Everbilt 9235954 Operating instructions

Everbilt
Brand
Everbilt
Model
9235954
Type
Operating instructions

This manual is also suitable for

Everbilt 9235954 is a European Hinge for Frameless Furniture with Inset Door Mounting. It is designed for use on frameless furniture with the doors positioned inside the front of the cabinet. When installed successfully, these hinges can open to a maximum of 95°. The package includes two hinges, two mounting plates, and eight #5 x 5/8 in. screws. The hinge requires a 1/6 in. drill bit and a 35 mm boring bit (Forstner bit) for installation. It is recommended to use 2 hinges for doors up to 3 ft, 3 hinges for doors up to 5.2 ft, 4 hinges for doors up to 6.5 ft, and 5 hinges for doors up to 7.

Everbilt 9235954 is a European Hinge for Frameless Furniture with Inset Door Mounting. It is designed for use on frameless furniture with the doors positioned inside the front of the cabinet. When installed successfully, these hinges can open to a maximum of 95°. The package includes two hinges, two mounting plates, and eight #5 x 5/8 in. screws. The hinge requires a 1/6 in. drill bit and a 35 mm boring bit (Forstner bit) for installation. It is recommended to use 2 hinges for doors up to 3 ft, 3 hinges for doors up to 5.2 ft, 4 hinges for doors up to 6.5 ft, and 5 hinges for doors up to 7.

THANK YOU
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you
for choosing Everbilt!
USE AND CARE GUIDE
EUROPEAN HINGE FOR FRAMELESS FURNITURE –
INSET DOOR MOUNTING
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Item # 1002 782 616
Model # 9235954
2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Installation .....................................3
Planning Installation ...............................3
Tools Required ....................................3
Package Contents .................................3
Recommended Number of Hinges Per Door Size. . . . . . . . . . 3
Installation ........................................5
Safety Information
Please read and understand this manual before installing this
product.
CAUTION: Always be cautious when using power tools.
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from
defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product
or, at the Manufacturer’s option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy
under this or any other warranty on the product, whether expressed or implied.
For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726.
3 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Ensure all parts listed in the Package Contents section are included and that you have the listed Tools Required on hand. If any part is
missing or damaged, contact customer service.
When planning your installation, ensure the hinge is oriented in its nal position as shown. This hinge is intended for inset applications on
frameless furniture with the doors positioned inside the front of the cabinet.
When installed successfully, these hinges can open to a maximum of 95°.
90°
95°
TOOLS REQUIRED
#2 Screwdriver Pencil or Scribe
Ruler (in.
and mm)
Drill 1/6 in. Drill bit
35 mm boring
bit (Forstner
bit)
4
Pre-Installation (continued)
PACKAGE CONTENTS
B
A
C
Part Description Quantity
A Hinge 2
B Mounting Plate 2
C #5 x 5/8 in. Screw 8
RECOMMENDED NUMBER OF HINGES PER DOOR SIZE
Use this diagram to determine how many hinges you will need for your door. If you are hanging a door with a mirror or a door that is wide,
you will need additional hinges.
3 ft
3x
5.2 ft
6.5 ft
7.8 ft
2x
4x
5x
≤ 17 lbs
(≤ 7.7 kg)
≤ 30 lbs
(≤ 13.7 kg)
≤ 39 lbs
(≤ 17.7 kg)
≤ 48.5 lbs
(≤ 22 kg)
5 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Installation
1
Pre-drilling the installation holes
□ Use a pencil and tape measure to measure and mark the
installation locations as this diagram shows.
□ Then use a 1/16 in. drill bit to drill the cabinet holes and a
1-3/8 in. (35 mm) boring bit to drill the door hole. Ensure
the door hole is no deeper than 33/64 in. (13 mm). Do not
drill through either the door face or the cabinet.
BA
1-3/8 in. (35 mm)
Edge of Door Edge of Cabinet
7/8 in.
(21.5 mm)
ø 1-3/8 in.
(35 mm)
2
Installing the hinges to the door
□ Insert each hinge (A) into the pre-drilled holes in the door
and secure using two screws (C) for each hinge (A).
A
C
1-1/4 in.
(32 mm)
13/64 in.
(ø5 mm)
1-7/16 in.
(37 mm) + Door thickness
CabinetDoor
6
Installation (continued)
3
Installing the mounting plates to the
cabinet
□ Align the mounting plates (B) to the pre-drilled holes and
fasten with two screws (C) for each mounting plate (B).
B
C
4
Installing the door to the cabinet
□ Open the hinges (A) to the fully-extended position.
□ Slide each hinge arm (A) to the mounting plates (B) and
tighten the screw (1) on each plate (B) to secure in place.
B
A
1
5
Adjusting the door
□ Height Adjustment: Loosen the top mounting screw (1) to
adjust the door up or down.
1
□ Overlay Adjustment: Turn the adjustment screw (2) to adjust
the door overlay.
2
□ Depth Adjustment: Turn the eccentric screw (3) to adjust
the distance of the doors from the cabinet.
3
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Everbilt 9235954 Operating instructions

Everbilt
Brand
Everbilt
Model
9235954
Type
Operating instructions
This manual is also suitable for

Everbilt 9235954 is a European Hinge for Frameless Furniture with Inset Door Mounting. It is designed for use on frameless furniture with the doors positioned inside the front of the cabinet. When installed successfully, these hinges can open to a maximum of 95°. The package includes two hinges, two mounting plates, and eight #5 x 5/8 in. screws. The hinge requires a 1/6 in. drill bit and a 35 mm boring bit (Forstner bit) for installation. It is recommended to use 2 hinges for doors up to 3 ft, 3 hinges for doors up to 5.2 ft, 4 hinges for doors up to 6.5 ft, and 5 hinges for doors up to 7.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents