Sricam SP009C Quick User Manual

MiNi IP Camera

Quick User Manual

For Videos of how to setup IP Cameras please visit Website: www.sricam.com/videos

Customer Service

Monday - Saturday

9:00-18:00 Beijing Time (UTC +8)

E-Mail: [email protected]

Skype ID: tech.sricam

Website: www.sricam.com

IR Sensor

Lens

Speaker

Microphone

Reset

MicroSD card Slot

DC 5V Power Slot

Reset

Products Introduction

Before starting setup

Make sure of the following:

• Your router supports the 2.4GHz frequency band (802.11b/g/n).

• Your router DHCP is enabled.

• Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connect with.

• You know the WLAN/Wi-Fi password.( No special characters in the password and Wi-Fi SSID

such as @#$%^&*).

• Your smartphone, camera, and router should be within about 8 feet during setup. After your camera

is set up,you can move the camera to your preferred location.

Note: For watch live video on App without internet, please go to page 7: FAQ2.

SP009C

SP020

EN

1

Sricam App Installation

Start setup

Step1.

Go directly to Step3 if the Sricam App is already download and registered in your smartphone.

Scan the QR code to download the“Sricam” App.

Search“Sricam”on Google Play or iOS App Store.

2-1 2-2 2-3

After download the App “Sricam”, please Install and register a user account.

0551876

Input a email

Keep password

Please creat a password

for App account please don't

input your email password

Forgot Password?

Step2. Register an App user account

2

Step3. Product Connection

If you can’t hear the beeping sound from the device within 1 minute, you need reset the

device first. Press RESET button by a reset pin for 10 seconds until you hear a

clash sound from the device. Then waiting until you hear continuous beeping sound from

the device, and go to Step4 for add the device on App “Sricam”.

Waiting

on App “Sricam”.

.

Step4. Add the camera on App

4-1 4-2 4-3

Add deviceAdd deviceDevice List

Note: The “Device ID” can

be found on the label which is

attached to the camera.

Note: Here take camera

ID:404087 as an example.

Add new device

IPCam

Input password(default:888888)

beeping sound

device

camera.

3

4-4 4-5 4-6

4-7 4-8 4-9

WLAN

MEYE_404087

Turn on or turn off

Wi-Fi Setting

Setting Wi-Fi

NO SIM

100%

MEYE_898888

MEYE_1022222

TP-LINK

i

Connect

Sricamsales

Secured

Loading

Wi-Fi Setting

Wi-Fi setting succeed

Skip

Change Password

Note: Password should be

3-9 characters long (A-Z,0-9)

without special characters.

Configuring Wi-Fi ..., please

wait for couple of minutes

NoteAfter your smart

phone is connected to the AP

Hotspotback to App.

56

Add device

Wi-Fi Setting

salestest

Input Wi-Fi Password

Wi-Fi Setting

Setting Wi-Fi

Smart Wi-Fi AP Hotspot

NO SIM

100%

MEYE_898888

MEYE_1022222

TP-LINK

i

NoteTouch “Next” go to setup Wi-Fi. Please

connect your smart phone to Wi-Fi: MYEY_

404087. Then back to App

NoteTouch

AP Hotspot.

IPCam

Device offline ,please choose camera

network connection mode

4

4-10

1) Insert the microSD card to the camera

IPCam

Add new device

Device List

Touch this button for

setting App“Authority. Multi-Media,

System,About us, Update, Logout.”

Live video stream on smartphone

Microphone

9

2) MicroSD card format and record setting

9.Pan & Tilt

2.Screenshots

FAQ1: MicroSD card record and playback setting

Log in “Sricam” App and follow the stepsSetting-> Record Setting-> SD card Formatting-> Record

Switch

(Note: If the SD card recording is full, it will automatically loop coverage, you do not need to

manually delete the video files).

5

Record Setting

SD Card Free Space:827M

SD Card Formatting

Record Type

Record Switch

SD Card Total Space:3784M

Manual Record

Alarm Record

Timing Record

FAQ1-1 FAQ1-2 FAQ1-3

FAQ1-4 FAQ1-5

Playback-63

Devices List

SD card videos

Latest 1 day Latest 3 days

Latest 1

month months

Lastest 3

Phone local videos

disc1/2017-02-02_14:00:00_S.av (1123S)

disc1/2017-02-02_13:30:00_S.av (1800S)

disc1/2017-02-02_13:00:00_S.av (1800S)

home Add new device

Modify Settings DeletePlayback

Devices List

IPCam

Add new device

Modify Settings

DeletePlayback

Settings

home

Device information

Time Setting

Media Setting

Security Setting

Network Setting

Alarm Setting

Record Setting

Defence Setting

Storage Setting

!

FAQ2: Configure and watch live videos on AP Hotspot mode

4) Record Playback on PC

For video files transfer from microSD card to your PC and playback ,you need use the “SricamPC”App

For “SricamPC”App and user manualplease visit website: www.sricam.com/download.html

3) Record Playback on App

1

2

It is worth watching live video on AP Hotspot mode when you using a charged or unstable WiFi internet.

But before use AP Hotspot, you must have an useable internet no matter is charged or unstable.

Because download and start the App Sricam need internet.

6

Add deviceAdd deviceDevice List

Note: The “Device ID” can

be found on the label which is

attached to the camera.

Add new device

IPCam

Input password(default:888888)

Live video stream on smartphone

Microphone

9

9.Pan & Tilt

2.Screenshots

FAQ2-1 FAQ2-2 FAQ2-3

FAQ2-4

Device is in AP LAN(local area network)

mode,do you need connect it to Wi-Fi

network

Skip Wi-Fi Setting

Step 1. Sricam App Installation.

Step 2. Register an App user account.

Step 3. Product Connection.

Step 4. Login Sricam App with the registered user account.

Step 5. Logout App and connect your smart phone to the Wi-Fi SSID: MEYE_Camera ID. ( For

example: Camera ID is 404087, WiFi SSID is: MEYE_404087).

Step 6. Start App and add the camera.

About Step 1, Step 2, Step 3, please go to user manual page 2 and page 3.

More FAQs please visit: www.sricam.com/faqs

7

Page is loading ...

Sricam SP009C, SP020 Quick User Manual

Related papers

Other documents