Pyle PDRIS06 Owner's manual

• Opentheboxandyouwillndthedeskisalreadyfullyassembled.Youonlyneedtoplaceitonatable.

• Thetableyouplaceitonshouldbewiderthan29",anddeeper

than26.5",asthebasewilloccupyanareaofapproximately29”

by215/8"initslowestposition.

• Thereisa"T"stylelockinghandleontheleftandrightunderthe

maindesktop,putyourhandsonleftandrightthenuseyournger

topulloutthelockingpinsotheanglebecomesadjustable.



• Adjusttheangletotheheightyouneedandreleasethelocking

pinstomakesurebothpinsarelocked.

• When you wantto increase the height,you to need pull the

desktopupalittle,andwhenyouwanttodescreasetheheight,

youneedtopressthedesktopdownalittle.

Normallytheuserwillonlyusethelowestandhighestpositions.

Pay attention: You must lock BOTH pins for safety.

SITTING & STANDING WORKING HEIGHT ADJUSTABLE WORKSTATION

QUICKUSERGUIDE

MODEL:PDRIS06

Thanks for choosing this sit-stand height adjustable desk/workstation

Although designed to be easy-to-use, carefully reading and following this guide will

help you to use this desk more easily.

LOCKINGHANDLE

TABLESURFACE

This manual is also suitable for

Download PDF