idh by St. Simons 11014-08A Installation guide

idh

by St. Simons, Inc.

Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories

Demand Quality, Demand idh

idhbrass.com

Installation Instructions

Professional Grade Quality Solid Brass

4” Flush Bolt with Square End

Item# 11014

Dimensions:

 Face: 3/4” x 4”

 Throw: 3/4”

 Bolt Diameter: 3/10”

 Net Weight: 2.5 oz. (Part Only)

 Gross Weight: 3 oz. (with Strikes and Screws)

 Solid Brass Wood Screws

 Strike: 5/8” x 1-1/2”

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Mortise the inactive door.

2. Install flush bolt housing in the door edge using provided screws.

3. If using at the top of door: adjust bolt to be flush with the top of

the door when retracted. If using at the bottom of door: adjust bolt

to project when retracted.

4. Install strike.

5. Hang door.

Catalog Section: A

4” Flush Bolt with Square End

Item# 11014

Date: Rev 04/18

This manual is also suitable for

Download PDF