Sound Performance Lab 2047, Area 5.1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Sound Performance Lab 2047 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Area 5.1
The Area 5.1 is a 5.1 surround
microphone preamplifier featu-
ring five matched high precision
gain stage preamplifiers with
motorized master/slave mic gain
controls, a Sub/LFE stage to deter-
mine the composition of the sub
signal and stereo downmix stages
for each channel. A monitor stage
allows on-location monitoring
with stereo headphones.
The complete Area 5.1 system
contains the Area 5.1 unit and the
both optionally available SPL MA 5
mic array and multicore lead.
Though the Area 5.1 preamplifier
could be used with any micropho-
ne setup, the combination with
the MA 5 is recommended . This
setup has proven in various live
and studio situations to be per-
fect in capturing the 5.1 sound
image of a preferred listeners
position“, while its versatility is
exceeded only by its ease of use.
Generally any digital or analog
recording system can be connec-
ted to the analog 1/4" unbalanced
jack or balanced XLR outputs of
the Area 5.1.
If for example, an eight-track
DTRS is employed, the first five
tracks can be used for the L, C, R,
SL and SR channels, the sub bass
signal should be routed to the
6th track while track 7 and 8 can
be used to record the stereo mix-
down.
Features
Matched audiophile preampli-
fiers (pad, phase reverse, 48 V
power supply, Lundahl input
transformers)
High precision motorized ma-
ster/slave mic gain controls
Stereo downmix stages for 5.1
and stereo recordings in parallel
Suited for any microphone type
(matched mics recommended)
First discrete 5.1 system for
motion recordings with optio-
nal SPL MA 5 mic array.
Specifications
Frequency Response:.............. 10 Hz-50 kHz
Common Mode Rejection:...... 10 kHz:>- 60dB
THD & N
Amplification: A weighted:
20dB -97.1 dBu
40dB -91.1 dBu
65dB -71.0 dBu
Dynamic Response:................ 119 dB
Max.Output Level XLR / Jack: +20 dBu
Output Impedance: ............... <75 Ohm
Housing: ............................... Standard EIA 19"/3U
482 x 132 x 237 mm
Weight: ................................. 7.3 kg
Area 5.1 Model 2047
Sound Performance Lab · Sohlweg 55 · D-41372 Niederkrüchten · Tel.+49 (0) 21 63 9834-0,Fax -20 · E-Mail:info@soundperformancelab.com · Internet: www.soundperformancelab.com
© 2000 SPL electronics GmbH. All rights reserved. Subject to change without notice.
Area 5.1 Rear Front
/