Delfield 8191-EFN Datasheet

8191-EFN
Delfield
Brand
Delfield
Model
8191-EFN
Type
Datasheet

This manual is also suitable for

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
LiquiTec® Cold Pans with Eutectic Fluid technology allows
food in pans to be flush with top of counter. Cold pan meets
NSF standard 7; and can be dropped into any Delfield Mark 7,
Shelleyglas® or Shelleysteel® counters or existing counters.
Top: is one-piece 18-gauge stainless steel, with 5/8” (1.59cm)
overhang around perimeter and die stamped 19.87” x 11.87”
(50.5cm x 30.2cm) openings with depressed edges. Formed
well below each opening is 6.25” (15.9cm) deep with .5” drain
to manifold. Each well, flush with the top, for flush mount pans
to accommodate 12” x 20” (30.5cm x 50.8cm) pans 4” (7.6cm)
or 6” (15.2cm) deep supplied by others. Temperatures of 33°F
(1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room
temperature, meeting NSF 7 requirements.
Sides and bottom: are insulated with high-density closed-
cell environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane. Exterior housing is 22-gauge galva-
nized steel.
Refrigeration: system uses HFC-404A refrigerant. Eutectic
fluid is used as the heat transfer medium. Condensing unit is
suspended below the cold pan on a 16-gauge steel frame. Unit
is supplied with expansion valve and temperature control.
A stainless steel louver is provided for field installation; cutout
dimension is 11” x 22” (27.94cm x 55.88cm). A second opening
11” x 22” (27.94cm x 55.88cm) at the rear of the cabinet should
be provided at installation to allow for proper air circulation.
Electrical system is 115V/60Hz/1Ph with NEMA 5-15P plug.
Specifications
Standard Features
Options &
Accessories
18 gauge stainless steel top construction
LiquiTec® cold pans with eutectic fluid technology
Flush mounted die stamped drawn 12” x 20”
individual 20 gauge wells, run left to right
Wells to be depressed slightly into the top to hold
condensation
Standard 1/2” stainless steel drain
High density environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
Galvanized exterior body
Thermostatic temperature control and expansion
valve standard
Non-marring press fit top gasket
NSF7 certified
Condensing unit is suspended below on a 16
gauge galvanized frame
Environmentally friendly HFC-404A refrigerant
8’ cord
Stainless steel louver is provided standard for field
installation
One year parts and 90 day labor standard
warranty
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8148-EFN 2-pan narrow LiquiTec® cold pan
8169-EFN 3-pan narrow LiquiTec® cold pan
8191-EFN 4-pan narrow LiquiTec® cold pan
•
•
•
Models
8100-EFN
LiquiTec® Slim Line Drop-In Self-Contained Eutectic
Fluid Refrigerated Cold Pans
8100-EFN LiquiTec® Slim Line Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
Single or double service flip-up
sneezeguards
Relocate compressor
Remote refrigeration (specify refrigerant)
•
•
•
8148-EFN
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
8100-EFN
LiquiTec® Slim Line Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
Printed in the U.S.A.
DS8100EFN
09/08
Specifications
Model Counter Cutout
Dimensions
12” X 20”
Pans Held
Volts/Hertz/
Phase
Amps H.P. BTU
Load
NEMA
Plug
Ship
Weight
8148-EFN 46.88” x 17.25”
(119.1cm x 43.8cm)
2 115/60/1 7.5 1/4 379 5-15P 235LBS
(107KG)
8169-EFN 68.50” x 17.25”
(174.0cm x 43.8cm)
3 115/60/1 7.5 1/4 569 5-15P 285LBS
(130KG)
8191-EFN 90” x 17.25”
(228.6cm x 43.8cm)
4 115/60/1 7.5 1/4 758 5-15P
295LBS
(134KG)
Deleld reserves the right to make changes to the design or specications without prior notice.
10.37"
26.3cm
46.38"
117.8cm
10.37"
26.3cm
67.94"
172.6cm
Elevation View
8148-EFN
Elevation View
8169-EFN
10.37"
26.3cm
Elevation View
8191-EFN
89.50"
227.3cm
11.87"
30.1cm
19.87"
50.5cm
Inside Well Dimensions
All Models
47.66"
121.0 cm
18.00"
45.7cm
69.22"
175.8cm
18.00"
45.7cm
Plan View
8148-EFN
Plan View
8169-EFN
90.78"
230.6cm
18.00"
45.7cm
Plan View
8191-EFN
6.48"
16.5cm
7.56"
19.2cm
23.25"
59.1cm
15.69"
39.9cm
16.75"
42.5cm
Right End View
All Models
  • Page 1 1
  • Page 2 2

Delfield 8191-EFN Datasheet

8191-EFN
Delfield
Brand
Delfield
Model
8191-EFN
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents