Quick Install Guide Sereno Roman Tub Faucet, SRT-4372
Step 2
Fasten valves to deck
Step 6
Connect supply lines
Step 5
Attach faucet handles
Step 7
Connect handspray to hose
Step 9
Flush water supply lines
and check for leaks
finished deck, front view
Step 4
Attach faucet collar
Step 3
Attach holder to deck
Step 8
Connect handspray
supply lines
Step 1
Fasten spout to deck
Handspray
Operation
PLUMBERS
PUTTY
6 mm
Model Numbers
Tools & Materials
Need Help?
Symmons customer service:
(800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 8:00 am - 7:30 pm EST
www.symmons.com/service
Technical help•
Product information•
Warranty policy.•
Roman Tub Faucet SRT-4372
Installation and Service Instructions
Sereno
™
SRT-4372 ................Chrome finish
SRT-4372-STN .......Satin Nickel finish
Step 1 Fasten faucet spout & hoses to deck
Step 2 Fasten valves to deck
D2
D1 = D2
D1
gasket
thick washer
brass nut
blue cap
(cold)
fastener
thin washer
gasket
2"
(51 mm)
red cap
(hot)
grooves
(cold)
nished deck
front view
red cap
(hot)
blue cap
(cold)
Step 3 Fasten handspray holder to deck
Step 4 Attach faucet collars
Step 5 Attach faucet handles
OFF = CW
OFF = CCW
Caution: If replacing an older faucet ensure water supply is
turned
OFF before removing and then turn faucet handles ON
to relieve water pressure.
u-gasket
u-washer
fastener
gasket
gasket
brass rod
nished deck
front view
gasket
washer
brass nut
O-ring
blue cap
(cold)
Installation Instructions
Page 2
Step 6 Connect supply lines to valves
Step 7 Connect handspray to hose
Step 8 Connect handspray to supply line
Step 9 Flush supply lines and check for leaks
Care of faucet fi nish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Step 1 Remove handle and collar
Step 2 Remove and replace cartridge
Step 3 Replace collar and handle
Valve cartridge replacement
OFF = CCW
OFF = CW
hot
cold
blue
cap
red
cap
Page 3
3-3/4"
95 mm
2-3/8" (60 mm)
1" dia. (25 mm)
Hole size
1-1/16" (27 mm) min.
1-1/2" (38 mm) max.
Finished deck thickness
1-3/8" (35 mm) max.
Dimensions Sereno Roman Tub Faucet, SRT-4372
8" (203mm) min.
16" (406 mm) max.
7-1/2" (191mm)
6-1/2"
165 mm
2" (51 mm)
10-5/8"
270 mm
2" (51 mm) dia.
2-1/8" (54 mm) dia.
2" (51 mm) dia.
4" (102 mm) min.
Hole size
1-1/16" (27 mm) min.
1-1/2" (38 mm) max.
KN-113
identified
by groove
KN-114 (hot)
OFF = CW
KN-113 (cold)
OFF = CCW
valve cartridge
RT-170
*
hot and cold
handles included
plug button (2)
screw (2)
handle (2)
Faucet Handle
Part Number Item (Qty)
Parts Assembly Sereno Roman Tub Faucet, SRT-4372
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.
Note: For decorative nish faucets add sufx
letters to parts marked with an asterisk as follows.
BRS Radiance
®
polished brass nish
STN Radiance
®
satin nickel nish
*
o-ring
u-gasket
u-washer
spout fastener
brass rod
gasket
brass tting
gasket
thick washer
cartridge
brass nut
spout
supply hose
supply line
hose
spout
handle
collar
base
fastener
thin washer
gasket
handspray
gasket
hose
connector
holder
o-ring
gasket
washer
brass nut
handspray
hose
gasket
brass tting
handspray
hose
extension
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, (781) 843-3849
Website: www.symmons.com
■ Email: [email protected]
© 2006, 2008 Symmons Industries, Inc. Printed in U.S.A.
■ ZV-575 ■ 051608
/
