idh by St. Simons 11010-005 Installation guide

idh

by St. Simons, Inc.

Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories

Demand Quality, Demand idh

idhbrass.com

Installation Instructions

Professional Grade Quality Solid Brass

6” Flush Bolt with Square End

Item# 11010

Dimensions:

 Face: 3/4” x 6”

 Throw: 1”

 Bolt Diameter: 1/2”

 Net Weight: 4 oz. (Part Only)

 Gross Weight: 4.5 oz. (with Strikes and Screws)

 Solid Brass Wood Screws

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Mark the door by laying the polished face plate against

the door.

2. Mortise/cut door the thickness of the face plate.

3. Mortise clearance for the bolt, making sure to leave

solid wood for the mounting screws.

4. Position bolt on door.

5. Drill pilot holes (soap screw threads) and install.

Catalog Section: A

6” Flush Bolt with Square End

Item# 11010

Date: Rev 04/18

This manual is also suitable for

Download PDF