American Standard Lexington 0178.514 User manual

American Standard
Brand
American Standard
Model
Lexington 0178.514
Category
Mounting kits
Type
User manual

American Standard Lexington 0178.514 is a minimalistic styled pedestal sink made from vitreous china. It features a rear overflow, faucet ledge, and is supplied with a mounting kit. The pedestal sink is available in various colors, including white, bone, linen, silver, fawn beige, and black. It has a faucet ledge and can accommodate faucets with holes on 8" (203mm) centers. The bowl is 445mm (17-1/2") wide, 276mm (10-7/8") front to back, and 143mm (5-5/8") deep. The pedestal sink is compliant with ASME A112.19.

American Standard Lexington 0178.514 is a minimalistic styled pedestal sink made from vitreous china. It features a rear overflow, faucet ledge, and is supplied with a mounting kit. The pedestal sink is available in various colors, including white, bone, linen, silver, fawn beige, and black. It has a faucet ledge and can accommodate faucets with holes on 8" (203mm) centers. The bowl is 445mm (17-1/2") wide, 276mm (10-7/8") front to back, and 143mm (5-5/8") deep. The pedestal sink is compliant with ASME A112.19.

J5
© 2008 AS America Inc.
LEXINGTON™
PEDESTAL SINK
VITREOUS CHINA
LEXINGTON™ PEDESTAL SINK
• Minimalistic styled pedestal sink
• Made from vitreous china
• Rear overow
• Supplied with mounting kit
• Faucet ledge
Shown with 8871.902 Amarilis faucet with
Lexington handles (not included)
❏ 0178.514 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0178.536 Center Hole only
Nominal Dimensions:
616 x 464 x 867mm
(24-1/4" x 18-1/4" x 34-1/2")
Separate Components:
❏ 0178.027 Pedestal top-8" (203mm) centers
❏ 0178.152 Pedestal top-center hole only
❏ 730500-400 Pedestal only
Bowl sizes:
445mm (17-1/2") wide
276mm (10-7/8") front to back
143mm (5-5/8") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKE FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
OPEN TO
FLOOR
DRAIN
CHASE
876mm
(34-1/2)
FINISHED
WALL
203mm
(8)
464mm
(18-1/4)
197mm
(7-3/4)
PEDESTAL ANCHOR
SCREW HOLES
(2)10mm (3/8) DIA.
565mm
(22-1/4)
70mm
(2-3/4)
FINISHED
FLOOR
187mm
(7-3/8)
330mm
(13)
178mm
(7)
1-1/4 O.D.
WASTE
10mm
(3/8)
254mm
(10)
19mm (3/4) DIA.
HOLES FOR
ANCHOR BOLTS
203mm
(8)
610mm
(24-1/4)
102mm
(4)
*
286mm
(11-1/4)
*
178mm
(7)
SUPPLIES AS
REQUIRED
1-1/4 O.D.
TAILPIECE
Revised 2/08
  • Page 1 1

American Standard Lexington 0178.514 User manual

American Standard
Brand
American Standard
Model
Lexington 0178.514
Category
Mounting kits
Type
User manual

American Standard Lexington 0178.514 is a minimalistic styled pedestal sink made from vitreous china. It features a rear overflow, faucet ledge, and is supplied with a mounting kit. The pedestal sink is available in various colors, including white, bone, linen, silver, fawn beige, and black. It has a faucet ledge and can accommodate faucets with holes on 8" (203mm) centers. The bowl is 445mm (17-1/2") wide, 276mm (10-7/8") front to back, and 143mm (5-5/8") deep. The pedestal sink is compliant with ASME A112.19.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents