Styletto 00017 Installation guide

41!St&Charles,!Beloeil,!Qc,!Canada!!

1&800&363&9396!

www.styletto.com!

Styletto Paint Caddie painting set instructions.

1- Find your Paint Caddie roller tray, this unit comes complete with no

assembly required.

2- Unfolding the handle: Pull apart and extend the handle as outlined in the

following 1-2-3 illustrations.

1 2 3

3- Install the clear tray liner to make cleaning easier. Your Paint Caddie® can

be used without a tray liner

4- Slip Roller cover onto roller cage

5- Thread the painting pole into the handle of the roller cage

6- Unlock the telescoping painting pole by twisting the outer tube

counterclockwise while holding the inner tube firmly. Extend the pole to

the desired length. Lock in place by twisting the outer tube clockwise while

still holding the inner tube firmly.

7- Pour paint in the paint caddie reservoir to desired level while not

overfilling. Maximum capacity is 62oz. You are now ready to paint.

8- You can move your Paint Caddie® around by holding the extended handle

and lifting up, the center of gravity remains centered.

9- Hang your brushes on either of the two brush hooks molded at the top of

the green archway in the handle. Use the hole located in the paintbrush

handle to do so.

10- Use the reverse operation to close and store your Styletto® painting tools.

11- Read the cleaning and care instructions to get a long and useful service

life from your painting tools.

Download PDF