Hagerman Valve 12AU7 Operating instructions

Type
Operating instructions

Hagerman Valve 12AU7: Warm up your tone with this all-tube boost pedal, featuring true bypass, 20dB of gain, and a bandwidth of 25Hz to 4kHz. Experience the gooey non-linear tube goodness that breathes life into your sound, making it the perfect always-on pedal for both guitar and bass.

Hagerman Valve 12AU7: Warm up your tone with this all-tube boost pedal, featuring true bypass, 20dB of gain, and a bandwidth of 25Hz to 4kHz. Experience the gooey non-linear tube goodness that breathes life into your sound, making it the perfect always-on pedal for both guitar and bass.

VALVE
12AU7 Boost Pedal
Made in USA
VALVE – 12AU7 Boost Pedal
2
Copyrights & Trademarks
Copyright Hagerman Amplification 2021. All rights reserved. No part of this document
may be photocopied, reproduced, or translated to another language without prior
written consent.
Disclaimer
The information contained in this document is subject to change without notice.
Hagerman Amplification shall not be liable for errors contained herein or for
consequential damages in connection with the furnishing, performance, or use of this
material.
Warranty
Hagerman Amplification warrants this product free of defects in materials and
workmanship for a period of 10 years (90 days tubes and footswitch). If you discover a
defect, Hagerman Amplification will, at its option, repair or replace the product at no
charge to you provided you return it during the warranty period, transportation charges
prepaid to Hagerman Amplification. This warranty does not apply if the product has
been damaged by negligence, accident, abuse or misuse or misapplication, has been
damaged because it has been improperly connected to other equipment or has been
modified without the express written permission of Hagerman Amplification. This
warranty is limited to the replacement or repair of this product and not to damage to
equipment of other manufacturers. Any applicable implied warranties, including
warranty of merchantability, are limited in duration to a period of the express warranty
as provided herein beginning with the original date of purchase and no warranties,
whether express or implied shall apply to the product thereafter. Under no
circumstances shall Hagerman Amplification be liable for any loss, direct, indirect,
incidental, special, or consequential damage arising out of or in connection with the use
of this product.
Hagerman Amplification
1521 Alexander St Apt 1701
Honolulu, HI 96832
808-383-2704
www.hagamps.com
VALVE – 12AU7 Boost Pedal
3
Description
VALVE is an all-tube boost pedal (no silicon involved) operating in starved-plate and
starved-heater mode, which is difficult to pull off. Most attempts (Matsumi) fail due to
excess grid current at such low bias. This new design solves those issues, breathing life
into the tube, achieving full bandwidth and performance, all while maintaining that
gooey non-linear tube goodness. This pedal will warm up your tone like nothing else.
Destined to be your always-on pedal. Works great on bass too!
Specifications
Item Specification
Bypass True
Gain 20dB
Bandwidth 25Hz to 4kHz
Controls Level
Tube 12AU7
Input Impedance 100k
Size 5.4” x 2.4” x 2.1”
Power 9V @ 135mA
V1A
12AU7
R1
100k
R2
10k
C7
100uF
R3
100k
V1B
12AU7
R5
10k
R6
100kC3
100nF
C2
10uF
C5
100nF
H1
J1
J3
J2
C1
100nF
C6
100uF
R8
10k
C4
10uF
R4
100k
R7
100k
C8
1nF
R9
470k
GAIN
9V
+20dB
135mA
COPYRIGHT 2021 HAGAMPS.COM
25Hz-4kHz
250mA INRUSH CURRENT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Hagerman Valve 12AU7 Operating instructions

Type
Operating instructions

Hagerman Valve 12AU7: Warm up your tone with this all-tube boost pedal, featuring true bypass, 20dB of gain, and a bandwidth of 25Hz to 4kHz. Experience the gooey non-linear tube goodness that breathes life into your sound, making it the perfect always-on pedal for both guitar and bass.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI