2. WarmlyYours
  3. EnergyStat™

WarmlyYours EnergyStat™ Product information

  • Hello! I've reviewed the wiring diagram for the WarmlyYours OJ-DUAL system, which includes details on how to connect the 120V/240V TEMPZONE with the ENERGYSTAT thermostat. The diagram covers aspects like grounding, conduit sizes and connection of heating mat. I'm ready to answer any questions you may have about this document and the installation process.
  • What is the item number for this wiring diagram?
    What is the recommended conduit size if only one roll/mat is used?
    What is the recommended conduit size if 2 or 3 rolls/mats are used?
BRAIDED GROUND SHIELD
TEFLON INSULATION
STRANDED CONDUCTOR CORE
TEFLON INSULATION
FOR ELECTRICIAN
MOUNTING HARDWARE
4" x 4" DEEP SQUARE BOX
SUPPLIED BY CONTRACTOR
SINGLE GANG MUD RING (PLASTER
RING) SUPPLIED BY CONTRACTOR
ENERGYSTAT™
ELECTRICAL ROUGH-IN
THERMOSTAT SENSOR
(LOW VOLTAGE)
CONDUCTOR FROM
END LEAD OF MAT
NEUTRAL
(L2)
GROUND
THERMOSTAT
FROM POWER SOURCE
6/17/99
- 1/2" CONDUIT IF ONLY
ONE ROLL/MAT IS USED
- 3/4" CONDUIT IF 2 OR 3
ROLLS/MATS ARE USED
1/2" CONDUIT
FOR FLOOR
SENSOR
CONDUIT TO
POWER SOURCE
HEATING MAT
4" x 4" DEEP SQUARE BOX
WITH SINGLE GANG MUD
RING FOR CONNECTION
TO THERMOSTAT
ENSURE THE SYSTEM IS GROUNDED
WIRING DIAGRAM
120V and 240V TEMPZONE WITH ENERGYSTAT™
ITEM#: OJ-DUAL
HOT
(L1)
GROUND THE SYSTEM
CONDUCTOR FROM
START LEAD OF MAT
24/7 Installation Support • Lifetime Technical Assistance • Free Design Service • www.WarmlyYours.com • (800) 875-5285
30054-A 04/08
/