2. Kampmann
  3. ProtecTor, electromechanical control version

Kampmann ProtecTor, electromechanical control version Installation Plan

  • Hello! I've reviewed the installation guide for the KAMPMANN Cabling Protector. This document provides detailed wiring diagrams for the ProtecTor system, including connections for the industrial thermostat, door contact switch, and external fault signal evaluation, along with speed controller type 30510. I am ready to assist you with any questions regarding the components described within this manual.
  • What type of speed controller is used for activation?
    What is the voltage and frequency for the industrial thermostat?
    What is the maximum current for the external evaluation of the fault signal?
ProtecTor
8.3.3 Cabling ProtecTor (**00), activation via speed controller type 30510
Mains power 230VAC
fuse by others
max. 16 A
Mains power
230VAC
fuse by others
max. 16 A
Mains power
3 x 400VAC
fuse by others
max. 16 A
Mains power
3 x 400VAC
fuse by others
max. 16 A
Continuously variable speed
controller
0 – 10 VDC / 5 mA 230 V / 50 Hz
Type 30510
In situ
terminal box
In situ
terminal box
Industrial thermostat
Type 30058/59
230 V / 50 Hz
Door contact switch
Type 30763
230 V / 50 Hz
External evaluation
of fault signal
230 VAC / 50 Hz
max. 2 A
ProtecTor without repair switch
Unit 1
3 x 400 VAC / 50 Hz
0-10 VDC
250 VAC/
2 A
250 VAC/
2 A
ProtecTor without repair switch
Unit 2
3 x 400 VAC / 50 Hz
0-10 VDC
8.3.4 Cabling ProtecTor (**00), activation via speed controller type 30510
Mains power 230VAC,
fuse by others
max. 16 APE
Mains power
230 VAC
fuse by others
max. 16 A
Mains power
3 x 400 VAC
fuse by others
max. 16 A
Mains power
3 x 400VAC
fuse by others
max. 16 A
Continuously variable
speed controller
0 – 10 VDC / 5 mA 230 V / 50 Hz
Type 30510
In situ
terminal box
In situ
terminal box
Industrial thermostat
Type 30058/59
230 V / 50 Hz
Door contact switch
Type 30763
230 V / 50 Hz
External evaluation
of fault signal
230 VAC /50 Hz
max. 2 A
ProtecTor with repair switch
Unit 1
3 x 400 VAC / 50 Hz
0-10 VDC
250 VAC/
2 A
250 VAC/
2 A
ProtecTor with repair switch
Unit 2
3 x 400 VAC / 50 Hz
0-10 VDC
ProtecTor ProtecTor
/