2. Fashion & style
  3. Watches
  4. Casio
  5. MTP-B135MG
MTP-B135MG

Casio MTP-B135MG User guide

  • Hello! I have analyzed the provided Operation Guide for the Watch 5703. This document explains how to adjust the time and calendar features, including the day and day of the week, with the help of the watch crown and also how to use the rotary bezel to measure elapsed time. There is also advice on how to work with a screw-in crown and how does low battery alert works. I am ready to answer your questions about your device based on this document.
  • How do I adjust the time on the watch?
    How do I set the day indicator?
    How do I set the day of the week indicator?
    What does it mean when the second hand jumps at two-second intervals?
    What should I do if my watch has a screw-in crown?
1
Operation Guide 5703
MA2202-EA © 2022 CASIO COMPUTER CO., LTD.
Crown Operations
Some water-resistant models (10BAR, 20BAR) have a screw-in
crown. When you need to perform a crown operation, rotate
it towards you to unscrew it. Then pull the crown out. Avoid
applying undue force when pulling. The watch loses its water
resistance while the crown is unscrewed. After performing a
crown operation, fully screw the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼ mark.
Start
Elapsed time
Current
Specifications
Accuracy at normal temperature
(per month) Battery type Battery life
±20 seconds SR920SW Approx. 3 years
Other: Low battery alert
Specifications are subject to change without notice.
You can also find information about
operational procedures at the CASIO website.
https://support.casio.com/global/en/wat/model/5703/
x Your watch may differ somewhat from the one shown in the illustration.
Day of the week indicator
30
T
H
U
Hour Hand
Second Hand
Minute Hand
Day Indicator
Click 2
Click 1
Crown
To adjust the time setting
When the second hand is at 12 o’clock, pull
the Crown out to Click 2.
Rotate the Crown to change the time setting.
Push the Crown back in on a time signal to
resume timekeeping.
Note
x Take care that you set the
correct AM or PM time.
x When changing the time,
move the minute hand
four or five minutes past
your final setting, and then
back it up to the setting
you want.
To change the day indicator setting
Pull the Crown out to Click 1.
Rotate the Crown towards you to set the
day.
Push the Crown back in.
Note
x The day indicator setting
uses a 31-day month.
Make adjustments for
months of shorter lengths.
x Avoid changing the day
indicator setting between
the hours of 9:00 p.m.
and 4:00 a.m. Otherwise,
the day indicator may
not change correctly at
midnight.
To change the day of the week indicator
Pull the Crown out to Click 1.
Rotate the Crown away from you to set the
day of the week.
Push the Crown back in.
Note
x
Avoid changing the day of
the week indicator setting
between the hours of 9:00
p.m. and 4:00 a.m.
Low Battery Alert
x
The second hand will jump at two-second intervals to alert you when battery power is low.
x
Have the battery replaced as soon as possible after low battery alert is indicated.
/