VISUAL COMFORT JN 5112 User manual

Brand: VISUAL COMFORT

Model: JN 5112

Type: User manual

VISUAL COMFORT JN 5112 is a large chandelier that combines modern design with classic elegance. It features a metal frame with a tiered design and eight layers of glass balls. The chandelier is adjustable in height and can be customized with different sizes of glass balls to create a unique look. The chandelier is easy to install and comes with all the necessary hardware. It is perfect for use in dining rooms, living rooms, and other large spaces.

Talia Large Chandelier

Item #JN 5112

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

Bulbs not included

Diagram 1

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove collar loop (B) from chain (F) by unscrewing quick link (I).

3. Install mounting plate (A) to junction box and secure with mounting

screws (C).

4. Secure collar loop (B) to mounting plate (A) using pliers to tighten

locknut.

5. Install canopy (D) to collar loop (B) and secure with collar ring (E).

6. Determine desired overall length, and amount of chain (F) needed.

Shorten chain using chain pliers. (Keep extra chain)

7. Attach chain (F) to collar loop (B) and fixture loop (G) using quick

links (I). Secure quick links (I).

8.. Thread fixture wire and ground wire through chain (J) and chain (F).

NOTE: When you reach the collar loop (B), ensure there is no tension

on the wires. Cut excess wires, being sure to leave about 12” to reach

the junction box.

9. Separate two sides of molded wire, and strip insulation on each 5/8".

10. Loosen collar ring (E) and let canopy (D) slip down chain (F) carefully.

11. Twist all fixture wires together. Slip through center hole of collar

loop (B).

NOTE: Untwist wires and separate to prepare for connection.

TOOLS REQUIRED (NOT INCLUDED):

Phillips Screwdriver Slotted Screwdriver Chain Pliers

Slip Joint Pliers Measuring Tape Wire Cutters

Wire Strippers

Talia Large Chandelier

Item #JN 5112

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

Bulbs not included

Diagram 1

12. Wrap fixture ground wire (bare copper) around the green grounding

screw (see diagram 1). Tighten. Continue fixture ground wire and

connect to supply ground wire (usually green or bare copper) using

wire nut (H).

NOTE: It is imperative that the fixture is grounded.

13. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually

white) using wire nut (H).

14. Connect fixture hot wire (smooth with markings) to the supply hot

wire (usually black) using wire nut (H).

CAUTION: Do not reverse the hot and neutral connections.

15. Make sure all wire connections are tight, then carefully tuck into the

junction box.

16. Install canopy (D) to collar loop (B) and secure with collar ring (E).

17. Insert light bulbs into the sockets.

18. Attach chains (J) to hooks on fixture body (K) using quick links (I).

Secure quick links (I).

19. Install glass balls starting from bottom (layer 1 and working your

way to the top (layer 8) as shown in figures L1-L8.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents..

110mm

137mm

163mm

S (13pcs + 2pcs spare parts)

M (30pcs + 2pcs spare parts)

L (25pcs + 2pcs spare parts)

Talia Large Chandelier

Item #JN 5112

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

L3 L4

Talia Large Chandelier

Item #JN 5112

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

Talia Large Chandelier

Item #JN 5112

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

VISUAL COMFORT JN 5112 User manual

VISUAL COMFORT JN 5112 User manual

VISUAL COMFORT JN 5112 User manual

Related papers

Other documents