I35
© 2008 AS America Inc.
TOWN SQUARE
®
CLASSIC CADDIE
FIRE CLAY/WOOD
TOWN SQUARE
®
CLASSIC CADDIE
• Traditional styled storage unit in a Cognac nish
• Can accommodate Town Square
®
Collection 24"
or 27" pedestal sink, both available in 4", 8", and
CHO faucet drillings
• Easy installation combined with hidden storage
• Design-matched to Town Square
®
xtures,
faucets and accessories
Nominal Dimensions with 24" Top:
24" x 20-1/4" x 35-1/2"
(610 x 514 x 902mm)
Nominal Dimensions with 27" Top:
27" x 21-1/4" x 35-1/2"
(686 x 540 x 902mm)
Separate Components:
❏ 0790.004 24" Pedestal top 4" (102mm) centers
❏ 0790.008 24" Pedestal top 8" (203mm) centers
❏ 0790.001 24" Pedestal top Center hole only
❏ 0780.004 27" Pedestal top 4" (102mm) centers
❏ 0780.008 27" Pedestal top 8" (203mm) centers
❏ 0780.001 27" Pedestal top Center hole only
❏ 9370.100 Classic Caddie only
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous Ceramic
• CAN/CSA B45 Series
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Specied:
❏ Pedestal Top Color: 020 White, 178 Black,
222 Linen, 021 Bone
❏ Town Square Faucet:
❏ Centerset Lavatory Faucet: 2555.201 (shown)
❏ Widespread Lavatory Faucet: 2555.801
❏ Other Lavatory Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
Cognac
Revised 2/08
I36
© 2008 AS America Inc.
TOWN SQUARE
®
CLASSIC CADDIE
FIRE CLAY/WOOD
9-5/8"
(244mm)
21-1/4"
(540mm)
27"
(686mm)
27"
(686mm)
FINISHED
WALL
1-3/4" DIA.
STD. DRAIN
OUTLET
20-1/4" (514mm)
2-5/8"
(67mm)
4"
(102mm)
3-3/4"
(95mm)
1-1/4" O.D.
WASTE
*20"
(508mm)
*18"
(457mm)
SUPPLIES AS
REQUIRED
6"
(152mm)
1-1/4" O.D.
TAILPIECE
16-1/8"
(410mm)
14-1/8"
(359mm)
FINISHED
FLOOR
35-1/2"
(902mm)
28"
(711mm)
8"
(203mm)
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
■ FOR REINFORCEMENT ONLY. TAKE ACTUAL DIMENSIONS FROM FIXTURE.
- SLAB/PEDESTAL ANCHORS AND MOUNTING FEATURES TO BE FURNISHED BY OTHERS.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
9-1/2"
(241mm)
20-1/4"
(514mm)
24"
(610mm)
FINISHED
WALL
1-3/4" DIA.
STD. DRAIN
OUTLET
18-3/4" (476mm)
2-5/8"
(67mm)
4"
(102mm)
3-3/4"
(95mm)
1-1/4" O.D.
WASTE
*20"
(508mm)
*18"
(457mm)
SUPPLIES AS
REQUIRED
6"
(152mm)
1-1/4" O.D.
TAILPIECE
16-1/8"
(410mm)
14-1/8"
(359mm)
FINISHED
FLOOR
35-1/2"
(902mm)
28"
(711mm)
8"
(203mm)
24"
(610mm)
TOWN SQUARE
®
CLASSIC CADDIE with
24" PEDESTAL TOP
TOWN SQUARE
®
CLASSIC CADDIE with
27" PEDESTAL TOP
Revised 2/08
-
1
-
2
American Standard 0790.004 24 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard Townsend 0555.401 User manual
-
American Standard Williamsburg Pedestal Lavatory 0555.400 User manual
-
-
-
-
-
-
-
-
