MicroNet SP5711HD Quick Installation Guide

Category
Video servers/encoders
Type
Quick Installation Guide

This manual is also suitable for

MicroNet SP5711HDA is a H.264/MPEG-4/MJPEG dual streaming transition device from CCTV analog camera to IP based solution. It connects the analog camera, digitizes and packetizes the image/video, allowing the CCTV analog cameras to enjoy the benefits of the IP surveillance. Feature-rich, it offers PTZ control, 2-way Audio, Digital I/O, and a USB port for external Wifi adapter. SP5711HDA provides superior-quality image, flexibility and Scalability for IP network surveillance solution.

MicroNet SP5711HDA is a H.264/MPEG-4/MJPEG dual streaming transition device from CCTV analog camera to IP based solution. It connects the analog camera, digitizes and packetizes the image/video, allowing the CCTV analog cameras to enjoy the benefits of the IP surveillance. Feature-rich, it offers PTZ control, 2-way Audio, Digital I/O, and a USB port for external Wifi adapter. SP5711HDA provides superior-quality image, flexibility and Scalability for IP network surveillance solution.

5
6
Web Configuration
1. Open the Web browser on your computer (for example,
Microsoft Internet Explorer in this guide)
2. Type the default IP address (192.168.1.2) or the IP address
found by IP Finder in the Address bar, and then press
[Enter].
3. When the login window appears, enter the default User
name (root) and password (pass) and press OK to access
to the main screen of the camera's Web Configuration.
1.
1.
1.
1.
1.
4. Click Setup bottom on the top right corner and then the
configuration page will be shown for your further setup.
Note: For more information, please refer to the manual on the
provided CD.
For details of operating Ultra View, please refer to the
Software Manual on the provided Installation CD.
If you have any problem on the product(s), please contact
your local authorized dealer.
4.
7
Accessing the Camera
Using IP Finder
1. Insert the Installation CD into your computer's CD-
ROM drive, and find the IP Scan fold.
2. Click the IP Scan item to launch the utility, and the control
panel will appear as below.
3. Click on Scan to show IP address of the camera.
4. Once get the IP address, and then launch the Web browser
to access your camera.
1.
1.
4.
Communicate via
Quick Installation Guide
Model No.: SP5711HDA
www.micronet.com.tw
H.264 Video Server
P/N: 2300-0721
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
Introduction
The Micronet Video Server is a H.264/MPEG-4/MJPEG dual
streaming transition device from CCTV analog camera to IP
based solution. The powerful complete features including PTZ
control, 2-way Audio, Digital I/O, USB port for external Wifi
adapter provide the superior-quality image, flexibility and
Scalability for IP network surveillance solution.
The SP5711HDA connects the analog camera, digitizes and
packetizes the image/video, allowing the CCTV analog cameras
to enjoy the benefits of the IP surveillance.
Package Contents
Before you start installing the device, verify the following items
are in the package:
Video Server
Quick Installation Guide
Manual/Software CD
DC Power Adapter
Mini DIN Cable
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g .
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista
CPU: Pentium 4, 2.4GHz or Above
RAM: 512MB
Resolution: SVGA or XGA with 1024 x 768 Resolution
System: DirectX 9.0C or Above
User Interface: Microsoft® Internet Explorer 6.0 or above
Connecting the Video Server to LAN
Use the Ethernet cable to connect the Video Server to your
local area network (LAN).
When you connect the AC power adapter, the Video Server is
powered on automatically. You can verify the power status from
the Power LED on the back panel of the Video Server.
Once connected, the Link LED stops flashing but shines red
light and the camera is on standby and ready for use now.
1
3
4
2
SP5711HDA
Connecting the Camera to Video Server
Connect a standard BNC video cable to BNC connector on
Video Server and connect another end to analog camera. Video
Server will receive video input signal for streaming encoding.
Connecting the analog camera
SP5711HDA
Connecting the Ethernet Cable
  • Page 1 1
  • Page 2 2

MicroNet SP5711HD Quick Installation Guide

Category
Video servers/encoders
Type
Quick Installation Guide
This manual is also suitable for

MicroNet SP5711HDA is a H.264/MPEG-4/MJPEG dual streaming transition device from CCTV analog camera to IP based solution. It connects the analog camera, digitizes and packetizes the image/video, allowing the CCTV analog cameras to enjoy the benefits of the IP surveillance. Feature-rich, it offers PTZ control, 2-way Audio, Digital I/O, and a USB port for external Wifi adapter. SP5711HDA provides superior-quality image, flexibility and Scalability for IP network surveillance solution.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI