bottle from base.
2. Separate the two halves
of the base.
3. Remove plug, disc and flowers.
4. Clean with warm soapy water.
5. Rinse thoroughly.
To Reassemble:
1. Insert disc and plug into base.
2. Replace top half of base.
3. Allign flower prongs and push
into holes.
4. Screw bottle into base.
Ant Moat
Lid
Bottle
Base Top
Plug
Disc
Base
Bottom
  • Page 1 1

Perky-Pet 130TF Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI