6251, 6252, 6256 (Powered Carts - DC)

Midmark 6251, 6252, 6256 (Powered Carts - DC) User guide

  • Hello! I am an AI chatbot trained to assist you with the Midmark 6251, 6252, 6256 (Powered Carts - DC) User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DC Laptop & Flat Panel Carts
Quick Reference
Set-up Guide
Please read all parts of this guide. When set-up is complete, do not discard guide.
Please file guide in secure place for future reference.
60 Vista Drive I Versailles, OH 45380-0286
T: 1.800.MIDMARK I www.midmark.com | MMDCSG09 REV B
T: 1.8oo.MIDMARK | www.midmark.com | Version 5.0
NOTE: When your DC Cart has not been used or has been
inactive for over a 24 hour period, it is recommended that
the unit be put into “Sleep” mode to insure battery life.
Please follow these steps (once unit is in sleep mode, to
awaken unit simply plug-in to AC outlet).
•GototheAdvancedDiagnosticScreen.Goto:Setup”inthemenubar.
Scrolldownto“SleepMode”,readpromptandclickyes.
WARNING: If not deploying immediately, make sure the
power system remains plugged in.
Tech Specs
•DCPowered-Series301Software(Rev.5.0)
•Cartcompatibility:DCPowered-series301softwareiscompatible
withallDCseriescarts.
Minimum PC Configuration
•OperatingSystem:Windows2000+ServicePack3
Recommended PC Configuration:
•OperatingSystem:WindowsXP+ServicePack2
•SystemMemory:80K
•HardDisk(freespace):15MB
•ScreenResolution:HighResolution1280+
•PortAvailability:USB2.0
•NotcompatiblewithWindowsVista
1. Prepare for Cart Set-up
Plug-insystemtoACoutlet(cartwillcomeoutof“sleep
mode”)(A).Thechargingindicatoronthefuelgauge
(B)willashwhilechargingandwillturnoffwhenthe
batteryisfullycharged.Theaveragetimeforthe
batterytoreachfullloadis5-6hours.
Note:Batterylifeismaximizedwhenfullychargedat
leastonceaweek.
2. Technology Component(s) Set-up
1.Removeinternalbatteryfromlaptop!Doingso
willensureamaximumruntime*foryou
powersystem.
2.Connectpoweradaptercableintoappropriate
connectionport(C)(usuallyfoundonthe
sidepanelsoflaptop).
3.ConnectinputcableintoUSBportoflaptop(D)
(usuallyfoundontheleftsidepaneloflaptop).
Monitor Setup - DC Monitor is Recommended
(if Laptop Cart is being used, disregard this step)
1.Connectpoweradaptercableintoappropriate
connectionport(E)(usuallyfoundeitheronthe
bottomorbackpanelofmonitor).
*Runtimesarehighlydependentonthepower
managementsettingsoneach
technologycomponent.
3. Electronic Keyless Lock System
(optional)
To unlock: Entercode(2244),turnleverto
unlockedposition(F)(turningknobclockwise)
To Lock:Turnlevertoclosedposition(G),and
andentercodetolock.
To change user code from factory code,
enter #, user code, enter new user code,
enter user code again for confirmation
(for example #, 2244, 6688, 6688).
B
C
D
E
1 6
Midmark | T: 1.800.MIDMARK I www.midmark.com Midmark | T: 1.800.MIDMARK I www.midmark.com
Setup Guide
G
F
A
Diagnostic Screen
8. Test Email
•Providesatestingcapabilityfortheusertoevaluatetheinformationprovided.
9. Event Logging (not part of setup, but an integral part of
the software program)
•Important:Batterycarriesalimited12monthwarranty(onlyifclaims
aresubmittedwithEventLogs).
•Providesasequenceofeventsexperiencedbythepowersystem.Events
displayedarebatterystateofhealth,lowbattery,andshutdown.
11. Your Initial Set-up is complete. Please allow batteries to
fully charge (average time is 5-6 hours).
4. Software Setup
LoadDCLive™(Series301)SoftwareCDintolaptop.Softwarewillautomaticallyinstall.
Ifitdoesnotautomaticallyinstall,gotostartmenuofcomputer,select“mycomputer”,
ndsoftwarecd,anddouble-clickcd.SelectSetupInstallerandgothroughsetup
instructions.Whencomplete,rebootcomputerandreopentheDCLive™(Series301)
softwareprogram.
Main Users Screen
Willappearonceprograminlaunched.
Diagnostics Screen
Toaccessdiagnosticscreen,enterpassword(SERIES 301).TheDiagnosticScreen
willappear(tochangepassword,gotoitem#6).
ThediagnosticInterfaceScreenhasapulldownmenuitemcalled“Setup”found
intheuppermargin.Thismustbeselectedtoaccesstheeditoftheinitial
systemparameters.
Seefollowingsteps(pages3-6)forsetupoptions.
5 2
Midmark | T: 1.800.MIDMARK I www.midmark.com Midmark | T: 1.800.MIDMARK I www.midmark.com
Diagnostic Screen
Password Screen
Main User’s Screen
Software Setup Options
5. System Setup (not needed if evaluating cart)
Withinthediagnosticscreen,accesstheSetupmenuitem.Scrolldown
throughtheitemsandndSeries301Setup.Oncescreenappears
proceedtoenterappropriateconguration/systemsettings.
Thefollowingarebriefdescriptionsofeacheld:
•SetBattery;Selecttheproperbatterytypethatisinstalled
•ServiceDate;Automaticallyupdatedwhenrequiredelds
arecompleted
•ModelType;BatteryModelType
•CartID;Thiseldisuserdened
•MaintenanceCycle;Twocycletypesavailable.
1.Numberofweeks
2.AmpHours:Numberofamphoursfrominitialization
•Duration;Thresholdvalueofthechosenmaintenancecycle
•Set&Send;Sendinformationtothedeviceorsaveittoale.
•Exit;Closescreenandreturntodiagnosticscreen
3 4
Midmark | T: 1.800.MIDMARK I www.midmark.com Midmark | T: 1.800.MIDMARK I www.midmark.com
Setup Screen
6. GUI (Graphic User Interface) Setup
•Changetemperaturedisplay
•ChangedefaultDiagnosticScreenAccesspassword
7. Email Setup
•IPAddressofthemailserverofthenetworkwhichthisdeviceiswithin.
•SenderEmailistheaddressassignedbythenetworkadministrator
•RecipientEmailistheaddressofthelocationthattheEmailalerts
willbesentto
•Subjectisauserdenedeld
•MessageOptionsScreen
Software Setup Options
/