aspenhome I256-3064 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I256-3064
Type
Assembly Instructions
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/3
ITEM NO: I256-3064 66" Writing Desk
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
Adjust the leveler
when necessary
Leveler on Legs
COMPONENTS LIST:
No. Description Sketch Quantity
1 Desk Top 1 PC
2 Leg 4 PCS
PVC-lined Top Drawers
04-26-2022
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø1/4" x 1" 8 PCS
B Lock Washer Ø1/4"
C Flat Washer Ø1/4" x 3/4"
D Allen Wrench 4mm 1 PC
12 PCS
E
F
G
Bolt Ø1/4" x 2" 4 PCS
12 PCS
Knob
Screw Ø5/32" x 1-1/4" 1 PC
1 PC
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/3
ITEM NO: I256-3064 66" Writing Desk
STEP 1:Remove the side drawers from the desk top: Fully extend the drawer, then press the
plastic tab down on the right and up on the left at the same time as shown below. While holding
the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 4: Replace all of the side drawers in desk top:
Fully extend the slides from the case. Then align the
slides on the drawer to the slides on the case as
shown. Push the drawer back in. You may have to
slide the drawer in and out several times in order to
properly align the ball bearings.
STEP 2: Put the desk top upside down on a soft surface.
STEP 3: Attach the legs to the desk top by using 8 bolts (A), 4 bolts (B), 12 lock washers (C) and
12 flat washers (D). Use the allen wrench (E) to completely tighten all the bolts. Return the desk
top to the upright position.
A
C
D
E
Leg
Leg
Desk Top
Leg
Leg
CD
EB
04-26-2022
Hook latch
Metal plate Press here to release
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 3/3
Knob
Screw
Knob
ITEM NO: I256-3064 66" Writing Desk
Note: Please refer with the modular assembly instructions to keep the knob inside either the
left or right drawer when this desk is combined with the modular keyboard tray (I256-3030).
STEP 5-1: Reverse each knob on side drawers by removing the screws while each drawer is
open and attach all knobs to the front of the side drawers with the screws as shown below.
STEP 5-2: Install the knob (F) to the keyboard drawer front with the screw (G) as shown below.
Screw (G)
Knob (F)
04-26-2022
  • Page 1 1
  • Page 2 2
  • Page 3 3

aspenhome I256-3064 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I256-3064
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents