Finished deck thickness
1-3/8" (35 mm) max
8" (203mm) min
16" (406 mm) max
9-1/4" (235 mm)
2-1/4"
(57 mm)
2" (51 mm) dia
Hole size
1-1/16" (27 mm) min
1-1/2" (38 mm) max
Note: Dimensions subject to change without notice
Hole size
1-3/8" (35 mm) min
1-3/4" (44 mm) max
3-1/4"
(84 mm)
3-7/8"
(98 mm)
4-7/8"
(124 mm)
2-1/4"
(57 mm)
7-1/4"
(184 mm)
2" (51 mm) dia
2-1/2" (64 mm)
4" (102 mm) min
1-7/8"
(48 mm)
1-1/8" (29 mm) dia
1/2" - 14 NPSM
exible hose
handspray hose
supply outlet
8-1/2" (214 mm)
handspray hose
supply inlet
Hole size
1-1/4" (32 mm) min
1-5/8" (41 mm) max
Dimensions Naru Roman Tub Faucet, SRT-4172
handle used in
either hot or cold
location
KN-113-EXT-KIT
(Cold cartridge kit)
KN-114-EXT-KIT
(Hot cartridge kit)
(2) Note: screw requires
3mm Allen wrench
(1) Note: screw requires
3/32" Allen wrench
Hot, KN-114
(OFF=CW)
Cold, KN-113
(ON=CCW)
handle
(1)
screw
collar
KN-113
identified
by groove
handle assy.
1 ea. / kit
RT-273-KIT*
Replacement Parts
Part Number Item
(2)
screw
extension
handle kit
assembly*
(ref. table)
handspray,
3-mode
washer
elbow mount
washer
connector
washer
hose
connection
base
gasket
metal washer
nut
Cartridge
(ref. table)
Handspray Assy.
412W-41*
spout, centerbody diverter
assembly RT-280
*
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667, M-F 7:30 am - 6:00 pm EST or check our
website at www.symmons.com for a list of Symmons distributors.
Note: For decorative nish faucets add three letter nish sufx code to parts marked with an asterisk
.
mounting
retainer
gasket
1/2" hose
with 1/2-14
NPSM female
connectors
1/2" hose
with 1/2-14
NPSM female
connectors
nut, M28 x 1.5
(used when
attaching piping)
handspray hose,
0.20mm x 5 feet
ange nut
washer
metal washer
brass nut
ow
regulator
Parts Assembly Naru Roman Tub Faucet, SRT-4172
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ ZV-590 REV C ■ 121018