2. Cal-Royal
  3. CAL-ROYAL DS-413 Door Shoes

Cal-Royal CAL-ROYAL DS-413 Door Shoes, DS-413 Door Shoes Installation guide

  • I've reviewed the product details for CAL-ROYAL door shoes, specifically the DS-413 and DS-414 models. This document includes installation guidelines, key features, and the tools required. I am ready to assist you with any questions you may have about these door shoes.
  • What is the length of the DS-413 door shoe?
    What material is the seal insert made of?
    What type of screws are included for installation?
    What is the difference between DS-413 and DS-414?
Weather Seal Door Accessories
ITEM/FINISH:
Important Reminder: Always use appropriate
Personal Protective Equipment (PPE) during installation.
DS-413 Door Shoes
DS-413
Door Shoes
DS-413
(with Notched
Fins)
DS-414
(without
Notched Fins)
- Power tool drill
- Marker
- Measuring tape
- Screw driver
- Cutting tools
(Miter saw, circular
saw, hacksaw, and
plier)
Tools Required:
Rubber Seal (VINYL)
DOOR
Retainer (CASING)
1. Remove the door if necessary to prepare the bottom of the door
prior to installation of door shoe.
2. Measure, mark, and trim door shoe exact to the full width of the door.
Trim seal 1/16” longer than trimmed door shoe on each end. Crimp
ends to secure insert.
3. Drill pilot holes in header stop for the screw at marks.
4. Slide door shoe in place and insert screws.
Adjust to ensure light even contact with threshold.
Fasten the screws.
Installation Guidelines:
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. | Website: www.cal-royal.com | Email: [email protected]
Phone: (323) 888-6601 ; (800) 876-9258 | Fax: (323) 888-6699 ; (800) 222-3316
DS-413
LENGTH: 36”
VINYL SEAL INSERT
MILL FINISH ALUMINUM
Packaging includes:
- Screws for
Wood doors - # 6 x 5/8"
Metal doors - # 6 x 5/8"
20
/