Beta 1569/F Operating instructions

Beta
Brand
Beta
Model
1569/F
Category
Coffee making accessories
Type
Operating instructions

Beta 1569/F

Below you will find brief product information for Beta 1569/F:

  • Silentblock Kit for Fiat Panda / Fiat 500-Ford KA:

    • Removes and inserts silentblocks in Fiat 500 and Ford Ka vehicles.

  • Extraction and Installation Tool:

    • The kit includes various tools and washers to assist in the extraction and installation of silentblocks.
    • It includes a removal bush, extraction and insertion washers, a screw, and nuts.

  • Step-by-Step Instructions:

    • The instruction manual provides clear, step-by-step instructions for both extracting and installing silentblocks.
    • It includes diagrams and safety precautions to ensure proper usage.

Beta 1569/F

Below you will find brief product information for Beta 1569/F:

  • Silentblock Kit for Fiat Panda / Fiat 500-Ford KA:

    • Removes and inserts silentblocks in Fiat 500 and Ford Ka vehicles.

  • Extraction and Installation Tool:

    • The kit includes various tools and washers to assist in the extraction and installation of silentblocks.
    • It includes a removal bush, extraction and insertion washers, a screw, and nuts.

  • Step-by-Step Instructions:

    • The instruction manual provides clear, step-by-step instructions for both extracting and installing silentblocks.
    • It includes diagrams and safety precautions to ensure proper usage.
1569/F
MODE D’EMPLOI
GEBRAUCHSANWEISUNG
INSTRUCCIONES
GEBRUIKSAANWIJZING
INSTRUKCJA OBSŁUGI
ISTRUZIONI PER L’USO
INSTRUCTIONS FOR USE
INSTRUÇÕES DE USO
HASZNÁLATI ÚTMUTATÓ
I
D
NL
EN
E
PL
F
PT
HU
Page is loading ...
Page is loading ...
Page is loading ...
5
INSTRUCTIONS FOR USE
EN
ART 1569/F
Silentblock kit for Fiat Panda / Fiat 500-Ford KA :
Removing / inserting Fiat 500 – Ford Ka silentblocks
Support with mounted silentblock:
Unscrew nut and remove screw: then pull down support to remove
silentblock.
REMOVAL
1
2
3
4
5
6
7 8
9
1 : Washer with bearing (insertion)
2 : Removal bush
3 : (N°. 2) Nuts M 12
4 : Screw M12
5 : Insertion washer
6 : Removal washer
7 + 8 : : Removal tool.
9 : Removal bush with bearing
Mount tools 1,2,3,4,6 as shown in picture.
Mark silentblock position BEFORE removal.
1
2
3
4
6
}
6
Screw nuts with 30 mm wrenches until silentblock is fully removed.
Keep screwing with both 30 mm wrenches until silentblock is fully
inserted.
N.B. : Apply grease to screw around nut rotation area, and also
oil silentblock seat before insertion.
INSERTION
To insert silentblock, put it into position checking previously made
marks, and position washer 5 to accommodate silentblock at support
output; use tools 1,3,4,5.
1
3
4
5
3
}
}
INSTRUCTIONS FOR USE
EN
7
INSTRUCTIONS FOR USE
EN
Insert tool 7 + 8 between silentblocks to remove: (photo) position washer 5, and use bush with bearing 9 to
remove right-hand silentblock; REVERSE POSITION to remove left-hand silentblock. Use 19 mm and 30 mm
wrenches (grease screw 8 before use) .
Fit silentblock onto screw and place it with head on washer with bearing 1; get screw onto other side of support
and position milled washer 5; screw nut M12, checking that everything is aligned before screwing. Oil silentblock
(and, before, seat) and use two 30 mm wrenches to rotate nuts. Keep screwing until silentblock is fully inserted.
REMOVAL
INSERTION
5
8
7
9
5
3
1
3
4
REMOVING / INSERTING SILENTBLOCKS OF PANDA (4X4, CROSS, NATURAL GAS)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
32
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20845 Sovico (MB) ITALY
Tel. +39 039.2077.1 - Fax +39 039.2010742
www.beta-tools.com - info@beta-tools.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Beta 1569/F Operating instructions

Beta
Brand
Beta
Model
1569/F
Category
Coffee making accessories
Type
Operating instructions

Beta 1569/F

Below you will find brief product information for Beta 1569/F:

  • Silentblock Kit for Fiat Panda / Fiat 500-Ford KA:

    • Removes and inserts silentblocks in Fiat 500 and Ford Ka vehicles.

  • Extraction and Installation Tool:

    • The kit includes various tools and washers to assist in the extraction and installation of silentblocks.
    • It includes a removal bush, extraction and insertion washers, a screw, and nuts.

  • Step-by-Step Instructions:

    • The instruction manual provides clear, step-by-step instructions for both extracting and installing silentblocks.
    • It includes diagrams and safety precautions to ensure proper usage.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents