Hagerman REPLICATE User manual

Brand: Hagerman

Model: REPLICATE

Type: User manual

Hagerman REPLICATE is a ground loop eliminator pedal designed to connect your guitar or pedals to multiple amplifiers simultaneously without the worry of unwanted hum or buzz. Each of the three isolated outputs provides a clean signal, free from ground loops. Its exceptional bandwidth allows for use with bass and synthesizers, while the low output impedance ensures signal integrity even over long cable runs.

REPLICATE

Ground Loop Eliminator Pedal

Made in USA

REPLICATE – Ground Loop Eliminator Pedal

Copyrights & Trademarks

may be photocopied, reproduced, or translated to another language without prior

written consent.

Disclaimer

The information contained in this document is subject to change without notice.

Hagerman Amplification shall not be liable for errors contained herein or for

consequential damages in connection with the furnishing, performance, or use of this

material.

Warranty

Hagerman Amplification warrants this product free of defects in materials and

workmanship for a period of 5 years (90 days tubes and footswitch). If you discover a

defect, Hagerman Amplification will, at its option, repair or replace the product at no

charge to you provided you return it during the warranty period, transportation charges

prepaid to Hagerman Amplification. This warranty does not apply if the product has

been damaged by negligence, accident, abuse or misuse or misapplication, has been

damaged because it has been improperly connected to other equipment or has been

modified without the express written permission of Hagerman Amplification. This

warranty is limited to the replacement or repair of this product and not to damage to

equipment of other manufacturers. Any applicable implied warranties, including

warranty of merchantability, are limited in duration to a period of the express warranty

as provided herein beginning with the original date of purchase and no warranties,

whether express or implied shall apply to the product thereafter. Under no

circumstances shall Hagerman Amplification be liable for any loss, direct, indirect,

incidental, special, or consequential damage arising out of or in connection with the use

of this product.

Hagerman Amplification

1521 Alexander St

Honolulu, HI 96822

808-383-2704

www.hagamps.com

REPLICATE – Ground Loop Eliminator Pedal

Description

The REPLICATE pedal is designed to drive two or three amplifiers at the same time from

a single guitar or pedal chain.

The main output is a direct connection to input, thereby providing the load seen by

guitar. Copied outputs are each independently isolated from ground in order to prevent

ground loops, which typically end up injecting hum or buzz into the signal path. Internal

opto-isolators eliminate such undesirable noises.

Bandwidth is exceptional, operating all the way down to 10Hz, making the pedal useful

for bass and synthesizer as well. Output impedance is superbly low, capable of driving

long lines without treble loss.

Earth ground for guitar and pedals provided by Main Amplifier, as shown.

REPLICATE – Ground Loop Eliminator Pedal

Specifications

Item Specification

Gain 0dB

Input Impedance 100kohms

Bandwidth 10Hz to 10kHz

Maximum Signal 1.5Vrms

Distortion 1.7%

Size 4.4” x 2.4” x 1.2”

Input Power 9V to 12V @ 15mA

100nF

VDC

2N3906

10k

220k

10nF

100pF

470k

100nF

U1B

LTV817A

R12

100uF

U1A

LTV817

P+

P-

R18

470k

R13

100

R14

470k

2N3904

U2A

LTV817

LED

R11

10k

100

10nF

100nF

U2B

LTV817A

R15

N+

N-

R19

470k

R16

100

R17

470k

0dB

1.5V

10Hz - 10kHz

1.7% @ 500mV

OUT

SENS

2 5

ENAB

TRIG BIAS

7CLMP

LM555

R21

R20

10k

C11

1nF

C14

100nF

100uF

MUR140

1:1

C10

100nF

R22

100

VDC

C16

100uF

BAT42

R26

100

P+

P-

R24

100

C12

1nF

C15

100nF

1:1

R23

100

C17

100uF

BAT42

R27

100

N+

N-

R25

100

C13

1nF

VDC

Hagerman REPLICATE User manual

Hagerman REPLICATE User manual

Hagerman REPLICATE User manual

Related papers

Other documents