Dometic AE Systems Foot Brace Kit 3108943.006_For 8310002.000 Hardware Installation guide

Hello! I've reviewed the Installation Instructions for the Dometic Foot Brace Kit 3108943.006. This document provides a step-by-step guide for installing the braces, which involves removing and reinstalling hex screws and lock nuts. The kit includes 4 braces, and clear silicon sealant is needed. Feel free to ask me any questions you have regarding the installation process or the components of the kit.
What should be done before starting the installation?

What parts are included in the kit?

Is special knowledge needed to install this kit?

INSTALLATION INSTRUCTIONS

for MODEL 8310002.000 Hardware

Foot Brace Kit 3108943.006

1.Open awning to full extension.

2.While controlling the inner arm assembly, remove hex

screw and lock nut that secures the inner arm assem-

bly to the mounting bracket. See FIG. 1.

3.Remove the two (2) hex screws that fasten mounting

brackets to side wall. See FIG. 1.

4.Place two (2) braces in position (one each side of

mounting bracket) and re-install the two (2) hex screws

removed in Step 3. Use clear silicon sealant to seal

where screw enters the coach. See FIG. 2.

5.Re-install inner arm to bracket using hex screw and

lock nut removed in Step 1. See FIG. 2.

6.Repeat for other side.

Form No. 3108966.007 5/99

LaGrange, IN 46761

FIG. 1

FIG. 2

THIS KIT CONTAINS THE FOLLOWING PARTS:

4 ea. 3108912.001MBrace

1 ea. 3108966.007 Installation Instructions

These instructions must be read and under-

stood before installation of this kit. This kit

must be installed by a Dometic Service Cen-

ter or a qualified service technician. Modifi-

cation of this product can be extremely haz-

ardous and could result in personal injury

or property damage.