Spacetronik SPD-D1M1 User manual

Type
User manual

Spacetronik SPD-D1M1 lets you visually confirm a visitor's identity. It supports unlocking by password, access card, and NFC keyfob. Supports up to 1000 access cards and 200 passwords. Features easy setup and use, name directory, outdoor station address setting, external camera connectivity, volume and brightness adjustment, and more.

Spacetronik SPD-D1M1 lets you visually confirm a visitor's identity. It supports unlocking by password, access card, and NFC keyfob. Supports up to 1000 access cards and 200 passwords. Features easy setup and use, name directory, outdoor station address setting, external camera connectivity, volume and brightness adjustment, and more.

2-wire Intercom System
Spacetronik SPD-D1M1
USER MANUAL
Please read this manual carefully before using the product.
!
1
Before Using
Part Names
No.Name & description
1
2
4
5
7
9
8
6
3
Infrared induction
Green light on when unlocking
1
2
3
4
5
6
7
8
Blue light on when calling
Fill-in flash and light sensor
Camera
Speaker
IC card swiping area
Touch screen
Microphone
9
TF card port
10
Outdoor station
TF card port
10
115mm (3.8in)
246mm (8.0in)
55mm (1.8in)
Parts and Functions
Before Using
Mounting
2
1 2 3
1 2 3
Drill a hole and attach the rain
cover to it
Attach the unit to the rain cover
correctlly
The last view for all mounting
BUS: (L1, L2) non-polarity bus line
CAM: Extra camera connection port
LOCK: Electronic lock connection port
VOL: Volume adjustor
DIP: DIP switches for system configurations.
SIP1: Door lock jumper
4
A B CCCDDD
85-260AC
ON DIP
666111222333444555
ID=000
ON DIP
666111222333444555
ID=100
ON DIP
666111222333444555
ID=010
ON DIP
666111222333444555
ID=110
Terminal Description
Multi door station
Cn2
SIP1
Cn5
VI- VI+
LOCK
NO NC COM GND GND OPEN
Before Using
3
A B C D
OFF ON
A B C D
OFF ON
ON DIP
6 71 2 3 4 5
Code=24
ON DIP
6 71 2 3 4 5
Code=44
ON DIP
6 71 2 3 4 5
Code=14
ON DIP
6 71 2 3 4 5
Code=34
ON DIP
6 71 2 3 4 5
Code=10 4
ON DIP
6 71 2 3 4 5
Code=12 4
ON DIP
6 71 2 3 4 5
Code=9 4
ON DIP
6 71 2 3 4 5
Code=11 4
3
2
5
6
C
B
A
85-260AC
7
ON DIP
61 2 3 4 5
1
ID=000
When monitor quantity < 20
Cable Usage
2
Parallel cable 2x0.75mm
A
60
80
B
60
80
C
30
40
When monitor quantity > 20
Cable Usage A
60
80
B
60
80
C
30
40
2
Parallel cable 2x1mm 2
Parallel cable 2x1.5mm
2
Parallel cable 2x1mm
Before Using
4
Before Using
Operation Screens
digital call screen name list call screen searching screen unlocking screen
Operation Screens
Home page is the first page when outdoor station stand-by. When outdoor station standby to
start, there is no image show on the screen, you need to click any places of the screen, outdoor
station will be activated, home page is the first page after outdoor station activated.
(Home page)
5
User Interface
Before Using User Interface
No.Description
1Digital call screen
1 2 3 4
5
6
7
Home page
Name list call screen
2
Searching screen
3
Unlocking screen
4
Backspace key
Calling key
Language choice
5
6
7
6
Operation Screens
7
Before Using User Interface
No.Description
5
4
Communication Screen
Shows the information of the destination station1
Indicates outgoing call is being made2
Exit calling
3
1
2
3
Decrease ringtone volume4
Increase ringtone volume5
The following screen is displayed when calling a person to visit.
2
4
3
After answer the call, talk with indoor monitor
Communication Screen
No.
Description
Decrease calling volume
1
2
3
1
Increase calling volume
Exit key
4
Indicates in communication
How to use Placing a call
Use to delete incorrectly entered Unit
Numbers.
Calling key
Calling a Person to Visit
Calling using the keypad
1.Enter the "Unit Number" 2.Tap
3..Speak with the other party
4. Tap to end
communication.
8
How to use Placing a call
2. .Speak with the other party
3. Tap to end
communication.
Page up
Page down
Calling using the Direct Call List
1.Tap the name to visit
Choose calling name list
Name list interface
9
How to use Placing a call
1. Enter the resident's name
Use to delete incorrectly entered name.
2.
Tap the name to visit
Calling by searching for a name
4. Tap to end
1. Speak with the other party
Use the keyboard to search for a resident by name.
Call and communicate with the person to visit by selecting from the search results.
communication
10
How to use
1. Enter access code.
Door released icon
unlocking interface
Releasing by entering Access Code
Unlocking the door
An electric lock can be released by entering Access Code using the keypad.
Note
The door release duration varies depending on the
settings. The door released icon will be displayed for
approximately 3 seconds regardless of the set duration.
Input 4 bit unlocking password(default 8888)
Operations while placing a call, in communication, and
paging
11
How to use
Operations while placing a call, in communication, and
paging
Release the door using access control credentials (cards, tabs, tags, mobile)
1. Hold the access control credential
Card reader
Card reader
indicator
Door released icon
Note
The door release duration varies depending on the access
control system settings. The door released icon will be
displayed for approximately 3 seconds regardless of the
set duration.
The door released icon may not be displayed.
Access control credentials are registered on the access
control system. Refer to the manual of the access control
system for details.
The unlock tone or audio guidance may play
when the door is released.
• The door released icon will be displayed for
approximately 3 seconds.
• If the proximity key is authenticated, the Card
reader indicator will turn ON (green) for
approximately 1 seconds.
12
Door release can be activated by passing an access control credential.
Settings and Adjustments
1. Tap .
2. Tap the language to display
Selecting the Display Language
Language choice
Visitors may temporarily select a different display language if needed.
Tap to return to the previous screen.
The setting will be changed.
Settings and Adjustments
13
Settings and Adjustments
No.Description
1Volume Adjustment
2
Function Setting
2
Password Setting
3
Interface Setting
4
Restore To Original Factory Settings
Language Setting
IC Operation
5
6
7
4
6
8
1
3
5
7
Updata System or Format SD Card
Return To Main Interface
8
9
9
Enter system setting screens
Long press screen 2 seconds,
input management password(default 1234)
Settings and Adjustments
14
NFC
Calling volume
Ringtone volume
Setting screens
Return key
1.Volume adjustment screen
2.Function setting screen
Outdoor Station Address
Unlocking Time(unit: Second)
Calling Name List Modified
External Camera Is Allowed
Return key
Settings and AdjustmentsSettings and Adjustments
15
Setting Management Password
Setting Unlocking Password
Return Key
3.Password setting screen
4.Interface setting
Background lighting brightness
Return key
Delete All The Password
5.Restore to the original factory settings
Input the management password(default 1234), restore to the original factory settings.
Settings and AdjustmentsSettings and Adjustments
16
Setting screens
Add User Card
Add Management Card
Return Key
6.Volume adjustment screen
7.Program update
Delete All The Cards
Delete User Card
Put the program into SD card, press Download key, update the program.
After finished the update will restart automatically.Press Format SD Card key,format SD card.
Settings and AdjustmentsSettings and Adjustments
Error screen Cause Solution
The wrong number was entered.Enter the correct number.
8.Error screen troubleshooting
17
Setting screens
Choose the name list you want to modify
Re-input the name, after modified press enter key
Non-ticking to make the name
list can be modified
9.Modify the name in calling name list
Ticking to make the name list can be modified.
Settings and AdjustmentsSettings and Adjustments
18
Setting screens
SPECIFICATIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Spacetronik SPD-D1M1 User manual

Type
User manual

Spacetronik SPD-D1M1 lets you visually confirm a visitor's identity. It supports unlocking by password, access card, and NFC keyfob. Supports up to 1000 access cards and 200 passwords. Features easy setup and use, name directory, outdoor station address setting, external camera connectivity, volume and brightness adjustment, and more.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI