morse 36-SS, 36, 40, 40-30 User manual

I've reviewed the CE Declaration of Conformity for the 40 Series Drum Cradles. This document confirms that the product meets the Machinery Directive and Safety of Machinery standards. I'm here to answer any questions you might have about this device conformity.
What is the product covered by this declaration?

What is the model covered by this declaration?

Which standard does this product comply with?

The Specialist In Drum Handling Equipment

CE Declaration of Conformity

40 Series Drum Cradles

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CE Declaration of Conformity

This product has been tested to the current appropriate standards

and is in compliance with the following

-------------------------------------------------------------------

Machinery Directive: 2006/42/EC

Standard: EN 60204 Safety of Machinery

-------------------------------------------------------------------

Manufacturer’s Name: MORSE Mfg. Co., Inc.

Manufacturer’s Address: 103 Kuhn Rd.

Syracuse, NY 13208

Product: Drum Cradles

Model: 40 Series

Serial Number: 400000 and up

-------------------------------------------------------------------

This Certicate of Compliance issued 2022 is valid for the test sample of the product specied

above and that it conforms to the Directive(s) and Standard(s).

Signature:

Nathan Andrews

President

Morse Manufacturing Company, Inc.

103 Kuhn Rd.

Syracuse, New York, USA 13208

Phone: (315)-437-8475

Fax: (315)-437-1029