Kichler Lighting 52098BK is a versatile lighting fixture that can be used in a variety of settings. With its adjustable mounting strap and swivel, it can be positioned to provide optimal lighting for your space. The fixture is also easy to install, with clear instructions and all necessary hardware included.
Kichler Lighting 52098BK is a versatile lighting fixture that can be used in a variety of settings. With its adjustable mounting strap and swivel, it can be positioned to provide optimal lighting for your space. The fixture is also easy to install, with clear instructions and all necessary hardware included.
IS-52098-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Lower main body[L] down onto shade[N], carefully
passing socket aached to main body through hole on
top of shade (see Fig. 1).
2) Screw socket ring[O] onto threads on outside of socket
to secure shade to main body.
3) Pass xture wires from coupling on top of main body
through desired number of stems[A] and short threaded
tubes[B]. Screw stems together using supplied short
threaded tubes.
NOTE: Thread locking compound must be applied to
all stem threads as noted with (4) symbol to prevent
accidental rotaon of xture during cleaning, relamping,
etc.
Fixture Diagram
Parts List
[A] Stems
[B] Short
Threaded
Tubes
[C] Swivel
[D] Canopy
[E] Lockwasher
[F] Hexnut
[G] Mounting
Strap
[H] Mounting
Screws
[I] Outlet Box
[J] Knobs
[K] Lockwashers
[L] Main Body
[M] Strap
Mounting
Screws
[N] Shade
[O] Socket Ring
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
CLEANING:
• Always be certain that electric current is turned o before
cleaning.
• Only a so damp cloth should be used. Harsh cleaning
products may damage the nish.
Installaon Instrucons (connued)
Installaon Instrucons
4) Screw connected stems into coupling on top of main
body using a short threaded tube.
5) Pass xture wires from last stem through swivel[C].
Swivel should be installed with the longer end hanging
down towards the mounng stems.
6) Screw longer end of swivel into end of last stem.
Note direcon of swivel in accordance with ceiling. If
swivel is not yet installed, follow steps 7, 8 & 9. If swivel is
already installed, go to step 10.
7) Pass xture wire through hole in canopy[D]. Pass
threaded pipe on end of swivel up through hole in
canopy.
8) Pass xture wire through lockwasher[E]. Thread
lockwasher onto end of threaded pipe protruding from
inside canopy.
9) Pass xture wire through hexnut[F]. Thread hexnut onto
end of threaded pipe.
NOTE: Fixture wire should not be cut shorter than 20
inches from above the canopy.
10) Find the appropriate threaded holes on mounng
strap[G]. Assemble mounng screws[H] into threaded
holes.
11) Aach mounng strap to outlet box[I] using the strap
mounng screws[M]. Mounng strap can be adjusted to
suit posion of xture.
12) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
13) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
14) Push xture to ceiling, carefully passing mounng screws
through holes in canopy.
NOTE: Be certain wires do not get pinched between
mounng strap and canopy, or canopy and ceiling.
15) Use knobs[J] and lockwashers[K] to secure canopy.
Tighten to secure.
16) Insert recommended bulb (Not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fig. 1
N
L
L
B
A
►
►
►
A
E
D
J
K
F
I
G
H
M
►
►
C
N
O
Page is loading ...
Page is loading ...
-
1
-
2
-
3
Kichler Lighting 52098BK is a versatile lighting fixture that can be used in a variety of settings. With its adjustable mounting strap and swivel, it can be positioned to provide optimal lighting for your space. The fixture is also easy to install, with clear instructions and all necessary hardware included.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Kichler Lighting 52272BK User manual
-
Kichler Lighting 52269BK User manual
-
Kichler Lighting 52314BNB User manual
-
Kichler Lighting 52258BK User manual
-
Kichler Lighting 52255BK User manual
-
Kichler Lighting 44380BK User manual
-
Kichler Lighting 43531CLP User manual
-
Kichler Lighting 43531CLP User manual
-
Kichler Lighting 52285NI User manual
-
Kichler Lighting 52033BK User manual
Other documents
-
Kichler 52314CLP Operating instructions
-
-
-
-
-
-
Generation Lighting F2403EN3/3BS Installation guide
-
Kichler 55146PN User manual
-
-
Kichler 52516BK User manual
