2. Midmark
  3. Multi-parameter Monitors
Multi-parameter Monitors

Midmark Multi-parameter Monitors Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Midmark Multi-parameter Monitors Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I turn on the monitor?
    How do I access the Settings menu?
    How do I enable the CO2 module?
    What happens if I select "On" in the Module Setup menu?
    How do I turn off the CO2 module?
    What is the purpose of the Warning menu?
    How do I restart the monitor?
    How do I access the User Maintenance menu (Masimo ONLY)?
    How do I change the CO2 type to Masimo (Masimo ONLY)?
    How do I display CO2 readings?
    How do I check the software version of the Cardell Touch?
English-1
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
Applies to Models:
8019 - Pages 2 thru 4
8013 - Pages 5 & 6
003-2810-00 Rev. AA1 (3/4/2020)
CO2 Kit Instructions [002-1895-00 & 002-1896-00]
TP201 Rev. A
Style G
Model 8019
Midmark Multiparameter Monitor
Model 8013
Cardell Touch
English-2
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
Applies to Models:
8019 Multiparameter Monitor
CO2 Kit Instructions [002-1895-00 & 002-1896-00]
TP201 Rev. A
B
Step 1: Settings
A) Press power button on side of monitor to
turn on power.
B) Press the “Settings” Touch Screen button.
C) Press the “Module Setup” button.
A
Style G
C
Airway adapters and sampling lines
are intended for single patient use.
To reorder visit www.midmarkserviceparts.com,
or call 1-800-MIDMARK.
Attention
Prior to running this procedure be aware
that this will require the monitor to restart,
upon restart, ALL current patient alarm
data will be purged.
003-2810-00
English-3
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
TP201 Rev. A
003-2810-00
Step 2: Module Setup menu
A) Press the “Off” Touch Screen button next to CO2.
A
A
Step 3: Module Setup menus
A) Press the “On” Touch Screen button.
B) Press “X” on top of Module Setup menu.
Step 4: Warning Menu
A) Press the “Ok” button in Warning menu to restart.
B) Count down starts and shuts down monitor.
C) Press power on side of monitor to restart monitor.
A
Step 5: Settings - Masimo ONLY
A) Press the “Settings” Touch Screen button.
B) Press “User Maintenance” from Settings menu.
A
Note: The options you have selected requires the monitor to restart,
Upon restart, all current patient alarm data will be purged.
B
B
B
C
English-4
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
TP201 Rev. A
003-2810-00
Step 7: CO2 Type - Masimo ONLY
A) Press “Respironics” button beside
CO2 Type.
B) Press “Masimo”” button.
Step 8: Warning Menu - Masimo ONLY
A) Press the “Ok” button in Warning menu.
B) Press power on side of monitor to shutdown monitor.
C) Count down starts and shuts down monitor.
D) Press power on side of monitor to restart monitor.
Step 9: Display of CO2
A) Refer to the Midmark Multiparameter Monitor User’s Guide
for CO2 (mainstream) and (sidestream) connection
procedures and parameter setup and usage instructions.
A
A
Step 6: Password - Masimo ONLY
A) Press in box next to Enter Passwords.
B) Enter password “2013” and press “Enter”.
C) Press “Ok” button in Passwords menu
B
B
C
A
B
B
A
C
D
English-5
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
Applies to Models:
8013 Cardell Touch
CO2 Kit Instructions [002-1895-00 & 002-1896-00]
TP201 Rev. A
E
D
C
B
Step 1: Check Software Version
A) Turn on power button for monitor.
B) Press the “NEXT” Touch Screen Quick Access button.
C) Press the “Main Menu” Touch Screen Quick Access button.
D) Scroll down and press the “Info” button.
E) If software version is 1.0.X or 2.0.0, the Cardell Touch is out
of date and requires an update. Contact technical service
at 1-800-MIDMARK x8750 for an electronic download.
F) If software version is 3.0.1 or newer, continue to Step 2.
A
Airway adapters and sampling lines
are intended for single patient use.
To reorder visit www.midmarkserviceparts.com,
or call 1-800-MIDMARK.
003-2810-00
English-6
TP201 Rev. A
© 2014 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
TP201 Rev. A
E
D
C
B
Scroll
down
Step 2: Monitor setup.
A) Press the “Main Menu” Touch Screen Quick Access button.
B) Press the “Monitor Setup” button.
C) Press the “Module Setup” button.
D) Scroll down and press “CO2” to show the side menu which
displays “ON” and “OFF.
E) Press “ON” to turn CO2 module on. The side menu will
automatically close once ON or OFF buttons are pressed.
Close Module Setup Menu.
F) Refer to Cardell Touch User’s Guide for CO2 (mainstream)
and (sidestream) connection procedures and parameter
setup and usage instructions.
A
003-2810-00
/