Glacier Bay 5318WWHD Installation guide

THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this wall cabinet.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products

available for your home improvement needs. Thank you for choosing Glacier Bay!

USE AND CARE GUIDE

WALL CABINET

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER

HOMEDEPOT.COM/GLACIERBAY

Item #1004 101 724, 1004 101 708

Model #5318WWHD, 5318GYHD

2

Table of Contents

Safety Information

Table of Contents ...................................2

Safety Information ..................................2

Warranty ..........................................2

Pre-Assembly ......................................3

Planning Assembly .................................3

Package Contents .................................5

Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation .......................................14

Care & Cleaning ...................................19

□ Read through this entire manual prior to assembly and installation.

Warranty

ONE YEAR LIMITED WARRANTY

WHAT IS COVERED

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty.

Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace

FREE OF CHARGE any product or parts that proves defective. Simply return the product/part to any of The Home Depot retail locations or

call 1-855-HD-GLACIER to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser

must be made available for all Glacier Bay warranty claims.

WHAT IS NOT COVERED

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse, or normal wear and tear. This warranty

excludes all industrial, commercial, and business usage, whose purchasers are hereby extended a ve year limited warranty from the

date of purchase, with all other terms of this warranty applying except the duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations

may not apply to you. This warranty gives you specic legal rights and you may also have other rights that vary from state to state and

province to province. Please see a store or contact 1-855-HD-GLACIER for more details.

CAUTION: Before cutting, drilling, or hammering into any wall

surface, verify the location of electrical, plumbing, and gas lines.

Cutting any of these may cause serious injury.

3 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Assembly

PLANNING ASSEMBLY

□ Identify all parts and hardware pieces before you begin.

□ When laying out parts, place them on a soft surface to prevent scratching.

TOOLS REQUIRED

Phillips

screwdriver

Hammer Pencil Drill Level

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Some of the hardware offered may be more than needed,

please keep them as spare parts.

AA Cam bolt x 10

BB Cam x 10

CC Dowel x 10

DD Wood screw x 4

4

[Heading goes here]

Pre-Assembly (continued)

HARDWARE INCLUDED

(continued)

NOTE: Hardware not shown to actual size.

Some of the hardware offered may be more than needed,

please keep them as spare parts.

EE Door handle x 2

FF Door handle screw x 4

GG Hinge x 4

HH Hinge screw x 16

II

Magnet x 1

JJ Magnet screw x 2

5 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Pre-Assembly (continued)

HARDWARE INCLUDED (continued)

NOTE: Hardware not shown to actual size.

Some of the hardware offered may be more than needed,

please keep them as spare parts.

KK Magnet strike x 2

LL Magnet strike screw x 2

MM Shelf pin x 4

NN Cam cover x 10

OO Mounting screw x 4

PP Wall anchor x 4

6

Pre-Assembly (continued)

PACKAGE CONTENTS

A Top Panel x 1

B Bottom Panel x 1

C Left Side Panel x 1

D Right Side Panel x 1

E Hanging Rail x 1

F Wall Cleat x 1

G Fixed Shelf x 1

H Adjustable Shelf x 1

I

Back Panel x 1

J Left Side Door x 1

K Right Side Door x 1

I

E

C

D

A

H

G

B

J

K

F

7 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Assembly (continued)

1

Attaching the hinges

□ Attach the hinges (GG) to the side panel (C and D) using the

hinge screws (HH).

□ Attach the cam bolts (AA) to the side panels (C and D).

□ Insert cams (BB) to the side panels (C and D) and note the

direction of the arrow on the cams (BB), as shown.

arrow direction

C

D

BB

AA

BB

HH

GG

HH

GG

HH

GG

C

GG

8

Assembly (continued)

2

Inserting cams into the hanging rail and

the xed shelf

□ Insert cams (BB) into the hanging rail (E) and the xed shelf (G)

and note the direction of the arrow on the cams (BB), as shown.

arrow direction

E

G

BB

9 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Assembly (continued)

3

Attaching the side panels to the

hanging rail and the

xed shelf

□ Insert the dowels (CC) into the side panels (C and D).

□ Attach the side panel (C) to the hanging rail (E) and the xed

shelf (G).

□ Attach the side panel (D) to the hanging rail (E) and the xed

shelf (G), as shown.

□ Tighten the cams (BB) by turning them clockwise until snug,

do not overtighten cams (BB).

G

E

C

D

BB

CC

BB

CC

10

[Heading goes here]

4

Attaching the bottom panel

□ Insert the dowels (CC) into the side panels (C and D).

□ Attach the bottom panel (B) to the side panels (C and D) using

the wood screws (DD), as shown.

Assembly (continued)

C

D

B

CC

DD

CC

B D

11 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Assembly (continued)

5

Inserting the back panel

□ With the tape side of the back panel (I) facing out, slide it down the

notch on the side panels (C and D), as shown.

□ Then insert the back panel (I) into the notch on the bottom panel (B).

notch in the side

panels (C and D)

C

D

I

C

B

tape side of the

back panel (I) facing out

12

[Heading goes here]

Assembly (continued)

6

Attaching the magnet to top panel

□ Attach the cam bolts (AA) to the top panel (A).

□ Attach the magnet (II) to the top panel (A) using the

magnet screws (JJ), as shown.

A

AA

JJ

II

13 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Assembly (continued)

7

Attaching the top panel to the

side panels

□ Insert dowels (CC) into the side panels (C and D).

□ Attach the top panel (A) to the side panels (C and D), making

sure the back panel (I) is inserted into the notch of the

top panel (A).

□ Tighten the cams (BB) by turning them clockwise until

snug, do not overtighten cams (BB).

A

CC

BB

I

C

D

14

[Heading goes here]

Installation

8

Attaching the wall cleat to the wall

NOTE: Before cutting, drilling, or hammering into any wall

surface, verify the location of electrical, plumbing, and gas

lines. Cutting any of these may cause serious injury.

□ In the desired location place the unit against the wall. Make

sure the unit is level and lightly draw a horizontal line where

the top panel (A) meets the wall.

□ Measure down from that line approximately 3.5 in. and, using

a level, lightly draw a horizontal line that is approximately 12 in.

□ Line the top of the wall cleat (F) with that line and, making

sure the wall cleat (F) is level, mark the location on the wall

through the mounting holes.

□ Drill holes in the marked spots on the wall. Note, if the

mounting screws (OO) will not be going directly into studs,

insert the wall anchors (PP).

□ Mount the wall cleat (F) to the wall, using the mounting

screws (OO), as shown.

top of

wall cleat (F)

approximately

3.5 in. down

F

PP

OO

top of unit mark

measure down

approximately 3.5 in.

15 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Installation (continued)

9

Attaching the cabinet to the wall

NOTE: Before cutting, drilling, or hammering into any wall

surface, verify the location of electrical, plumbing, and gas

lines. Cutting any of these may cause serious injury.

□ Mount the hanging rail (E) onto the wall cleat (F) and mark

the location on wall through the mounting holes.

□ Drill holes in the marked spots on the wall. Note, if the

mounting screws (OO) will not be going directly into studs,

insert the wall anchors (PP).

□ Mount the hanging rail (E) onto the wall cleat (F) and attach

to the wall, using the mounting screws (OO), as shown.

wall cleat (F)

hanging rail (E)

wall cleat (F)

OO

PP

wall

16

[Heading goes here]

Assembly (continued)

10

□ Attach the door handles (EE) to the doors (J and K) using the

door handle screws (FF).

□ Make sure the raised dimples on the magnet strike (KK) are

facing the doors (J and K) and attach using the magnet strike

screw (LL), as shown.

Attaching the door handles

hinge

mounting holes

J

K

FF

KK

FF

EE

LL

KK

LL

K

17 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Assembly (continued)

11

□ Attach the doors (J and K) using the hinge screws (HH),

as shown.

Attaching the door to the assembly

K

J

HH

J

HH

18

[Heading goes here]

Assembly (continued)

12

□ To make horizontal adjustments see gure 1.

□ To make vertical adjustments see gure 2.

Adjusting the doors

door

hinge

gure 1

(horizontal adjustment)

gure 2

(vertical adjustment)

19 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

[Heading goes here]

Care and Cleaning

□ Cleaning with a dry cloth may be sufcient.

□ For other stains or marks, wipe gently with a damp cloth.

□ Do not use strong detergents or abrasive cleaners; they may damage the surface of this product.

cam covers (NN)

13

□ Insert the adjustable shelf (H), using the shelf pins (MM).

□ Use the cam covers (NN) to cover all cams (BB).

Inserting adjustable shelf

Assembly (continued)

H

MM

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER

HOMEDEPOT.COM/GLACIERBAY

Retain this manual for future use.

IS5318-I

Page is loading ...

Glacier Bay 5318WWHD Installation guide

This manual is also suitable for

Glacier Bay 5318WWHD Installation guide

in other languages

Related papers

Other documents