Columbia Radius
1/4” 3 ply shown
Add a new dimension
to your wood projects
with Columbia Radius™
Bending Plywood.
This amazingly flexible board will shape to almost
any curved contour. Its ability to flex in long-grain or
cross-grain directions makes it a versatile panel for
complex designs. On the job site, Columbia Radius can
be covered with a wide range of laminates or paper-
backed veneers for the finished look you need. It’s the
perfect solution for curved columns, arches, cabinetry
and furniture in residential or commercial settings...
anywhere a departure from a straight edge is desired.
CFP079_Radius_Product_Sheet 1 12/30/13 9:36 AM
Specifications
2 ply construction: Rotary peeled tropical
hardwood back. Thin veneer face.
3 ply construction: Rotary peeled tropical
hardwood outer plies. Thin veneer inner
ply. No face or back.
Thickness: 1/8”, 1/4”, 3/8”, 3mm, 5mm,
8mm, 16mm or contact us for other sizes.
Panel size: 4’ x 8’ Long grain or
8’ x 4’ Cross grain.
Minimum radius: 12” may be able to flex
smaller, but will require significant force.
All component parts should be manually
“flexed” to achieve maximum flexibility.
Sanding: Panels may require site sanding.
Applications: Use for curved applications
which will be covered with laminate,
paper-backed veneers or other thick
surfaces. Panels are not designed for
structural or exterior use.
Formaldehyde-free: Made with soy-based
PureBond® technology.
4' x 8' Long Grain Column Bend
GRAIN DIRECTION
4'
8'
2 PLY 4’x8’
3 PLY 4’x8’
3 PLY 8’x4’
2 PLY 8’x4’
p= Core Veneer • o= Thin Veneer
GRAIN DIRECTION
4'
8'
8' x 4' Cross Grain Barrel Bend
(1/4" 3 ply product shown here)
Columbia Radius,
shaping your ideas.
Columbia Radius™ bending plywood is the
versatile panel for many design applications
where straight lines just won’t do.
The amazing flexibility of Columbia Radius
panels makes it a great solution for:
•Rounded furniture designs
•Curved cabinet ends or islands
•Reception and oce work stations
•Arches and arched casings
•Rounded wall units and columns
Due to material availability and mill capability,
Columbia Radius may be oered in slightly
dierent specifications in particular regions.
Please check with your local Columbia
representative to confirm the product
oering in your area.
cfpwood.com
Eastern US
1 800-237-2428
Central US
1 800-760-3341
Northeastern US & Canada
1 888-664-1964 • 1 888-525-1964
Western US / Canada
1 800-547-1791
GVS 5M 1/14
453
For more information on Columbia Radius or other products, please call
one of the regional numbers listed below or visit www.cfpwood.com.
Copyright © Columbia Forest Products. All Rights Reserved.
CFP079_Radius_Product_Sheet 2 12/30/13 9:36 AM
/
