Beta 1452K is a versatile and easy-to-use valve spring compressor designed to make removing and installing valve springs a breeze. With its adjustable flange system, this tool can accommodate a wide range of valve sizes, making it suitable for various engines. The step-by-step instructions provided in the manual ensure safe and efficient operation.
Beta 1452K is a versatile and easy-to-use valve spring compressor designed to make removing and installing valve springs a breeze. With its adjustable flange system, this tool can accommodate a wide range of valve sizes, making it suitable for various engines. The step-by-step instructions provided in the manual ensure safe and efficient operation.
1)Selezionare una delle flange in dotazione Ø: 21,
30, 32 mm. Installarla sul morsetto alzavalvole fissandola con l'apposita vite.
1) Select one of the flanges supplied with the valve spring compressor, Ø: 21, 30, 32 mm. Fix it onto
the valve spring compressor by means of the screw.
1)Choisir l'une des brides fournies Ø 21, 30 ou 32 mm. L'installer sur le lève-soupapes et la fixer à
l'aide de la vis prévue à cet effet.
11
)Selecciónese una de las bridas que se suministran en dotación Ø: 21, 30, 32 mm. Instálese en el
desmontador de válvulas fijándola con el tornillo destinado al efecto.
1) Einen der mitgelieferten Flansche Ø 21, 30, 32 mm auswählen und mit der dazugehörigen
Schraube am Ventilfederspanner befestigen.
2) Aprire il morsetto agendo sulla vite di regolazione. Chiudere il morsetto posizionando la flangia
sulla valvola liberando la molla.
2) Open the compressor by means of the adjusting screw. Close the compressor, placing the flange
onto the valve, releasing the spring.
2) Ouvrir le lève-soupape en desserrant la vis de réglage. Fermer le lève-soupape en installant la
bride sur la soupape qui libère le ressort.
2) Ábrase el desmontador maniobrando el tornillo de ajuste. Ciérrese el desmontador colocando la
brida en la válvula liberando el muelle.
2) Den Ventilfederspanner durch Drehen der Stellschraube öffnen. Den Ventilfederspanner
schließen und dazu den Flansch auf dem Ventil platzieren und die Feder lösen.
3) Ripetere l'operazione per ogni valvola che necessita l'intervento.
3) Repeat the operation for each valve which requires it.
3) Répéter cette opération pour chaque soupape
nécessitant cette intervention
3) Repítase la operación por cada válvula que precisa de
intervención.
3) An allen Ventilen, die gewartet werden müssen,
auf die gleiche Weise vorgehen.
11445522KK
MORSETTO ALZAVALVOLE
VALVE SPRING COMPRESSOR
LÈVE-SOUPAPES
DESMONTADOR DE VÁLVULAS
VENTILFEDERSPANNER
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20050 Sovico (MB)
Te. 039.2077.1 - Telefax 039.2010742
www.beta-tools.com - [email protected]
M20990274
INSTRUCCIONES DE USO
ISTRUZIONI D’USO
I
INSTRUCTIONS FOR USE
GB
MODE D’EMPLOI
F
E
BEDIENUNGSANLEITUNG
D
1)Selezionare una delle flange in dotazione Ø: 21,
30, 32 mm. Installarla sul morsetto alzavalvole fissandola con l'apposita vite.
1) Select one of the flanges supplied with the valve spring compressor, Ø: 21, 30, 32 mm. Fix it onto
the valve spring compressor by means of the screw.
1)Choisir l'une des brides fournies Ø 21, 30 ou 32 mm. L'installer sur le lève-soupapes et la fixer à
l'aide de la vis prévue à cet effet.
11
)Selecciónese una de las bridas que se suministran en dotación Ø: 21, 30, 32 mm. Instálese en el
desmontador de válvulas fijándola con el tornillo destinado al efecto.
1) Einen der mitgelieferten Flansche Ø 21, 30, 32 mm auswählen und mit der dazugehörigen
Schraube am Ventilfederspanner befestigen.
2) Aprire il morsetto agendo sulla vite di regolazione. Chiudere il morsetto posizionando la flangia
sulla valvola liberando la molla.
2) Open the compressor by means of the adjusting screw. Close the compressor, placing the flange
onto the valve, releasing the spring.
2) Ouvrir le lève-soupape en desserrant la vis de réglage. Fermer le lève-soupape en installant la
bride sur la soupape qui libère le ressort.
2) Ábrase el desmontador maniobrando el tornillo de ajuste. Ciérrese el desmontador colocando la
brida en la válvula liberando el muelle.
2) Den Ventilfederspanner durch Drehen der Stellschraube öffnen. Den Ventilfederspanner
schließen und dazu den Flansch auf dem Ventil platzieren und die Feder lösen.
3) Ripetere l'operazione per ogni valvola che necessita l'intervento.
3) Repeat the operation for each valve which requires it.
3) Répéter cette opération pour chaque soupape
nécessitant cette intervention
3) Repítase la operación por cada válvula que precisa de
intervención.
3) An allen Ventilen, die gewartet werden müssen,
auf die gleiche Weise vorgehen.
11445522KK
MORSETTO ALZAVALVOLE
VALVE SPRING COMPRESSOR
LÈVE-SOUPAPES
DESMONTADOR DE VÁLVULAS
VENTILFEDERSPANNER
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20050 Sovico (MB)
Te. 039.2077.1 - Telefax 039.2010742
www.beta-tools.com - [email protected]
M20990274
INSTRUCCIONES DE USO
ISTRUZIONI D’USO
I
INSTRUCTIONS FOR USE
GB
MODE D’EMPLOI
F
E
BEDIENUNGSNALEITUNG
D
1452K.qxp:1452K.qxd 28-04-2010 14:44 Pagina 1
-
1
Beta 1452K is a versatile and easy-to-use valve spring compressor designed to make removing and installing valve springs a breeze. With its adjustable flange system, this tool can accommodate a wide range of valve sizes, making it suitable for various engines. The step-by-step instructions provided in the manual ensure safe and efficient operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Beta 1452K Istruzioni per l'uso
- français: Beta 1452K Mode d'emploi
- español: Beta 1452K Instrucciones de operación
Related papers
-
Beta 1467 Operating instructions
-
-
-
-
-
-
-
-
-