THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase
of this hinge. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Everbilt!
USE AND CARE GUIDE
WIDE-ANGLE HINGE
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Item # 1002 782 607
Model # 9235927
924393800
Please read and understand this
manual before installing this product.
CAUTION:
Always be cautious when using power tools.
Safety Information
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original
consumer purchaser that the product will be free from defects in material and
workmanship. If the product does not comply with this warranty, the
Manufacturer will repair or replace the product or, at the Manufacturer’s option,
refund the purchase price. Repair, replacement, or refund of the original
purchase price is your sole remedy under this or any other warranty on the
product, whether expressed or implied.
For additional details and questions,
please contact Everbilt Customer Service at 1-800-305-1726.
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-800-305-1726
HOMEDEPOT.COM
Pre-Installation
PLANNING INSTALLATION
Ensure all parts listed in the Package Contents section are included and that you have the
listed Tools Required on hand. If any part is missing or damaged, contact customer service.
When planning your installation, ensure the hinge is oriented in its final position as shown:
DOOR
SIDE PANEL
Frameless Face Frame
When installed successfully, these hinges can open to a maximum of 160°.
160°
These hinges can be installed in frameless and face frame cabinetry. Ensure that you choose
the correct mounting plate in the Package Contents for your task.
Pre-Installation
TOOLS REQUIRED
#2 Screwdriver Pencil or Scribe Ruler (in.
and mm)
Drill 1/6 in. Drill bit 35 mm boring
bit (Forstner bit)
PACKAGE CONTENTS
B
A
C
D
Part Description Quantity
A Wide Angle Hinge 2
B Frameless Mounting Plate 2
C Face Frame Mounting Plate 2
D #8 x 5/8 in. Screw 8
Pre-Installation
RECOMMENDED NUMBER OF HINGES PER DOOR SIZE
Use this diagram to determine how many hinges you will need for your door. If you are hanging
a door with a mirror or a door that is wide, you will need additional hinges.
36 in.
3x
56 in.
80 in.
92 in.
2x
4x
5x
9 – 13 lbs 14 – 26 lbs 27 – 37 lbs 38 – 50 lbs
SPECIFICATIONS
Door thickness should be 3/4 in. (19 mm) or 1 in. (25 mm).
Placing several cabinets together requires that an amount of the opening (reveal) must show
between the door for the door to properly open and close:
Side Panel
Door
Side Panel
Door
Reveal
Door Minimum Reveal
3/4 in. (19 mm) thick 1/16 in. (2 mm)
1 in. (25 mm) thick 1/8 in. ( mm)
Installation
1
Pre-drilling the installation holes
□ Use a pencil and tape measure to measure and mark the installation locations
as this diagram shows.
□ Then use a 1/16 in. drill bit to drill the cabinet holes and a 35 mm boring bit to drill
the door hole. Ensure the door hole is no deeper than 15/35 in. (12 mm).
Do not drill through the either the door face or the cabinet.
2
Installing the hinges
to the door
□ Insert each hinge (A) into the pre-drilled
holes in the door and secure using
two screws (C) for each hinge (A).
A
C
1-3/8 in.
(35 mm)
Door
3/16 in. (5 mm)
1-17/16 in.
(37 mm)
1-1/4 in.
(32 mm)
3/16 in. (5 mm)
7/8 in.
(21.5 mm)
A
B C
ø1-3/8 in.
(35 mm)
1-1/4 in.
(32 mm)
Installation
3
Installing the mounting
plates
□ Align the mounting plates (B or C) to
the pre-drilled holes and fasten to
the cabinet using two screws (D) per
mounting plate (B or C).
4
Installing the door to
the cabinet
□ Open the hinges (A) to the
fully-extended position.
□ Connect the hinge arms (A) to the
mounting plates (B or C) and press the
hinge arms (A) down until they snap to
the plates (B or C).
B
C
D
D
Frameless
Face Frame
1
2
B/C
A
Installation
5
Adjusting the door
□ Height Adjustment: Loosen the top mounting screw (1)
to adjust the door up or down.
□ Overlay Adjustment: T
urn the adjustment screw (2)
to adjust the door overlay.
□ Depth Adjustment: T
urn the eccentric screw (3)
to adjust the distance of the doors from the cabinet.
1
2
3
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Everbilt 9266777 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hettich 9235951 Operating instructions
-
Everbilt 9235954 Operating instructions
-
-
-
-
Everbilt 9265514 Installation guide
-
Everbilt 9236029 Operating instructions
-
-
-