KUZCO EW48212 User manual

Brand: KUZCO

Model: EW48212

Type: User manual

This manual is also suitable for

EW48218

Kuzco Lighting EW48212 is an LED exterior wall sconce designed for outdoor use. It features a sleek and modern design with a pre-wired LED module, eliminating the need for bulb replacement. The fixture is easy to install and can be mounted to an electrical junction box. It also comes with adjustable light angles to direct the light where it is needed. With its weather-resistant construction, the EW48212 is built to withstand harsh outdoor conditions, making it an ideal choice for illuminating patios, decks, and other outdoor spaces.

Kuzco Lighting EW48212 is an LED exterior wall sconce designed for outdoor use. It features a sleek and modern design with a pre-wired LED module, eliminating the need for bulb replacement. The fixture is easy to install and can be mounted to an electrical junction box. It also comes with adjustable light angles to direct the light where it is needed. With its weather-resistant construction, the EW48212 is built to withstand harsh outdoor conditions, making it an ideal choice for illuminating patios, decks, and other outdoor spaces.

1c.

1a. 1d.

1b.

To prevent moisture from entering the outlet box and

causing a short, seal around the top and side perimeter

between the fixture and the wall surface with weather

resistant caulking (illustration 1). The space at bottom

should be left un-caulked to prevent moisture build-up.

Apply a small amount of weather resistant caulking around

the side perimeter between the cap nut and mounting

plate.

Illustration 1.

You have now completed the installation of your fixture,

enjoy.

Caulking

INSTALLATION SHEET

LED Exterior Wall Sconce

START FROM HERE

Please Note:

• All Kuzco LED fixtures come with pre-wired LED module(s).

• Unless instructed to do so, please do not touch any part of the LED module(s) as any

unnecessary contact with the module could cause permanent damage.

• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.

1.

2.

3.

4.

EW48218

Remove the fixture from its original packaging. Remove the

mounting plate (1c) from within the canopy (2a) by unthread-

ing the four screws (1b). Attach the mounting plate (1c) to the

electrical junction box (1a) using the screws (1d) provided in

the hardware package.

Attach the canopy to the mounting plate, which is attached

to the electrical junction box. First connect all wires correctly

G ground to ground, N neutral wire (white to white), L live

wire (black to black) with provided marettes (1b) from the

hardware package. Align the holes on the sides of the

canopy (2a) to the ears of the mounting plate (1c). Once

aligned, Push the canopy to the mounting plate and use the

four screws (2b) to secure the canopy.

2a.

2b.

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20181127

• Make sure POWER is COMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

1

KUZCO EW48212 User manual

Brand: KUZCO

Model: EW48212

Type: User manual

This manual is also suitable for

EW48218

Kuzco Lighting EW48212 is an LED exterior wall sconce designed for outdoor use. It features a sleek and modern design with a pre-wired LED module, eliminating the need for bulb replacement. The fixture is easy to install and can be mounted to an electrical junction box. It also comes with adjustable light angles to direct the light where it is needed. With its weather-resistant construction, the EW48212 is built to withstand harsh outdoor conditions, making it an ideal choice for illuminating patios, decks, and other outdoor spaces.

Download PDF

Related papers

Other documents