Novatto GF-011BN-C-PUD User manual

Novatto
Brand
Novatto
Model
GF-011BN-C-PUD
Type
User manual

Novatto GF-011BN-C-PUD is a vessel sink drain designed for use with glass and porcelain sinks. It features a pop-up design with a brushed nickel finish, and comes with a mounting ring to elevate the sink and provide stabilization. The drain has a 1.625-inch counter hole requirement and includes all necessary components for installation. It is easy to install and use, and its pop-up design allows for easy access to the drain and prevents water from overflowing. With its brushed nickel finish, it adds a touch of elegance to any bathroom or kitchen sink.

Novatto GF-011BN-C-PUD is a vessel sink drain designed for use with glass and porcelain sinks. It features a pop-up design with a brushed nickel finish, and comes with a mounting ring to elevate the sink and provide stabilization. The drain has a 1.625-inch counter hole requirement and includes all necessary components for installation. It is easy to install and use, and its pop-up design allows for easy access to the drain and prevents water from overflowing. With its brushed nickel finish, it adds a touch of elegance to any bathroom or kitchen sink.

Sink
Thin So Rubber Washer
(with drain)
Drain
Pop-up, Umbrella,
or Strainer Drain
Mounng Ring
(if included)
White Rubber Washer
Top View
Floor
Counter
16” - 22”
28” - 30”
Suggested
34” - 37” Suggested
6” - 7”
5.5” - 6”
Counter
(not included)
Concave Washer
Firm Washer
Nut
Tail Pipe
DO NOT OVER TIGHTEN THE DRAIN!
1.5 - 1.625” Hole
(depending on drain)
Mounng Ring
(if included)
TROUBLESHOOTING TIPS
SoluonReasonIssue
Use mounng ring with silicone;
ghten drain
Mounng ring not used; drain is loose
Make sure correct seal is used and
is below bevel
Pop-up is too high; wrong seal used
Tighten the fastener under
the countertop
Drain has come looseLeakage under sink
Does not completely drain
Sink wobbles or is loose
ASSEMBLY
Mounng Ring
(if included)
INSTALLATION INSTRUCTIONS
Please Note:
• Unpack the box and ensure all parts are included.
• Review and abide by all building and plumbing codes.
• Novao drains need to be installed by a professional.
• Disassemble drain and save ALL components.
• Place the vessel on top of the counter and make sure
the drain ts down inside of the counter. If a mounng
ring is used, place it under the sink. The mounng ring
will elevate the sink ½” and provide stabilizaon.
• Use bead of silicone to seal between exterior of vessel
where it is mounted to the mounng ring or counter.
• Use a level to ensure the vessel is level in every
direcon and install the drain.
• Align drain of the sink and tail pipe then parally thread
drain body to tail pipe.
• Connect tail pipe to plumbing then rmly thread drain
to tail pipe.
• Secure the vessel to the counter with fastener on the
drain. Be sure to not over ghten the drain assembly.
Hand ghtening will be sucient.
TOOLS NEEDED FOR ASSEMBLY
(not included)
Clear Silicone
Quesons, problems, missing parts? Before returning, call our customer service
department at 844.404.4242, 8:00 a.m. - 5 p.m., MST Monday - Friday or e-
mail us at: [email protected]
We would like to take this opportunity to thank
you for choosing Novao. We hope you are
truly sased with our product(s) and enjoy it
for years to come. As a small business, we learn
the most from you, the customer. Please visit
the link below to leave us a review and we’ll
reward you with a $25 Amazon or Visa gi card.
THANK YOU
It’s easy as...
• Go to novaoinc.com
• In the top le, click “product registraon
and review”
•
Find your product model
• Review, submit... enjoy!
Pop-up Drains (w/o Overow):
PUD-BN • PUD-CH • PUD-ORB
Strainer Drains:
STD-BN • STD-CH • STD-ORB
Umbrella Drains (w/o Overow):
UPD-BN • UPD-CH • UPD-ORB
Pop-up Drains (w/ Overow):
PUD-BN-O • PUD-CH-O • PUD-ORB-O
Mounng Rings:
MR-001BN • MR-001CH • MR-001ORB
Do these drains have a warranty?
Yes, they all have a Limited
Lifeme Warranty.
Novao I P: 844.404.4242
support@novaoinc.com
NovaoInc.com
More quesons? Feel free
to contact our technical support
team anyme. More info is also
available on our website.
May I use a drain or mounting ring from another vendor?
Yes, drains and mounng rings from other vendors will work with
Novao’s drains and mounng rings. To ensure the nishes match,
we recommend buying both items from the same vendor.
What drain do you recommend for my
vessel sink?
We recommend using pop-up drains with
our glass and porcelain sinks; umbrella
drains with our stone; and strainer drains
with our copper bath sinks. Some of our
porcelain sinks need a drain with overow.
What size hole is needed?
Our pop-up and umbrella drains ideally
need a 1.625 inch counter hole. The grid-
strainers need a 1.5 inch countertop hole.
Do I need a mounting ring?
They are only necessary for our glass
vessel sinks. Our stone, copper and
porcelain sinks do not need one.
  • Page 1 1
  • Page 2 2

Novatto GF-011BN-C-PUD User manual

Novatto
Brand
Novatto
Model
GF-011BN-C-PUD
Type
User manual

Novatto GF-011BN-C-PUD is a vessel sink drain designed for use with glass and porcelain sinks. It features a pop-up design with a brushed nickel finish, and comes with a mounting ring to elevate the sink and provide stabilization. The drain has a 1.625-inch counter hole requirement and includes all necessary components for installation. It is easy to install and use, and its pop-up design allows for easy access to the drain and prevents water from overflowing. With its brushed nickel finish, it adds a touch of elegance to any bathroom or kitchen sink.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents