1.Primarystation.
2.Raymichandsetextensioncable(A80290,A80291orA80292)
3.Raymichandsetsecondstation(A80289)
4.Panelmountfixingskit(R70438)
5.RaymichandsetadaptorcablewithRCAaudio(A80297)
6.Primarystationpassivespeaker
7.Secondstationpassivespeaker
Note:AstheFistmicdoesnotincludeadisplayitcannotbe
usedtocreateasecondfunctionalstation.
Alarmbehaviorforsecondstationpassivespeakers(appliesto
Ray60/70only)
TheA80297adaptorcablecanbeusedtoconnectanadditional
passivespeakertothesecondhandsetstation.Apassivespeaker
connectedtothesecondstationofaRay60orRay70Radiowill
onlyreceivevoiceaudio.AlarmswillNOTbeheardfromthe
passivespeakerwhenitisconnectedtothesecondstationofa
Ray60orRay70Radio.
Ray90-Ray91
Handsetstationconnection
AWiredhandsetcanbeconnectedtoeachHandsetstation
connection(HS1/HS2).Y ourradioissuppliedwiththeequipment
tocreateafullhandsetstation(i.e.:Wiredhandset,Adaptorcable
andPassivespeaker).Additionalaccessoriescanbepurchased
tocreateasecondwiredhandsetstation.
1.Basestation
2.Passivespeaker(1xsuppliedandavailableasaccessory:
A80542)
3.Wiredhandset(1xsuppliedandavailableasaccessory:
A80289)
4.HandsetstationadaptorcablewithRCAAudio400mm(1.3ft)
(1xsuppliedandavailableasaccessory:A80297)
5.Wiredhandsetextensioncable(Availableoptional
accessories:A80290–5m,A80291–10mor15–A80292)
6.Panelmountfixingskit(1xsuppliedandavailableasaSpare:
R70438)
Connectinghandsetsandcables
Followthestepsbelowtoconnecthandsetsandextensioncables
together.
1.Iffitted,unscrewandremovethedustcapfromtherelevant
connector.
2.Ensurethecableconnectorsarecorrectlyorientated,before
insertion.
3.Ensureconnectorsarefullyinserted,beforelocking..
4.TightenlockingcollarsbyRotatingclockwise.
Handsetextensioncables
Handsetstationcablingcanbeextendedusingapproved
extensioncables.
ThemaximumlengthofcablefromtheHandsettotheBasestation
shouldnotexceed50m(164ft)
Handset(wired)mountingusingthe
holster
Beforemounting,ensurethatyourselectedlocationmeetsthe
locationrequirementsfoundinthisdocument.
1.Checktheselectedlocationforthemountingholster,aclear
flatareaisrequired,withsufficientspacearoundittoplace
andremovetheHandset.
2.Usingapencil,offeruptheholstertothedesiredlocationand
markthelocationofthescrewholesonthemountingsurface.
3.Drillthemountingholesusingasuitablesizedrillbit.
4.Holdtheholsterinplaceandsecureusingthescrewsprovided.
5.PlacetheHandsetintotheholsteruntilitclicksintoposition.
Pass-throughpanelkitmounting
Wheninstallinghandsets,thepass-throughpanelkitshouldbe
usedtosecurethecabletoanypanelsthecablehastopass
through.
Raymicwiredhandsetinstallationinstructions
3