idh by St. Simons 11066-15A Installation guide

idh by St. Simons
Brand
idh by St. Simons
Model
11066-15A
Type
Installation guide

This manual is also suitable for

idh
by St. Simons, Inc.
Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories
Demand Quality, Demand idh©
idhbrass.com
Installation Instructions
Professional Grade Quality Solid Brass
8” Surface Bolt
Item# 11066
Dimensions:
• Length: 8”
• Width: 5/8”
• Throw: 1”
• Projection: 3/4” (Base to top of knob)
• Net Weight: 4.5 oz.
• Gross Weight: 5 oz.
• Solid Brass Wood Screws
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Position in desired position with edge of door.
2. Expose bottom screw hole by sliding bolt to up.
3. Mark position and drill 1/16” pilot hole 3/4” deep and
secure with screw provided.
4. Same process for the top screw hole.
5. Position strike with bolt, trace and mortise 1/8” deep
(Drill 3/4” strike hole about 1” deep is using mortise
strike)
6. Re-align strike and drill 1/16” pilot holes 3/4” deep and
secure with screws provided.
7. Align strike plate; mark position and drill 1/16” pilot
hole 3/4” deep and secure with screws provided.
Catalog Section: B
8” Surface Bolt
Item# 11066
  • Page 1 1

idh by St. Simons 11066-15A Installation guide

idh by St. Simons
Brand
idh by St. Simons
Model
11066-15A
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents