Perky-Pet 5107-4 Installation guide

See our full line of Perky-Pet

birdfeeders and accessories at www.perkypet.com

855-757-5973 | Woodstream Corporation | 69 N. Locust Street Lititz, PA 17543, USA

Pole Placement:

1. To prevent squirrels from jumping onto your feeder,

try and locate it at least 12’ from any wall, post, or

tree. Also have the feeder hang from at least 4 ft

from the ground. (Fig. 1)

Assembling the Pole:

1. Dig a hole approximately 12” deep. Place sleeve in

hole and backﬁll. If you choose to drive the pole into

the ground, use extra care and cusion the pole with a

wooden block.

2. Assemble the four sections of poles and place into

groud sleeve (Fig. 2).

3. If needed, select and assemble either the extension

arm or ﬂat bottom adapter. Use the extension arm

for hanging-only bird feeders. These are feeders that

cannot be placed directly on the pole. When using

the extension arm, be sure the arm is completely

separated on the tip of the pole. Use the ﬂat bottom

wood feeder adapter for the pole. Be sure to center

the adapter on the feeder for proper balance on the

pole.

Universal Bird Feeder Pole

Model #5107-4

Parts:

(Fig.1) (Fig. 2)