2. morse
  3. 4560SS-P

morse 4560SS-P Operators Manual and Parts Diagram

  • Hello! I've reviewed the Operator's Manual for the Morse Rim Clamp Assembly Kit 4560SS-P. This document provides detailed instructions on how to install and operate the stainless steel rim clamp, including how to secure and release drums for lifting and tilting. I'm ready to answer your questions about its features and usage based on this manual.
  • How do you install the rim clamp assembly on MORCINCH drum holder?
    How do you install the rim clamp assembly on the drum holder with a socket tube?
    How to secure the drum?
    How to release the drum?
The Specialist In Drum Handling Equipment
Kit # 4560SS-P
Kit, Rim Clamp Assembly, Stainless Steel
Copyright 2019 - Morse Mfg. Co., Inc. Form PL4560SS-P (0516-____) (Updated 17 Mar, 2021) 1
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
INSTALLATION INSTRUCTIONS
for MORCINCHTM Drum Holder
Position Rim Clamp Assembly (item 1) on drum holder bracket 1.
with holes aligned.
Bolt in place using 2 bolts (item 5) and 2 nuts (item 4).2.
ITEM QTY PART # DESCRIPTION
1 1 5806SS-P WELD, RIM CLAMP SS
2 1 3616-P HANDWHEEL ASM, 4”, 3540-P 185R
3 1 3510SS-P THREADED BARREL, RIM CLAMP, SS
4 2 3981SS-P NUT, 3/8-16 NYLON LOCK, SS
5 2 82SS-P HHCS, 3/8-16 X 2-1/4, SS
6 1 1315SS-P HHCS, 3/8-16 X 2-3/4 SS
INSTALLATION INSTRUCTIONS
for Drum Holder with Socket Tube
Slide Rim Clamp Assembly (item 1) down through socket 1.
tube, and line up top holes in Rim Clamp Assembly with top
holes of socket tube.
Use bolt (item 6) and nut (item 4) to bolt in place through the 2.
top holes of the socket tube and the Rim Clamp Assembly.
CONTENTS
Page
Parts List and Diagram. . . . . . . . . . . . . . . . . . . 1
Installation Instructions. . . . . . . . . . . . . . . . . . . . 1
Operating Instructions. . . . . . . . . . . . . . . . . . . . 2
Operator’s Manual
for Morse
Stainless Steel Rim Clamp Assembly Kit
Kit # 4560SS-P
Serial number 0516 to ____ (MMYY)
The Specialist In Drum Handling Equipment
Kit # 4560SS-P
Kit, Rim Clamp Assembly, Stainless Steel
Copyright 2019 - Morse Mfg. Co., Inc. Form PL4560SS-P (0516-____) (Updated 17 Mar, 2021) 2
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
OPERATING INSTRUCTIONS
TO SECURE DRUM:
Turn hand wheel (item 2) counter clockwise to open top jaw. 1.
Position drum holder assembly with bottom jaw of rim clamp 2.
directly under top rim of drum.
Turn hand wheel clockwise until top jaw is pressing tightly 3.
against top of drum (see Figure 1).
Secure drum with chain and ratchet mechanism. Drum is 4.
now ready to be lifted and tilted.
TO RELEASE DRUM:
Lower drum to oor in an upright position. 1.
Release chain from ratchet mechanism by applying 2.
pressure to ratchet handle in a clockwise direction with one
hand and opening pawl to free ratchet with other hand.
Remove chain link from ratchet.
Open rim clamp by turning hand wheel counter clockwise.3. Figure 1
Plastic drum being lifted with
Rim Clamp Assembly Kit
installed.
WARNING: This product can expose you to chemicals including cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is
known to the State of California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Operator’s Manual for Morse Stainless Steel Rim Clamp Assembly Kit
Kit # 4560SS-P
Serial Number 0516 to ____ (MMYY)
/