Unique Solutions
This section represents instances where customers have come to us with unusual challenges, challenges
that excited us and spurred us into a product design effort. Here you’ll see a variety of eclectic offerings
— original, beautifully designed, sturdy as Anthro-usual.
Solutions for very specific furniture challenges.
73
Top View
Side View,
Vertical Electric Adjustability
Side View,
Tilt Electric Adjustability
17.63"
28.5"
57.75"
23.5"
15.5"
46.75"
69.5"
28.5"
33"
48.5"
52.5"
72.5"
0˚ to 15˚
x"
Part #
Carl's Table
CT03SM/DG
Carl's Table
®
We named it “Carl’s Table” after our innovative Swedish partner who designed it to be more
than just adjustable in the way it tilts and elevates. Carl’s Table also has integrated lighting
that reads the density of your screen images and then automatically adapts for you.
Basic Carl's Table.
A. Carl’s Table was designed to make you as
comfortable as possible for as long as your day
lasts. But more importantly, it was designed to
reduce the risk of musculoskeletal stress like
Carpal Tunnel Syndrome and neck strain.
B. With Carl’s Table you can even completely
recline while looking at your monitors . . . perfect
for after lunch or late in the day. The main work
surface, monitors, lights and privacy panel can
be electrically tilted from 0° to 15°.
C, D. It’s vital to vary your position as much as
possible throughout the day. So Carl’s Table has
a motorized height adjustment from 28.5" to
48.5" so you can work sitting or standing with
just the touch of a button.
E, F, G. Carl’s Table’s integrated
lighting system makes it independent
of existing light in the room. It has a
sophisticated sensor on the control
panel that automatically increases
or dims the lights to maintain an
appropriate contrast ratio between
the image on the monitor and the
surrounding light. This dramatically
reduces eyestrain and fatigue. You
can also control the lighting yourself
by turning it to the manual setting.
H. A 28" tall panel shields you from
distractions behind and to the side of
your monitors so you can concentrate
better. Its curved shape and interior
fabric cover also absorbs sound and
reduces glare.
I. Carl’s Table is also ideal for non-medical
applications like video editing. In addition to all
the ergonomic comforts, Greg likes the ability
to “cocoon” himself within the privacy shield
and block outside light, noise and distractions.
Productivity:
Have you considered what
musculoskeletal injuries can
cost you in lost income and
productivity due to sick leave?
When you work for long
periods at a desk that does
not address the proper
positions of your body, you
put yourself at a great risk
for an expensive and
painful illness.
Ergonomics:
Orthopedic surgeons and
other work injury experts say
a 90° angle in the arms and
legs is the best when working
at a desk. Carl’s Table lets you
raise and lower your work surface
to a position that provides the
best support and comfort for you.
A. B.
D. C.
E.
H. I.
Footrest
Using this footrest helps
alleviate pressure on your
lower back. Mount it on the
left or right, and swing it out
of the way when not in use.
Monitor Arms
Mount up to four monitors
on your Carl’s Table. These
arms were chosen for their
purely horizontal motion so
you can pull your monitors
toward you without
any vertical drift.
Coffee Surface
As a non-tilting surface, the
Coffee Surface is a great home
for things you don’t want tilting
with the rest of the table – like
coffee cups or telephones. It
can be mounted left or right.
CPU Holder
The CPU Holder keeps your hard
drive out of the way and off the
floor. And it can be mounted
left or right. An optional second
CPU holder can be added to the
opposite side.
Power Strips
There are nine power outlets
in the back for CPUs, monitors
and other equipment. In the
front there are four power
outlets that you can easily
access for equipment like
PDAs and cell phone chargers.
Task Lights
In addition to the back light,
there are two LED task lights
on flexible goosenecks that
can be moved to where you
need light the most.
It's all part of the package.
Specifications
Carl's Table comes standard with two electrically controlled shelves (one monitor, one keyboard) and side shelf with height and tilt adjustments,
one back privacy shield, two height adjustable legs, one footrest, one background light, two LED task lights, two control panels, one CPU holder,
four monitor arms, one keypad surface, two power strips with 13 outlets and one 10 foot power cord with cable management sleeve.
´ Electrical/mechanical has One Year Warranty. All other components are Five Year Warranty.
´ Product ships partially assembled. A few standard tools are required to complete installation.
See page 94 for a complete list of accessories.
Dark Grey (DG)
Shelf Color
Metal Color
Silver Metallic (SM)
Light Grey
Keypad Color
Blue Slate
Privacy Panel Color
Changing the tilt when Carl's Table is in its lowest position will change the distance between the keyboard
shelf and the floor (x" dimension listed above). 0° = 28.5"h; 5° = 26.75"h; 10° = 24.75"h; 15° = 22.85"h
F.
G.
75
74
Unique Solutions
Basic, Super, and Deluxe Seating
Complete your ergonomic workstation with a really comfortable chair. While we
don’t make these chairs, we’ve tested them all and can say without hesitation
that they meet Anthro’s requirements for quality and comfort.
Seat Back
Height
Range
Arm Horizontal
Adjustment
Arm Vertical
Adjustment
Part #
Verté
21"w x 20"d 20"w x 29"h 18.25" - 22" 18.5" - 22" 6" - 10" from Seat 904BK
A. The seat angles forward and back, and the
padded T-arms adjust up and down. The back
features separate height and angle adjustments.
B. The seat back is taller than the “Basic” chair,
a separate control slides the seat pad front to
back, and the T-arms adjust up and down,
in and out.
C. Everything but the kitchen sink! All the
features of the “Super” chair, plus an even higher
seat back with a padded, height-adjustable head
rest. The padded T-arms adjust up and down,
in and out, and pivot to allow easy access.
D. Tommie relaxes at the Super Chair he
uses with his Elevate™ Wrap. Separate
levers control the seat tilt, height, and
horizontal position.
B. – Super ChairA. – Basic Chair C. – Deluxe Chair
Verté
®
Seating
If you spend a lot of time sitting, this is as good
as it gets. The Verté Chair combines the latest in
ergonomic seating with personalized comfort.
D.
Specifications
The Verte’ chair comes standard with a gel-filled full grain leather seat and back, eleven torsion spring-loaded bearing joints with brushed
aluminum back supports, three built-in levers for height and chair tilt, padded two-way adjustable head rest, adjustable and removable
padded T-arms and brushed aluminum star base with five smooth rolling 60mm chrome casters.
´ Supports 275 lbs. Meets CAL 117 and BIFM F-1-1978 Flammability Codes
´ The cylinder has a Lifetime Warranty, parts have a Fifteen Year Warranty and fabric has a Two Year Warranty.
´ Manufacturing lead time for the Verte’ Chair is 6-8 weeks.
´ Assembly required, socket set recommended.
Color
Black (BK)
Specifications
All chairs come standard with black fabric, vertical adjustable arms with soft pads, height range of 17" – 22" and a five-point 25" diameter
black resin base with 55mm casters.
´ Supports 300 lbs. Meets CAL 117 and BIFM F-1-1978 Flammability Codes.
´ The cylinder has a Lifetime Warranty, parts have a Fifteen Year Warranty and fabric has a Two Year Warranty.
´ Manufacturing lead time for the “Basic” and “Super” chairs is 2-3 business days. Lead time for the “Deluxe” chair is 10 business days.
´ Minimal assembly required.
Color
Black (BK)
Seat Back Height Range Part #
Basic
19.5"w x 18.5"d 19"w x 18.5"h 17" - 22" 901BK
Super
19.5"w x 18.5"d 19"w x 24"h 17" - 22" 902BK
Deluxe
20"w x 19.5"d 19.5"w x 33"h 17" - 22" 903BK
Features
A. Feel Inspired
Imagine settling into a chair that molds itself to
your spine’s unique shape, fitting and holding you
perfectly. That’s the idea behind this revolutionary
new Verté seating solution. It is an infinitely
ergonomic, visually striking new design that
uniquely balances form and function.
B. Develop Yourself
This patented Verté chair has been in development
for over 10 years by a team of over 100 engineers,
designers, doctors and manufacturers. From the
start, it was intended to be more than just a
stylish, supremely comfortable office chair. As a
true orthopedic device, it’s infinite adjustability
and flexible, dual-vertebrae support
system helps to ease pain and improves
posture, actually teaching your spine
to relax while seated.
C. Be Ergonomic
The striking shape of the sturdy Verté
chair is built on 11 torsion spring-loaded
bearing joints that take an exact spine
impression, which can be locked in
place at the touch of a lever. Just lean
back into the soft, highly adjustable
headrest pillow and program your ideal
posture with a single touch of the
patented Revo™ control. Over time,
“muscle memory” takes over, and
your posture improves naturally and
permanently, improving circulation
and your entire back structure.
A.
B. C.
76
77
Unique Solutions
Unique Solutions
eNook
®
Here’s a gas station for your gadgets and a work space for you. This very multi-talented
workstation has channels for you to plug in and charge all your gear. Flip it up to store
your laptop and lock it out of sight. Or flip it down for a handy desk.
A. Ken put his eNook (shown in Maple
Wood and Garnet fabric) in the entry so
it’s convenient for his family to drop off
and pick up their electronics, get their
mail and leave messages for each
other on the laptop.
´ Shelf (two), Part #: 336SM
B. Ruffles likes the way his new
eNook fits in with the bright family
room, right next to his couch. However,
he’s concerned that it was mounted
way too high. His White eNook with
Sage fabric has:
´ Shelf (two), Part #: 336SM
C. With three wood colors to choose
from, eNook compliments the décor
and adds a touch of contemporary
design to any home. Shown here with
Cherry Wood and Gold Star fabric.
´ Shelf (two), Part #: 336SM
D. Kara uses her eNook as a Patient
Information Station. It’s so easy to
enter the latest data, then flip it up,
lock it and it’s out of the way.
Basic eNook opened, with Cherry Wood
and Blue Mica fabric…
Basic eNook closed, with Cherry Wood.
A.
B.
D.
C.
7.25"
30"
16.5"
35.25"
22.32"
Front Uni
t
Fabric PanelMetal Frame
25.5"
15"
Part #*
eNook
EN3616zz/xx
*
Replace zz in part number with
two-letter fabric color code.
Replace xx in part number with
two-letter laminate color code.
7.25"
30"
16.5"
35.25"
22.32"
Front Uni
t
Fabric PanelMetal Frame
25.5"
15"
Specifications
eNook comes with one back metal frame, one front frame with brushed aluminum, a fabric covered back panel, two locking
membrane-pressed shelves, one power strip, and six cable clips. eNook's internal dimensions are 30.2"w x 5.1"d x 15.2"h.
´ The main shelf can hold 30 lbs. eNook can hold 45 lbs. total.
´ eNook has a Five Year Warranty. Patent pending.
´ Product ships unassembled, with all the necessary tools.
See page 94 for a complete list of accessories.
Fabric Colors (zz)
Metal Color
Silver Metallic (SM)
Wood Colors (xx)
Cherry (CS)
Maple (MS)
White (WS)
Features
E. Quality in the Details
eNook’s shelf opens gently and safely with
a damper. The sides of eNook are aluminum
extrusion with a brushed texture and anodized
with a stainless steel finish.
F, G. Keep it Neat
The bottom locking door conceals a six-outlet
power strip and plenty of room for cords and
cables. There are openings in the back panel
if you want to mount an electrical outlet or
internet connection behind your eNook. The
shelves come with clips to keep cords and
cables organized.
H. Lock it Up
One key fits both the flip-down desktop
and the cord and cable area.
I. Stay Cool
The metal frame is vented on all four sides
to keep it cool on the inside.
J, K. Add Shelves
The Accessory Shelf is sold separately
to hold all your extra gadgets. Buy as
many as four for your electronic devices.
Remember to leave room to store your
laptop. Each shelf is: 13"w x 5.5"h x 5"d.
E.
F. G. H. I. J. K.
Gold Star (TG)
Garnet (MG)
Blue Mica (TB)
Sage (AS)
79
78
Unique Solutions
26.5"
21"
29"
37.5"
to
27"
Adjustable Laptop Cart
Wouldn’t it be great to have a little height-adjustable table for your laptop that you could
scoot around wherever you need it? Our new Adjustable Laptop Cart gives you plenty of
room for your laptop, mouse or paper, but is small enough to never be in the way!
*
Replace xx in part number with two-letter
laminate color code.
A. Ruffles awaits the return of his
owner near the Adjustable Laptop Cart
in Bluestone. Use the solid casters to
move the Cart where you work most
comfortably, on a couch, chair or bed.
B. Jeff adds a Back Shelf to give him
room to spread out. The Shelf features
a convenient pass-through for cable
management. Use the Lower Shelf to
hold a printer or other small items.
´ Shelf – Back, Part #: 591SM/BS
´ Shelf – Lower, Part #: 592SM/BS
C. With a quick squeeze of the
lever, Susan adjusts her Laptop Cart
in Fog to a stand-up height
(or any height in-between).
C.
B.
A.
Part #*
Adjustable Laptop Cart
ALCSM/xx
Specifications
The Adjustable Laptop Cart comes standard with one height-adjustable top shelf,
trunk, gas cylinder with adjustment lever, black plastic star base and five 3" soft rubber
casters (two locking).
´ Warning: Not recommended for commercial applications that require heavy mobility
(hospitals, schools, etc). Need more mobility, see the POC Cart on page 86.
´ Holds up to 150 lbs.
´ The Cart has a Lifetime Warranty. The gas cylinder has a Five Year Warranty.
´ Product ships unassembled, with all the necessary tools.
See page 95 for a complete list of accessories.
Bluestone (BS)
Fog (FG)
Black (BK)
Laminate Colors (xx)
Metal Color
Silver Metallic (SM)
Basic Adjustable
Laptop Cart in
Bluestone…
with the optional
Back Shelf in Black…
finished with a
Lower Back Shelf
in Black.
*
Replace zz in part number with
two-letter metal color code.
SpacePal
Part #*
Short
SPAzz/BC
Tall
SPBzz/BC
29"
49"
19"
19"
26"
23"
32"
26"
A. With enough room to hold your
computer and other peripherals,
the compact Short SpacePal melds
easily into corners to maximize the
minimum space you have. This
SpacePal is shown with:
´ CPU SideRack with Caster, Part #: 564RU
´ Keyboard Caddy, Part #: 432BC
B. Contemporary and space-saving,
this Silver Metallic Tall SpacePal is a
perfect complement for your home
office. Use the upper shelf to hold
your printer and the bottom shelf
for storage. Includes:
´ Shelf – Additional (below),
Part #: 102SM/BC
´ Document Tray, Part #: DTSM
´ Mouse Shelf – Clamp-on, Part #: CMSSM
C. Personalize your SpacePal with:
´ CPU SideRack with Caster, Part #: 564BL
´ Document Tray, Part #: DTIN
´ Mouse Shelf – Clamp-on, Part #: CMSSA
´ Shelf – Additional (below),
Part #: 102SM/BC
´ Keyboard Caddy, Part #: 432BC
D. If his career as a video game
player doesn’t work out, Erik can
fall back on his education and open
his school books. An Additional Shelf
below gives him a place to store
his backpack for whenever the
mood hits him. Shown with:
´ Keyboard Caddy, Part #: 432BC
´ Shelf – Additional (below),
Part #: 102BL/BC
Basic SpacePal
in Ruby…
with optional CPU SideRack
with Caster and Mouse
Shelf – Clamp on.
A.
C.
B.
Specifications
The Short SpacePal comes standard with one main shelf, four legs with holes in
1" increments for variable shelf height, four shelf brackets, two base tubes, a rear
bracket and four 2 3/8" soft rubber casters (front two locking).
The Tall SpacePal comes standard with two shelves, 20" Extension Tubes, four legs with
holes in 1" increments for variable shelf height, eight shelf brackets, two base tubes,
a rear bracket and four 2 3/8" soft rubber casters (front two locking).
´ Holds up to 150 lbs.
´ Product ships unassembled, with all the necessary tools.
See page 95 for a complete list of accessories.
Blanc (BC)
Laminate Color
Metal Colors (zz)
Blueberry (BL)
Grape (GP)
Graphite Blue (GB)
Indigo (IN)
Ruby (RU)
Sage (SA)
Silver (SM)
Tangerine (TN)
SpacePal
The short and tall SpacePals come in a variety of great colors! With its
19" rear width and 32" front width, it fits in your extra-small areas and
tight corners. Fun accessories add pizzazz while organizing your gear.
D.
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
80
81
Unique Solutions
Unique Solutions
Trolley
When you need to move equipment through tight spaces,
this Cart is just the ticket. It’s strong, versatile, and moves
easily and smoothly wherever you need to go.
D.
A.
A. With the cantilevered shelf of the Trolley,
Barbara scoots right next to the bed so she can
input the patient’s information into her laptop.
Shown here with:
´ Shelf – Base, Part #: 648SM
B. Lanny added a Keyboard and Mouse Caddy to
her Trolley so she can retract her keyboard when
she’s on the move. Her Cart includes:
´ Shelf – Base, Part #: 648SM
´ Flat Panel Monitor Mount – Single, Part #: 615SM
´ Keyboard and Mouse Caddy – B, Part #: UKMCBK
C. Jose uses the tilt feature of the Flat Panel
Monitor Mount to find the right monitor angle
for him. He also uses extra Shelves and Drawers
to hold everything he needs without increasing
the small footprint of the Cart. He’s added:
´ Flat Panel Monitor Mount – Single,
Part #: 615SM
´ Keyboard and Mouse Caddy – B,
Part #: UKMCLBK
´ Shelf – Additional Wood,
Part #: 427SM/LG
´ Drawer – Small 3", Part #: 413SM
´ Shelf – Base, Part #: 648SM
D. Mobile Trolleys keep up in any
fast-paced environment. Kim uses a
Trolley to hold her monitoring system.
Large 5" directional casters roll easily
in and out of elevators and around
tight corners. She's added:
´ Drawer – Small 3", Part #: 413SM
´ Flat Panel Monitor Mount – Single,
Part #: 615SM
´ Shelf – Additional Metal, Part #: 654SM
´ Shelf – Base, Part #: 648SM
B.
C.
Basic Trolley…
completed with optional
Drawer – 3", Tray, and Base Shelf.
Specifications
The Trolley comes standard with one top shelf (1" industrial grade particle board),
handle, two legs, cable wrap, two base legs and four 5" casters
(two directional locking and two total locking).
´ Holds up to 150 lbs.
´ Lifetime Warranty on the Trolley.
´ Product ships unassembled, with all the necessary tools.
See page 96 for a complete list of accessories.
Light Grey (LG)
Laminate Color
Metal Color
Silver Metallic (SM)
Part #
Trolley
TR18SM/LG
38"
29"
21.5"
18.5"
19"
Protect cords and keep them
out of the way by routing them
down the hollow leg channels
and around the cable wrap.
Power Supply Cart
Meet the Power Supply Cart, the Cart for retail, warehouse and inventory
management. It’s a mobile battery solution that gives your hand-held
scanners, printers and other equipment plenty of juice.
A. Charge your Power Supply Cart quickly. Roll the
Cart to your backroom or near an outlet and get
charged overnight. Draws up to 5 amps of power
from the outlet.
B. Marcus moves his label printer around the ware-
house with a Power Supply Cart. The shelves below
give him extra space to hold paper and other items.
A. B.
C. Without being tethered to a wall outlet,
Susan can move freely on the sales floor when
she needs to do pricing and markdowns.
D. Susan moves the Power Supply Cart around
easily on large 5" directional solid rubber casters.
These casters are a breeze to roll around tight
corners and go over uneven or bumpy surfaces.
Specifications
The Power Supply Cart comes standard with three shelves (two height-adjustable shelves
made of industrial grade laminated particle board, one metal shelf), one metal center
column with four 120V power outlets, power meter, two cable wraps, power switch, one
54 amp/hour power pack, and four 5" soft rubber casters (two total locking and two
directional locking).
The Cart can power a laptop PC for approximately 8 hours and a desktop PC with a
flat panel monitor for approximately 4 hours. It recharges overnight.
´ Holds up to 100 lbs.
´ The Power Supply Cart provides quasi sine wave power to your hardware. Some hardware
may require pure sine wave power and will not work with Anthro’s Power Supply Cart.
Please check with your hardware manufacturer if you are unsure.
´ Lifetime Warranty on the Cart and One Year on the power system. The cord, plug and
batteries are not warranted.
´ Product ships assembled.
See page 96 for a complete list of accessories.
Light Grey (LG)
Laminate Color (xx)
Metal Color
Silver Metallic (SM)
Part #
Power Supply Cart
TS2454SM/LG5
40"
23"
24"
Basic Power Supply Cart.
C.
D.
82
83
Unique Solutions
Unique Solutions
B
A 22.5"
Convoi Basic Frame
Width “A” Height “B” Part #
24"w Standard
24.25" 29.5" BU24STSM
24"w Tall
24.25" 35.5" BU24TLSM
30"w Standard
30.25" 29.5" BU30STSM
30"w Tall
30.25" 35.5" BU30TLSM
Convoi
TM
Convoi gives a whole new meaning to “configurable”. There is no basic model to start with —
you are the designer from the floor up. Choose the frame, the types of shelves, your storage
solutions and then accessorize. And don’t underestimate this one. It holds up to 500 lbs!
Specifications
Convoi comes with two extruded aluminum leg columns with integrated cable management, two base tubes, two cast feet and
four 5" casters (two directional locking and two total locking).
´ Holds up to 500 lbs. total, 100 lbs. per shelf.
´ Lifetime Warranty on the Convoi.
´ Product ships unassembled, with all the necessary tools.
See page 98 for a complete list of accessories.
Blanc Laminate
Accent Colors (BF)
Metal Color
Silver Metallic (SM)
A. Choose from two heights of base frames
(29.5"h and 35.5"h) to configure Convoi for
stand-up use. Use the roomy aluminum
extruded legs to route your cords and
cables inside. This 24" wide station includes:
´ Keyboard and Mouse Caddy – A , Part #: 149SM
´ Flat Panel Monitor Mount – Single, Part #: 615SM
´ End Cap, Part #: BUEC
´ Handle, Part #: BUHD
´ Shelf – Metal, Part #: 24MSSM
´ Shelf – Base Storage Shelf, Part #: 24IBSM
´ Shelf – Wood, Part #: 24WSSM/BF
B. Convoi is strong enough to handle
a heavy cash register easily and move it
around smoothly on large 5" locking casters.
´ Shelf – Cap, Part #: 30CSSM/BF
´ Shelf – Wood, Part #: 30WSSM/BF
´ Shelf – Base Storage, Part #: 301BSM
C. Designed with a cast aluminum
base, Convoi is quite the weight lifter,
holding up to 500 lbs. of heavy
instruments. Shown with:
´ Shelf – Cap, Part #: 24CSSM/BF
D. Even your most sensitive instruments,
like the oscilloscope, will stay put and
rest easy on your Convoi. Mount the
shelves at any height you want on the
legs. 30" wide Convoi, configured with:
´ Shelf – Tilt, Part #: 30MTSM
´ Shelf – Metal, Part #: 30MSSM
´ End Cap, Part #: BUEC
B. C. D.
A.
E. One of the many healthcare uses
of Convoi is as a medication cart.
Drawers include anti-tip mechanics
and ball bearing glides, making it a
pleasure to use. Shown with:
´ End Cap, Part #: BUEC
´ Drawer – 4-Drawer Large Enclosure,
Part #: 2422SM/BF
´ Shelf – Base Storage, Part #: 24IBSM
F. The stable frame of Convoi keeps
even the most sensitive equipment
consistently reporting accurate data.
The Metal Bin is a safe place to store
items that might roll off the Cart. This
24" wide Convoi includes:
´ Shelf – Cap, Part #: 24CSSM/BF
´ Handle, Part #: BUHD
´ Paper Tray, Part #: 325SM
´ Shelf – Metal Bin, Part #: 24MBSM
Easy to Design in 4 Steps
Step One:
Start with a
firm foundation
Choose a Basic Frame.
Step Two:
Shelve the project
Add any or all the shelves
you want.
Step Three:
Keep it out of sight
Consider storage options to
keep organized and tidy.
Step Four:
Finish with flair
Add accessories to make
the Convoi perfect.
E.
Extruded aluminum
legs to route cords.
Strong, sturdy base.
Move with ease.
F.
Fog Edge Band
85
84
Unique Solutions
B. Todd uses the POC Cart as a single-monitor
PACS station in the OR. He can swing the
Mouse Shelf out when he needs it and push
it underneath the POC shelf when he’s done.
Todd has added:
´ Flat Panel Monitor Mount – Single,
Part #: 615SM
´ Mouse Shelf – Swing out, Part #: 687BK
´ Shelf – Large Equipment, Part #: 623SM
´ Shelf – Small Equipment, Part #: 621SM
C. Put your POC Cart accessories where you
need them. Hook your accessory over knobs,
which attach to the holes placed every two
inches along the trunk. Abood uses:
´ Bin, Part #: 635SM
´ Shelf – Small Equipment, Part #: 621SM
D. Stephen uses the POC Cart to move his
presentation equipment around. With a
smooth handle and solid 4" casters, the
POC is ideal for high mobility applications.
Stephen’s POC Cart includes:
´ Bin, Part #: 635SM
E. This clinician monitors her patient’s balance
and gait performance using Neurocom’s
computer system. The system components
fit nicely on the POC Cart, which includes:
´ Shelf – Small Equipment, Part #: 621SM
´ Shelf – Large Equipment (two), Part #: 623SM
F. Weave your cables inside the trunk of the
POC Cart to prevent them from getting snagged.
The door attaches with two knobs.
B. C. D.
F.
E.
POC Cart
Height-adjustable and compact in size, the POC Cart can be
used either sitting down or standing up. Simply adjust the lever
and the height range changes from 30" to 40"!
A. With its small footprint and ability to
adjust to multiple heights for various users,
the POC Cart is a favorite in medical facilities.
´ Flat Panel Monitor Mount – Dual, Part #: 617SM
´ Mouse Shelf – Swing-out, Part #: 687BK
´ Shelf – Small Equipment, Part #: 621SM
´ Shelf – Large Equipment, Part #: 623SM
Basic POC Cart…
with two Bins for storage…
completed with a Large
Equipment Shelf.
A.
Specifications
The POC Cart comes standard with one height-adjustable shelf, handle,
gas cylinder with height adjustment lever, trunk with integrated cable
management, base and five 4" casters (2 locking).
´ Holds up to 150 lbs.
´ The Cart has a Lifetime Warranty. The gas cylinder has a Five Year Warranty.
´ Product ships unassembled, with all the necessary tools.
See page 100 for a complete list of accessories.
Light Grey (LG)
Laminate Color
Metal Color
Silver Metallic (SM)
Part #
POC Cart
POCCSM/LG
42"
to
31.75"
20"
20"
27.75"
25.5"
87
86
Unique Solutions
6
7
1
2
3
4
8
9
10
11
5
9
10
11
Latch
The T-handle is recessed so
it doesn’t stick out and catch
on door frames and corners.
Cable Wrap
An exterior shark fin cable
wrap keeps your 14 foot
exterior power cable orga-
nized when not in use.
External Outlets
Two external outlets for
peripherals and LAN offer
you the convenience of using
a printer, projector or other
hardware with your Cart.
Internal Outlets
Built-in power with electrical
outlets in each storage bay
allow you to charge your
laptops or tablet computers
without having to use unsafe
daisy-chained power strips.
Shelves are 3" apart.
5
6
7
8
Handle
Large handles give you
controlled steering down
long hallways, around
tight corners and over
uneven surfaces.
Casters
Heavy-duty, solid
rubber, 5" casters (two total
locking and two directional
locking) easily move your
laptops or tablet computers
along. You can upgrade to
8" pneumatic casters.
Vents
Vented doors and side panels
allow air to circulate around
your equipment.
Lock
Reinforced steel doors have a
two point keyed locking sys-
tem that grabs and secures
both the bottom and side of
the Cart to keep your laptops
or tablet computers safe.
1
2
3
4
Charging
Rear placement of the outlets
means you can keep your
adapters plugged in at all
times without having to
unplug them when you load
and unload your laptops or
tablet computers.
Cable Management
To manage your cables and
adapters more easily, each
storage bay shelf has a slot to
be used with supplied velcro
cable ties, so all cables can be
velcroed into tiny bundles.
Power Switching
Anthro’s 30 Unit model is
uniquely equipped with a
built-in timing device that
automatically switches the
AC power supply from one
side of the Cart to the other
to prevent overload.
Unique Solutions
Laptop Storage Cart
Anthro’s newest generation of Laptop Storage Carts includes many exciting design and
safety features. Keep your children safe with a Laptop Storage Cart that is UL-listed both
inside and out! Choose between two models that best fit your classroom.
A. Jeff uses the 30 Unit model to charge
and move laptops to his larger classes
and the 20 Unit for his smaller classes.
B. Load and get access to your laptops or
tablet computers from both sides of the
20 Unit Cart.
C. Thom is delighted that the Laptop
Storage Cart comes already assembled.
He simply needs to unbox it and he’s
ready to go!
Design flair and customer convenience
helped Anthro’s Laptop Storage Carts
win The Most Innovative Product
award in 2002 at the Best of
NeoCon Competition.
Anthro’s Carts have been UL tested and
listed on both the electrical and cabinets.
This means that if a short occurs, our
cabinets won’t become electrically hot
and shock you or your students.
A.
B. C.
Specifications
20 Unit Cart: Comes standard with two reinforced lockable doors, two side panels, one top and bottom panel, eighteen shelves, exterior
cable wrap, interior electrical outlet channel, two exterior power receptacles, one exterior data input connection and four 5" casters
(two directional casters and two locking). Each storage bay is 15.5"w x 12"d x 3"h.
30 Unit Cart: Comes standard with four reinforced lockable doors, two side panels, one top and bottom panel, twenty-eight shelves,
exterior cable wrap, interior electrical outlet channel, two exterior power receptacles, one exterior data input connection and
four 5" casters (two directional casters and two locking casters). Each storage bay is 16"w x 12"d x 3"h.
´ The Laptop Storage Cart has a Lifetime Warranty on the cabinet and a One Year on the electrical. The cord is not covered under Warranty.
´ Product ships assembled.
White (WH)
Metal Color
Silver Metallic (SM)
Base Tube, Handle
and Shelf Color
Part #
20 Unit
LTSC20WH/SM
Part #
30 Unit
LTSC30WH/SM
20 Unit
30 Unit
42.5"
36.5"
29.5"
29.5"
45.5"
38"
25.5"
1
8.5"
20 Unit
30 Unit
42.5"
36.5"
29.5"
29.5"
45.5"
38"
25.5"
1
8.5"
89
88
Unique Solutions
C. Greg locks up his test and measure-
ment equipment in the Security Cart.
Use the top shelf to hold your laptop,
monitor or other hardware. Greg’s
Security Cart includes:
´ Handle, Part #: EHSM
D. Scott enjoys the best of both worlds.
He uses the top surface of the 30" wide
Security Cart as a computer station,
and still has the option of storing
sensitive equipment in the lockable
cabinet below. Scott has added:
´ Flat Panel Monitor Arm, Part #: LCDBK
´ Drawer , Part #: EDW30SM
´ Shelf – Inside Metal, Part #: EMS30SM
E. Store your loose items in this
roomy metal Drawer. Pulls out easily
on smooth ball bearing glides. See
page 101 for more information.
F. Add this curved 16" wide Handle
to move the Cart where you need it.
See page 101 for more information.
C.
D.
E.
F.
Security Cart
Enclosed and mobile, the Security Cart protects equipment, documents and peripherals
on the go! Ventilated door, back and side panels provide air flow to keep equipment cool.
The locking metal door hides the contents, safe from busy hands and dust.
Basic 24" wide Security Cart…
with optional Drawer
and Handle…
finished off with a Flat Panel
Monitor Arm, and Keyboard
and Mouse Caddy.
A. Use the locking Security Cart to hold all of your
presentation equipment. Pull out your keyboard
and mouse when you need it, slide it back in when
you’re through. Security Cart shown with:
´ Shelf – Upper, Part #: EAS24SM/LG
´ Extension Tubes – 12", Part #: 243SM
´ Keyboard and Mouse Caddy – B, Part #: UKMCBK
´ Shelf – Inside Metal, Part #: EMS24SM
B. The door’s strong 2-point lock engages
the bottom and side of the Cart to keep
equipment safe and secure.
B.
A.
Specifications
The Security Cart comes standard with one top shelf, four vertical tubes, two side panels, one rear panel with top cord pass-through,
one metal door with two-point lock, one bottom shelf and four plate-mounted casters (two locking). The Security Cart is available
with 5" plate-mounted directional casters. Two of the casters are locking and two are non-locking.
´ The Security Cart is covered by a Lifetime Warranty.
´ Product ships unassembled, with all the necessary tools.
See page 101 for a complete list of accessories.
Color Combo (SM/FG)
Color Combo (BK/BK)
Black Laminate
Caster Width “A” Width “B” Height “C” Part #*
24"w Security Cart
5" 24" 22" 37.5" SEC24zz/xx5
30"w Security Cart
5" 30" 27.8" 37.5" SEC30zz/xx5
Black Metal
Fog Laminate
Silver Metal
*
Replace zz/xx in part number with color combo code.
A
B
22"
19.5"
Interior
Height
27.5"
Exterior
Height
C
91
90
Unique Solutions
Rack System
Flexibility is the key to the Anthro Rack System. You can mount both
standard threaded rail mount and Dell/HP style mounts all in one rack.
Now that’s convenience!
Building Your Rack
Before you place an order, you’ll need
to identify the specific equipment,
by manufacturer, that will go in your
Rack System. If you are unfamiliar
with rack systems, here are some
simple steps in configuring ours:
Step One: The Basic Frame
You begin with the Basic Frame. First decide how many Units of rack you’ll need. Your rack
mountable equipment is measured in Units (a Rack Unit is 1.75" high). Figure out how many
Units of equipment you have. You also might want extra Units to grow. Add all those Units up,
and that will determine which Anthro Basic Frame to consider. Anthro offers 12 Unit, 16 Unit,
24 Unit and 36 Unit models.
Step Two: Adding Tapped Rails to the Front (Required)
Equipment is mounted to the Basic Frame using Tapped Rails. You attach the rails to the
Frame, and then your equipment is attached to the rails. The industry uses two standards of
rack mountable equipment: those that use threaded rail mounts which have standard 10-32
screw holes; and Dell/HP style mounts that have larger square holes instead of screw holes.
You can use both standards on an Anthro Rack System. Choose Tapped Rails that are specific
to your equipment from our accessory list starting on page 103.
Step Three: Choosing Tapped Rails for the Back
Some rack mountable equipment requires support in the rear. Anthro’s floating panels, which
come standard on the sides of the Basic Frame, mount on the front or the back of the frame
so that you can support equipment of different depths. Choose Tapped Rails for the rear of
your equipment from our Tapped Rail offerings. Some Anthro Rack accessories require back
Tapped Rails for sturdy mounting (see page 102).
Step Four: Add Accessories to Complete your Rack System
See all your choices on page 93.
Basic Frames
Specifications
The Rack System comes standard with one metal support frame, two Floating Panels (1" wide on the 12 Unit, 9" wide with
cable management on the 16, 24 and 36 Units) and four self-leveling glides.
´ 1 Rack Unit = 1.75"h x 19"w.
´ 2 sets of Tapped Rails are required
if using Shelves or the Drawer.
´ Orders ship in 5-7 business days.
´ Rack has a Lifetime Warranty.
´ Product ships unassembled,
with all the necessary tools.
See page 102 for a complete list of accessories.
Metal Colors (zz)
Black (BK)
Silver (SM)
Overall Height
with Glides
Overall Height
with 5" Casters
Mountable
Height
Depth Part #*
12 Unit
27" 32" 21" 24.3" R1224zz
27" 32" 21" 30.4" R1230zz
16 Unit
34" 39" 28" 24.3" R1624zz
34" 39" 28" 30.4" R1630zz
24 Unit
48" 53" 42" 24.3" R2424zz
48" 53" 42" 30.4" R2430zz
36 Unit
69" 74" 63" 24.3" R3624zz
69" 74" 63" 30.4" R3630zz
Overall
Height
Mountable
Height
26"
*
Replace zz in part number with two-letter metal color code.
Practical Design
Open design gives you plenty of air flow.
Adjustable
Floating Panels mount forward and back. Attach
Tapped Rails (sold separately) to the Floating
Panels to support the back of your equipment
– even equipment of different depths.
Flexible
Maintain different standards (threaded rail
mount, hook mount style and stand-alone
equipment) all in one place.
Several Sizes
Choose from four heights (12 Unit, 16 Unit, 24
Unit, and 36 Unit) and two depths (24" and 30").
Two Finishes
Choose Black or Silver Metallic finish.
Optional Casters
Add 5" Casters to move your Rack System
wherever you need it.
Cable Management
Keep your cords organized and route cables
inside the roomy Floating Panel.
Warranty
Lifetime Warranty for any manufacturing defect.
Features
Accessories: Make it
Easy on Yourself
A.
D.
C.
E.
B.
I. J. K. L.
A. Door: Lock up your equipment safely.
Heavy-duty lock keeps equipment secure.
B. Drawer – Large: Store odds and ends.
Pulls out on 22" full-extension glides.
C. Shelf – Pull-out: Store equipment or
keyboards on 22" full-extension glides to
prevent overload.
D. Panel – Back: Protect your equipment.
Cord grommets route cables.
E. Panel – Side: Ventilate and conceal
your equipment to keep it safe.
F. Panel – Top: Solid steel top for added
security and storage.
G. Panel – Bottom: Base shelf for storage or
to protect equipment from damage.
H. Shelf – Fixed: Add free-standing
equipment to complete your Rack System.
I. Handle: Easily steer your Rack System
just where you need it.
J. Face Plates: Cover open areas providing
a clean, finished look.
K. Casters – 5": Move your Rack System
just where you need it.
L. Tapped Rails: Support threaded rail mount
or Dell/HP-mount equipment.
F.
G. H.
93
92
Unique Solutions
1. Carl's Table – CPU Holder 1. eNook – Shelves 6. Adjustable Laptop Cart –
Shelves
2. Adjustable Laptop Cart –
Document Stand
1. Adjustable Laptop Cart –
Chairs
Add a second CPU to your Carl's Table with this metal bracket.
Mounts underneath a shelf. CPU rests in sturdy steel carriage.
Adjusts to hold CPUs 7" – 10" wide and 12" – 22" tall. Overall
width is 3.5" plus the width of your CPU. Height is 4.5" plus
the height of your CPU. Shown on pages 74 and 75.
Color: Silver Metallic (SM)
Part #: 367SM
Metal shelves to hold your cell phones,
PDAs, digital cameras and other small
gadgets. Includes cord clips to manage your
cables and connect shelves together. eNook
can hold up to four shelves. Remember to
leave room to store your laptop. Each shelf
is 13"w x 5 1/2"h x 5"d and holds up to 5 lbs.
Shown on pages 18, 78 and 79.
Color: Silver Metallic (SM)
Part #: 336SM
A. Shelf – Back
Give yourself more room to spread out by attaching this
Back Shelf to the Cart’s top shelf. When installed, creates
a 26" x 25.5" top surface. Route cables through opening
slit between shelves to keep everything tidy.
Shown on page 80.
Color: Silver Metallic (SM) metal with Black (BK),
Bluestone (BS) or Fog (FG) laminate
Part #: 591SM/BK, 591SM/BS, 591SM/FG
B. Shelf – Lower
Put your small printer or other equipment on this
Lower Shelf. Quickly mounts anywhere along the
trunk with just a few screws. Shown on page 80.
Color: Silver Metallic (SM) metal with Black (BK),
Bluestone (BS) or Fog (FG) laminate
Part #: 592SM/BK, 592SM/BS, 592SM/FG
B. Super Chair
The Super chair moves forward and backward. The seat
back is taller than the “Basic” chair, a separate control
slides the seat pad front to back, includes separate angle
adjustment and the T-arms adjust up and down, in and
out. Supports 300 lbs. Shown on pages 25, 27, 29 and 76.
Color: Black (BK)
Part #: 902BK
Compatibility: All Anthro Families
C. Deluxe Chair
All the features of the “Super” chair, plus an even higher
seat back with a padded, height-adjustable head rest. The
padded T-arms adjust up and down, in and out, and pivot
to allow easy access. Supports 300 lbs. Shown on
pages 28, 70 and 76.
Color: Black (BK)
Part #: 903BK
Compatibility: All Anthro Families
D. Verté
®
Chair
This is state-of-the-art ergonomics in seating. A series of
11 torsion spring-loaded bearing joints conform to your
exact spine impression, which you can then lock into place.
This chair is also about comfort. Three built-in levers control
the chair’s overall height and tilt. With the gel-filled full
grain leather seat, padded two-way adjustable head rest,
and adjustable and removeable padded T-arms, you won’t
want to get up. Supports 275 lbs. Shown on pages 33 and 77.
Color: Black (BK)
Part #: 904BK
Compatibility: All Anthro Families
2. Carl's Table – Chairs
A. Basic Chair
The seat angles forward and backward, and the padded
T-arms adjust up and down. The back features separate
height and angle adjustments. Supports 300 lbs.
Shown on pages 26 and 76.
Color: Black (BK)
Part #: 901BK
Compatibility: All Anthro Families
Raises your documents and manuals to a preferred viewing
height. Comes with 10" gooseneck so you can find a position
that works for you. Lip is 2" deep to securely hold your items.
Clamps onto the edge of your Cart with a C-clamp. Measures
14.25"w x 11"h. Shown on pages 24, 34 and 51.
Color: Black (BK), Silver Metallic (SM)
Part #: 440BK, 440SM
3. Adjustable Laptop Cart –
Equipment Hold-down
Secure your equipment to a shelf with this handy kit.
First, attach an adhesive-backed buckle to one side of
your equipment and another to the shelf, then feed the
included strap through the buckles to secure. Kit includes
four adhesive-backed buckles, two 8" Polypropylene straps
and two alcohol pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
4. Adjustable Laptop Cart –
Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart with this
metal swivel-head mount. Choose single-monitor or
dual-monitor design. The single-monitor version supports
up to 22 lbs. The dual-monitor version supports a total of
22 lbs. and two monitors up to 17" across. The heavy-duty
dual-monitor version supports up to two monitors
(20" across) and a total of 44 lbs. It is 22" wide with
mounting points in 1" increments. The Mount elevates
the center of the monitor 13" above the shelf. Install by
drilling through the shelf and secure with four bolts.
Conforms to VESA 75mm and 100mm mounting
standards. Shown on pages 10, 19 and 86.
Color: Black (BK), Silver Metallic (SM)
Part #: Single – 615BK, 615SM
Dual – 617BK, 617SM
Heavy-Duty Dual – 627BK, 627SM
5. Adjustable Laptop Cart –
Mouse – Swing-out
Keep your mouse handy with this roomy (8"w x 9"d) swivel
shelf. It rotates 360° so the mouse stows away under the
shelf when not in use. Made of steel phenolic. Attaches
with four screws. Shown on pages 86 and 87.
Color: Neutral Black Granite
Part #: 687BK
1. SpacePal Cart –
CPU Siderack with Caster
Mount your CPU on the side with our new SideRack. It
opens to accept your CPU, then closes tight to hug it
securely. Lifts your CPU approximately 7" above the floor.
Adjusts to fit CPUs from 4.5"w to 10"w. Add 2.75" to the
width of your CPU to determine how far the SideRack will
extend from the side of the Cart. Comes with 1 caster.
Specify if you plan to use a 4" or 5" Caster. Holds up to
100 lbs. Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: 564BL, 564GP, 564GB, 564IN,
564RU, 564SA, 564SM, 564TN
2. SpacePal Cart – Document Tray
Raises your documents to the most comfy viewing
position. Pivot the document tray for the best angle.
The lip supports documents 1.75" thick. Mounts to any
leg or can stand alone on the surface. Measures
13"h x 13"w. Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: DTBL, DTGP, DTGB, DTIN, DTRU, DTSA, DTSM, DTTN
Q U I C K
S H I P
B. Super Chair
The Super chair moves forward and backward.
The seat back is taller than the “Basic” chair,
a separate control slides the seat pad front to
back, includes separate angle adjustment and
the T-arms adjust up and down, in and out.
Supports 300 lbs. Shown on pages 25,
27, 29 and 76.
Color: Black (BK)
Part #: 902BK
Compatibility: All Anthro Families
C. Deluxe Chair
All the features of the “Super” chair, plus an
even higher seat back with a padded, height-
adjustable head rest. The padded T-arms
adjust up and down, in and out, and pivot to
allow easy access. Supports 300 lbs. Shown on
pages 28, 70 and 76.
Color: Black (BK)
Part #: 903BK
Compatibility: All Anthro Families
D. Verté
®
Chair
This is state-of-the-art ergonomics in seating.
A series of 11 torsion spring-loaded bearing
joints conform to your exact spine impression,
which you can then lock into place. This chair
is also about comfort. Three built-in levers
control the chair’s overall height and tilt. With
the gel-filled full grain leather seat, padded
two-way adjustable head rest, and adjustable
and removeable padded T-arms, you won’t
want to get up. Supports 275 lbs. Shown on
pages 33 and 77.
Color: Black (BK)
Part #: 904BK
Compatibility: All Anthro Families
A. Basic Chair
The seat angles forward and backward,
and the padded T-arms adjust up and down.
The back features separate height and angle
adjustments. Supports 300 lbs. Shown on
pages 26 and 76.
Color: Black (BK)
Part #: 901BK
Compatibility: All Anthro Families
See next page for more SpacePal Cart accessories.
Q U I C K
S H I P
Q U I C K
S H I P
94
95
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.
6. Trolley – Shelves 2. Trolley – Equipment Hold-down 3. SpacePal Cart – Extension Tubes 1. Power Supply Cart –
Battery Pack
5. Trolley –
Mouse Shelf – Swing-out
Use the Extension Tubes to build your Cart up vertically
to save space. Tubes are 20" long. They push into the legs
of the Cart. Set of 4. Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: 288BL, 288GP, 288GB, 288IN,
288RU, 288SA, 288SM, 288TN
4. SpacePal Cart – Keyboard Caddy
Puts your keyboard where you need it (and goes
underneath when done). Adjusts in height from
even with your work surface to 5.5" below. Platform
measures 25.5"w x 11"d x .5"h. Sticks out 2" when
recessed. Shown on page 81.
Color: Blanc (white) only
Part #: 432BC
5. SpacePal Cart –
Mouse Shelf Clamp-on
Need extra space for your mouse? This affordable metal
shelf clamps onto your work surface and gives you
8" more width to scoot your mouse around. Measures
10"w x 8.5"d. Clamps onto surfaces up to 1.5" thick.
Shown on page 81.
Color: Blueberry (BL), Grape (GP), Graphite Blue (GB),
Indigo (IN), Ruby (RU), Sage (SA), Silver Metallic (SM),
Tangerine (TN)
Part #: CMSBL, CMSGP, CMSGB, CMSIN,
CMSRU, CMSSA, CMSSM, CMSTN
6. SpacePal Cart –
Shelf – Additional
Gives you extra space within the footprint of the Cart.
Mounts to the holes in the legs at any height. Add as
many as space allows. Combine with Extension Tubes to
make your SpacePal taller. Shelf color is Blanc (white).
Shown on page 81.
Color: Shelf Color: Blanc (BC); Metal Color: Blueberry (BL),
Grape (GP), Graphite Blue (GB), Indigo (IN), Ruby (RU),
Sage (SA), Silver Metallic (SM), Tangerine (TN)
Part #: 102BL/BC, 102GP/BC, 102GB/BC, 102IN/BC,
102RU/BC, 102SA/BC, 102SM/BC, 102TN/BC
This 54 Amp/Hour Battery Pack is
the replacement Battery Pack for the
Power Supply Cart when the original battery
runs out. Charges overnight. Life expectancy is
500+ cycles. Ship your old Battery Pack back
to us; we’ll recycle it for you at no charge.
Color: Ash White (AH), Silver Metallic (SM)
Part #: 954AH, 954SM
2. Power Supply Cart –
Equipment Hold-down
Secure your equipment to a shelf with this
handy kit. First, attach an adhesive-backed
buckle to one side of your equipment and
another to the shelf, then feed the included
strap through the buckles to secure. Kit
includes four adhesive-backed buckles, two
8" Polypropylene straps and two alcohol
pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
1. Trolley –
Drawer Solutions
A. Drawer – Small 3"
Sturdy metal drawer takes up little room,
but gives you extra hideaway storage.
Moves in and out on ball bearing glides.
The interior measures 13"w x 11"d x 3"h.
Attaches with eight screws. Shown on
page 83.
Color: Black (BK), Silver Metallic (SM)
Part #: 413BK, 413SM
B. Drawer – 6"
This lockable drawer comes with one divider
to keep a separate space if needed. Rounded
front edges and a curved handle ensure a safe
meeting between your legs and the drawer.
Ball bearings guarantee a smooth push/pull
action. Interior measurements are
12"w x 16.5"d x 6"h. Overall outside
dimensions are 13.5"w x 18.5"d x 6.5"h.
Shown on page 43.
Color: Black (BK), Silver Metallic (SM)
Part #: 275BK, 275SM
Secure your equipment to a shelf with this handy kit.
First, attach an adhesive-backed buckle to one side of
your equipment and another to the shelf, then feed the
included strap through the buckles to secure. Kit includes
four adhesive-backed buckles, two 8" Polypropylene straps
and two alcohol pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
3. Trolley –
Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart with this
metal swivel-head mount. Choose single-monitor or
dual-monitor design. The single-monitor version supports
up to 22 lbs. The dual-monitor version supports a total of
22 lbs. and two monitors up to 17" across. The heavy-duty
dual-monitor version supports up to two monitors
(20" across) and a total of 44 lbs. It is 22" wide with
mounting points in 1" increments. The Mount elevates
the center of the monitor 13" above the shelf. Install by
drilling through the shelf and secure with four bolts.
Conforms to VESA 75mm and 100mm mounting
standards. Shown on page 83.
Color: Black (BK), Silver Metallic (SM)
Part #: Single – 615BK, 615SM
Dual – 617BK, 617SM
Heavy-Duty Dual – 627BK, 627SM
4. Trolley –
Keyboard and Mouse Caddy – B
The height-adjustable, retractable caddy tilts 20° negative
or 20° positive, perfect for shared workstations and for
individual users who want to change typing position
throughout the day. The keyboard surface is 19.5" wide,
8" deep and comes with a padded wrist support for
comfort. Keyboard platform adjusts from even with your
work surface to 6" below. Available with mouse on left
or right. Steel phenolic surface is neutral granite finish.
Shown on page 83.
Color: Neutral Black Granite
Part #: (mouse on right) UKMCBK, (mouse on left) UKMCLBK
Keep your mouse handy with this roomy (8"w x 9"d)
swivel shelf. It rotates 360° so the mouse stows away
under the shelf when not in use. Made of steel phenolic.
Attaches with four screws. Shown on page 86.
Color: Neutral Black Granite
Part #: 687BK
A. Shelf – Additional Metal
Install larger equipment (like CPUs or printers) on this
solid metal shelf. Installs on the legs at any height in
1" increments and is 17.5"w x 18"d. Holds up to 50 lbs.
Shown on page 83.
Color: Silver Metallic (SM)
Part #: 654SM
C. Shelf – Base
Slotted metal shelf installs between the base legs to
store your CPU, UPS or other hardware. Shelf comes
with Strap and Buckle Kit. Usable shelf space is
11.5"w x 15"d. Shelf holds up to 60 lbs.
Shown on page 83.
Color: Silver Metallic (SM)
Part #: 648SM
B. Shelf – Additional Wood
Add more storage space with another shelf. This
laminated wood shelf is 18.5"w x 19.5"d and comes
with a cord loop for cable management. Shelf holds
50 lbs. Shown on page 83.
Color: Metal: Silver Metallic (SM);
Laminate: Light Grey (LG)
Part #: 427SM/LG
7. Trolley – Tray
This sturdy metal bin stores odds and ends and keeps
them handy. The 2.5" high sides keep contents from
rolling out. Install it at any height along the legs in
1" increments. Measures 11.5"w x 14.5"d x 2.5"h
and holds up to 40 lbs. Shown on page 83.
Color: Silver Metallic (SM)
Part #: 631SM
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
See previous page for more SpacePal Cart accessories.
Q U I C K
S H I P
Talking to customers is always a pleasure.
I got a call from an elderly gentleman whose son had sent him a
little plastic thing from Anthro. He was very angry because he didn’t
know what it was or how to use it.
After a very lengthy conversation trying to figure out what exactly
he had, I realized it was a Tidy Tube, a toothpaste tube roller upper
we give out at trade shows. When I told him what it was, the man
indignantly replied, “Why would I need that? I don’t have any teeth!”
– Mike, Inside Sales
We hear some great stories about why customers love their Anthro workstations.
One customer became a loyal Anthro evangelist in 1994 after the Northridge/Riverside earthquake. She said that her
computer station was the only thing that survived.
She credits her mobile AnthroCart for “rolling with the punches” during the quake and aftershocks. In fact her
AnthroCart was the only thing left standing! It was on the other side of the room, but it was still standing!
– Sandy, Inside Sales
96
97
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.
Safely store your beverage and prevent spills on your
desk. It holds your largest cup of coffee! Clamps onto
any surface with an easy-to-use C-clamp. Holds up
to a 3.5" diameter cup and is 2" deep.
Shown on pages 51 and 52.
Color: Silver Metallic (SM)
Part #: 465SM
1. Convoi – Cup Holder
Raises your documents and manuals to a preferred viewing
height. Comes with 10" gooseneck so you can find a position
that works for you. Lip is 2" deep to securely hold your
items. Clamps onto the edge of your Cart with a C-clamp.
Measures 14.25"w x 11"h. Shown on pages 51 and 52.
Color: Silver Metallic (SM)
Part #: 440SM
2. Convoi – Document Stand
3. Convoi – Drawer Solutions
E. Drawer – 6"
This lockable drawer comes with one divider
to keep a separate space if needed. Radiused
front edges and a rounded handle ensure
a safe meeting between your legs and the
drawer. Ball bearings guarantee a smooth
push/pull action. Interior measurements are
12"w x 16.5"d x 6"h. Overall outside
dimensions are 13.5"w x 18.5"d x 6.5"h.
Shown on page 43.
Color: Silver Metallic (SM)
Part #: 275SM
Compatibility: Requires a Cap Shelf
or Wood Shelf.
F. Drawer – 6" and 11" File
Take advantage of Convoi’s open design
and add a Hanging File under your Cart.
Lockable metal unit has 2 drawers. One
is 6" high and one 11" high for all your
letter-size files. Interior dimensions for
the 6" Drawer are 12"w x 16.5"d x 6"h.
Interior measurements for the 11" Drawer
are 12"w x 16.5"d x 9.5"h. Overall outside
dimensions are 13.5"w x 18.5"d x 17.5"h.
Shown on page 24.
Color: Silver Metallic (SM)
Part #: 298SM
Compatibility: Requires a Cap Shelf
or Wood Shelf.
D. Drawer – Small 3"
Sturdy metal drawer takes up little room, but
gives you extra hideaway storage. Moves in
and out on ball bearing glides. The interior
measures 13"w x 11"d x 3"h. Attaches with
eight screws. Shown on page 56.
Color: Silver Metallic (SM)
Part #: 413SM
Compatibility: Requires a Cap Shelf
or Wood Shelf.
A. 1-Drawer Small Enclosure
This locking metal and wood drawer glides easily on high
quality ball bearings. Available for 24" and 30" wide Carts.
Interior depth is 21.75" and interior height is 7.5" on both
sizes. Exterior height is 12.5". Interior drawer width on the
24"w Cart is 17.75" and on the 30"w Cart, it is 23.75". Mount
drawer onto legs exactly where you want it. Shown on page 85.
Color: Silver Metallic (SM)
Part #: 24"w – 2401SM/BF; 30"w – 3001SM/BF
C. 4-Drawer Large Enclosure
Available for 24" and 30" wide Carts. Includes two large
7.5" high drawers on the bottom and two smaller 3.5" high
drawers on top, giving plenty of storage space. Overall
height is 27.5". Metal and wood drawers come with locks
and an anti-tip feature. Interior depth is 21.75" for both
Cart sizes. Interior height is 7.5" on the two bottom drawers
and 3.5" on the two upper drawers. Interior drawer width on
the 24"w Cart is 17.75" and on the 30"w Cart it is 23.75".
Ball bearings guarantee a smooth push/pull action. Mount
the drawer onto the legs at the height that works best for you.
Shown on page 85.
Color: Silver Metallic (SM)
Part #: 24"w – 2422SM/BF; 30"w – 3022SM/BF
B. 3-Drawer Medium Enclosure
The large 7.5" high bottom metal and wood drawer is
topped by two smaller 3.5" high drawers, giving plenty of
storage space. All drawers lock and move in and out on
ball bearing glides. Available for 24" and 30" wide Carts.
Height is 20". Interior depth is 21.75" for both Cart sizes.
Interior drawer width on the 24"w Cart is 17.75" and
on the 30"w Cart is 23.75". All drawers have an anti-tip
feature. May be mounted onto legs at any desired height.
Shown on page 85.
Color: Silver Metallic (SM)
Part #: 24"w – 2421SM/BF; 30"w – 3021SM/BF
This rounded metal cap finishes off the legs.
Measures 2.5"w by 5"d and weighs two lbs.
Sold as a pair. One pair per Cart. Shown on
page 84.
Color: Silver Metallic (SM)
Part #: BUEC
Compatibility: Required for orders without
a Cap Shelf.
4. Convoi – End Cap
5. Convoi – Equipment Hold-down
Secure your equipment to a shelf with this handy kit.
First, attach an adhesive-backed buckle to one side of
your equipment and another to the shelf, then feed the
included strap through the buckles to secure. Kit includes
four adhesive-backed buckles, two 8" Polypropylene straps
and two alcohol pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
6. Convoi –
Flat Panel Monitor Solutions
A. Flat Panel Monitor Arm
Mount your flat panel displays and raise them off the work
surface. Move it near you when you need it, away when you
don’t, with light fingertip pressure. Made of steel, the Arm
has a vertical travel range of 16" in height and rotates 360°.
Adjusts at three joints and tilts your display up to 200°.
Can be mounted two ways: drill through option or C-clamp
to any shelf edge. Extends 22" from where it is mounted.
Includes integrated cable management. Conforms to VESA
75mm and 100mm mounting standards. Shown on page 26.
Flat Panel Monitor Arm: Holds monitors 10 to 22 lbs.
Flat Panel Monitor Arm – Super: Holds monitors
18 to 42 lbs.
Color: Silver Metallic (SM)
Part #: Standard – LCDSM; Super – LCD2SM
Compatibility: Requires a Cap Shelf or Wood Shelf.
B. Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart with this metal
swivel-head mount. Choose single-monitor or dual-monitor
design. The single-monitor version supports up to 22 lbs.
The dual-monitor version supports a total of 22 lbs. and
two monitors up to 17" across. The heavy-duty dual-monitor
version supports up to two monitors (20" across) and a
total of 44 lbs. It is 22" wide with mounting points in
1" increments. The Mount elevates the center of the monitor
13" above the shelf. Install by drilling through the shelf and
secure with four bolts. Conforms to VESA 75mm and 100mm
mounting standards. Shown on page 85.
Color: Silver Metallic (SM)
Part #: Single – 615SM; Dual – 617SM;
Heavy Duty Dual – 627SM
Compatibility: Requires a Cap Shelf or Wood Shelf.
This 18" wide handle makes it easy to steer your Convoi.
Extends 5" from the side of the Cart, and is 1.25" in
diameter. Mounts to either leg. Shown on page 84.
Color: Silver Metallic (SM)
Part #: BUHD
7. Convoi – Handle
8. Convoi – Keyboard Solutions
B. Keyboard Drawer 20"
Place your keyboard on this handy drawer. Pull your keyboard
out when you want to use it, hide it away when you’re done.
Slides on smooth ball bearing glides. Can be assembled to
fit 3" to 4" below your large shelf surface so there is plenty
of room for your knees. The 20" wide Drawer measures
20"w x 11"d x 3.5"h. Extends 10" out from the surface
you are mounting it to. Shown on pages 58 and 59.
Color: Blanc (BC)
Part #: 20BC
Compatibility: Requires a Cap Shelf or Wood Shelf.
Does not work on the 20"w Convoi.
A. Keyboard and Mouse Caddies
Ensure ergonomic keyboarding height and comfort with these
versatile and well-made Caddies. Roomy keyboard platform
(19.5"w x 8"d), plus an extension for your mouse (8"w x 9"d)
that swivels. Caddies move in and out, up and down, tilt and
swivel 360°. Made of steel and phenolic. The front surface
has a foam rest for wrist support. Shown on page 84.
Keyboard and Mouse Caddy – A: Tilts 20° negative to
10° positive. Movement ranges from 6" above your work
surface to 5.5" below – great for sit-down or stand-up
applications. Mounting track is 22" deep.
Keyboard and Mouse Caddy – B: Tilts 20° negative to
20° positive. Movement ranges from even with your work
surface to 6" below. Mounting track is 18.5" deep.
Color: Neutral Black Granite
Part #: Keyboard and Mouse Caddy – A:
(mouse on right) 149SM, (mouse on left) 149LSM;
Keyboard and Mouse Caddy – B:
(mouse on right) UKMCBK, (mouse on left) UKMCLBK
Compatibility: Requires a Cap Shelf or Wood Shelf.
9. Convoi – Paper Tray
Use several Paper Trays to organize your loose papers. Holds
a full ream of paper – perfect for right under a shelf with a
printer. Tray mounts under any surface. Made of 16 gauge
steel, the tray measures 11.25"w x 12.5"d x 3"h.
Shown on pages 34 and 52.
Color: Silver Metallic (SM)
Part #: 325SM
Compatibility: Requires a Cap Shelf or Wood Shelf.
10. Convoi – Rack – Hanging
Keep your rack equipment within easy reach. Tapped
mounting rails make it a breeze to mount your equipment.
Available in 3 and 9 Unit sizes, the Hanging Rack screws
to the underside or top of your shelf. The 3 Unit Rack
measures 5.25"h x 22"w and the 9 Unit Rack measures
18.25"h x 22"w. Holds up to 100 lbs. Made of 11 gauge
steel. Shown on page 55. See page 43 to
see a 9 Unit photo.
Color: Silver Metallic (SM)
Part #: 3 Unit – RH3SM, 9 Unit – RH9SM
Compatibility: Requires a Cap Shelf or Wood Shelf.
Does not work on the 20"w Convoi.
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
A
B
Q U I C K
S H I P
Q U I C K
S H I P
See next page for more Convoi accessories.
3. Convoi – Drawer
Solutions (continued)
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
98
99
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.
4. POC Cart –
Mouse Shelf – Swing-out
Keep your mouse handy with this roomy (8"w x 9"d) swivel
shelf. It rotates 360° so the mouse stows away under the
shelf when not in use. Made of steel phenolic. Attaches
with four screws. Shown on pages 86 and 87.
Color: Neutral Black Granite
Part #: 687BK
5. POC Cart – Shelves
A. Shelf – Equipment Large
Use this metal shelf for your larger equipment (CPUs,
UPSs or printers). Attaches along the trunk of the Cart
in 2" increments with 4 easy-to-adjust knobs. Includes
adjustable strap. Holds towers up to 8" wide. Measures
24"w x 8.25"d. Shown on pages 86 and 87.
Color: Silver Metallic (SM)
Part #: 623SM
B. Shelf – Equipment Small
Metal shelf attaches anywhere along the trunk of the
POC Cart in 2" increments with 4 easy-to-adjust knobs.
Includes adjustable strap to keep your equipment secure.
Measures 12"w x 7.25"d. Holds up to 50 lbs.
Shown on pages 86 and 87.
Color: Silver Metallic (SM)
Part #: 621SM
1. Security Cart – Drawer
Roomy 4"h x 17"d metal drawer. Installs at any height
inside the enclosure and pulls all the way out on
22" full-extension glides. 24" wide Drawer measures
18.25" wide on the interior. 30" wide Drawer measures
24.25" wide on the interior. Shown on pages 90 and 91.
Color: Black (BK), Silver Metallic (SM)
Part #: 24" wide– EDW24BK, EDW24SM;
30" wide–EDW30BK, EDW30SM.
3. Security Cart –
Equipment Hold-down
Secure your equipment to a shelf with this handy kit.
First, attach an adhesive-backed buckle to one side of
your equipment and another to the shelf, then feed the
included strap through the buckles to secure. Kit includes
four adhesive-backed buckles, two 8" Polypropylene
straps and two alcohol pads for cleaning equipment
and shelves. Shown on page 56.
Color: Black (BK)
Part #: 333BK
4. Security Cart – Extension Tubes
Install Additional Upper Shelves above the cabinet on
these Extension Tubes. Tubes have holes in 1" increments,
so you can put the shelves wherever you want. Choose
from six lengths: 5", 7", 12", 20", 24" and 36".
Shown on page 90.
Color: Black (BK), Silver Metallic (SM)
Part #: See pricelist for a list of part numbers
5. Security Cart –
Flat Panel Monitor Solutions
A. Flat Panel Monitor Arm
Mount your flat panel displays and raise them off the work
surface. Move it near you when you need it, away when you
don’t, with light fingertip pressure. Made of steel, the Arm
has a vertical travel range of 16" in height and rotates 360°.
Adjusts at three joints, and tilts your display up to 200°. Can
be mounted two ways: drill through option or C-clamp to any
shelf edge. Extends 22" from where it is mounted. Includes
integrated cable management. Conforms to VESA 75mm and
100mm mounting standards. Shown on pages 26 and 91.
Flat Panel Monitor Arm: Holds monitors 10 to 22 lbs.
Flat Panel Monitor Arm – Super: Holds monitors
18 to 42 lbs.
Color: Black (BK), Silver Metallic (SM)
Part #: Standard – LCDBK, LCDSM; Super – LCD2BK, LCD2SM
11. Convoi – Shelves
B. Shelf – Cap
This sturdy shelf is one inch industrial grade particle board,
covered with high pressure, scratch-resistant laminate
with contrasting edge banding. It is for the top of the Cart
only, and is available for both the 24" and 30" wide Carts.
Shelves for both Cart sizes are 22.5" deep. The shelf for
the 24"w Cart is 24.25"w, the shelf for the 30"w Cart is
30.25"w. Shown on pages 84 and 85.
Color: Blanc with Fog edge band (BF)
Part #: 24"w – 24CSSM/BF; 30"w – 30CSSM/BF
E. Shelf – Wood
This strong 1" thick shelf is available for both 24" and
30" wide Carts. Shelves for both Cart sizes are 22.5"
deep. The shelf for the 24"w Cart is 23.5"w, the shelf for
the 30"w Cart is 29.5"w. Set shelves at any height along
the legs, starting at 10" above the floor. Shelf slides
down the legs and screws into place with 8 screws.
Shown on page 84.
Color: Blanc with Fog edge band (BF)
Part #: 24"w – 24WSSM/BF; 30"w – 30WSSM/BF
C. Shelf – Metal
This solid metal shelf comes in 24" and 30" widths.
Shelves for both Cart sizes are 22" deep. The shelf for
the 24"w Cart is 22"w, the shelf for the 30"w Cart is
28"w. Shelf slides down the legs and screws into place
with 8 screws. Shown on page 84.
Color: Silver Metallic (SM)
Part #: 24"w – 24MSSM; 30"w – 30MSSM
F. Shelf – Tilt
This versatile solid metal shelf tilts 14
º
to either side.
Available for both 24" and 30" wide Carts. The shelf for
the 24"w Cart is 17"w x 24.5"d, and for the 30"w Cart,
it is 23"w x 23"d. Shelf slides down the legs and screws
into place with 8 screws. Shown on page 84.
Color: Silver Metallic (SM)
Part #: 24"w – 24MTSM; 30"w – 30MTSM
A. Shelf – Base Storage
Available in both 24" and 30" widths. Shelves for both
Cart sizes are 16" deep. The shelf for the 24"w Cart is
17.25"w and the shelf for the 30"w Cart is 23.75"w.
Below the shelf is a 9"w x 16"d x 7.75"h storage box
often used for a UPS. Shown on page 84.
Color: Silver Metallic (SM)
Part #: 24"w – 24IBSM; 30"w – 30IBSM
D. Shelf – Metal Bin
The 2" high sides on this shelf help keep items securely
on the Cart. Available for both 24" and 30" wide Carts.
Shelves for both Cart sizes are 22" deep. The shelf width
for the 24"w Cart is 21.5", and for the 30"w Cart it is
27.5". Shelf slides down the legs and screws into place
with 8 screws. Shown on page 85.
Color: Silver Metallic (SM)
Part #: 24"w – 24MBSM; 30"w – 30MBSM
12. Convoi –
Surge Protector
Take all of your cords and plug them into
one strip. Mount onto any leg or underneath
any shelf. The Surge Protector has 6 outlets
rated at 15 amp and 120 volts. UL listed.
Has a 6 foot cord. Comes with One Year
Limited Warranty.
Color: Black (BK)
Part #: 520BK
1. POC Cart – Bin
Sturdy metal basket. Attaches anywhere along
the trunk of the POC Cart in 2" increments
with four easy-to-adjust knobs. Measures
8"d x 12.25"w x 3.75"h. Holds up to 40 lbs.
Shown on pages 86 and 87.
Color: Silver Metallic (SM)
Part #: 635SM
2. POC Cart –
Equipment Hold-down
Secure your equipment to a shelf with this
handy kit. First, attach an adhesive-backed
buckle to one side of your equipment and
another to the shelf, then feed the included
strap through the buckles to secure. Kit
includes four adhesive-backed buckles,
two 8" Polypropylene straps and two alcohol
pads for cleaning equipment and shelves.
Shown on page 56.
Color: Black (BK)
Part #: 333BK
3. POC Cart –
Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart
with this metal swivel-head mount. Choose
single-monitor or dual-monitor design. The
single-monitor version supports up to 22 lbs.
The dual-monitor version supports a total of
22 lbs. and two monitors up to 17" across. The
heavy-duty dual-monitor version supports up
to two monitors (20" across) and a total of
44 lbs. It is 22" wide with mounting points in
1" increments. The Mount elevates the center
of the monitor 13" above the shelf. Install by
drilling through the shelf and secure with four
bolts. Conforms to VESA 75mm and 100mm
mounting standards. Shown on pages 86
and 87.
Color: Black (BK), Silver Metallic (SM)
Part #: Single – 615BK, 615SM; Dual – 617BK,
617SM; Heavy-Duty Dual – 627BK, 627SM
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
See previous page for more Convoi accessories.
See next page for more Security Cart accessories.
B. Flat Panel Monitor Mount
Secure your flat panel monitor to your Cart with this
metal swivel-head mount. Choose single-monitor or
dual-monitor design. The single-monitor version supports
up to 22 lbs. The dual-monitor version supports a total of
22 lbs. and two monitors up to 17" across. The heavy-duty
dual-monitor version supports up to two monitors
(20" across) and a total of 44 lbs. It is 22" wide with
mounting points in 1" increments. The Mount elevates
the center of the monitor 13" above the shelf. Install by
drilling through the shelf and secure with four bolts.
Conforms to VESA 75mm and 100mm mounting
standards. Shown on page 86.
Color: Black (BK), Silver Metallic (SM)
Part #: Single – 615BK, 615SM; Dual – 617BK, 617SM:
Heavy-Duty Dual – 627BK, 627SM
Q U I C K
S H I P
Q U I C K
S H I P
Q U I C K
S H I P
2. Security Cart – Equipment Strap
Provides that extra level of insurance and safety for your
hardware. The 1.5" wide heavy-duty belt cinches and
buckles around your hardware. Clamps onto any shelf.
Measures 8’ long. Strap is Black, clamps are Black and
Silver Metallic. Shown on page 59.
Color: Black (BK), Silver Metallic (SM)
Part #: 385BK, 385SM
100
101
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.
6. Security Cart – Handle – 16"
Move the Cart just where you need it with this 16" wide
Handle. The Handle extends 5" from the side of the Cart
when installed and is angled for easy maneuverability.
Attaches to vertical leg with four screws. Shown on
pages 90 and 91.
Color: Black (BK), Silver Metallic (SM)
Part #: EHBK, EHSM
7. Security Cart –
Keyboard Solutions
B. Keyboard Drawer 20"
Pull your keyboard out when you want to use it, hide it
away when you’re done. Slides on smooth ball bearing
glides. Can be assembled to fit 3" to 4" below your large
shelf surface so there is plenty of room for your knees. The
20" wide Drawer measures 20"w x 11"d x 3.5"h. Extends
10" out from the surface you are mounting it to. Shown
on pages 58 and 59.
Color: Black (BK), Light Grey (LG)
Part #: 20BK, 20LG
Compatibility: Does not work with the 24"w Security Cart.
A. Keyboard and Mouse Caddies – B
The height-adjustable, retractable caddy tilts 20° negative
or 20° positive, perfect for shared workstations and for
individual users who want to change typing position
throughout the day. The keyboard surface is 19.5" wide,
8" deep and comes with a padded wrist support for
comfort. Keyboard surface adjusts from even with your
work surface to 6" below. Available with mouse on left
or right. Steel phenolic surface is neutral granite finish.
Shown on page 90.
Color: Neutral Black Granite
Part #: (mouse on right) UKMCBK, (mouse on left) UKMCLBK
8. Security Cart – Shelves
A. Shelf – Inside Metal
Expand the storage capacity by adding these Metal Shelves.
The steel Shelves are 16.75" deep. The Shelf for the 24" wide
Cart measures 19.25" wide. The Shelf for the 30" wide Cart
measures 25.75" wide. Shown on pages 90 and 91.
Color: Black (BK), Silver Metallic (SM)
Part #: 24" wide – EMS24BK, EMS24SM
30" wide – EMS30BK, EMS30SM
B. Shelf – Upper
Create storage space above the cabinet by adding these
laminated wood Shelves to Extension Tubes. Shelves are
21.25" deep. The Shelf for the 24" wide Cart measures
23.5" wide. The Shelf for the 30" wide Cart measures
29.5" wide. Shown on page 90.
Color: Black (BK), Light Grey (LG)
Part #: 24" wide – EAS24BK/BK, EAS24SM/LG
30" wide – EAS30BK/BK, EAS30SM/LG
1. Rack – Casters – 5"
Four 5" plate mount casters are easy to install
and move smoothly over bumpy surfaces. Two
locking and two directional. Add the Rack
Handle for easy steering. Shown on page 92.
Part #: 871RT
2. Rack – Door
Strong steel door has perforations to allow
plenty of ventilation. Several mounting options
(front or back, opening left or right) mean
you can install it to meet your needs. Ships
assembled, just add three supplied brackets
and lift door into place! Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 12 Unit – 847BK, 847SM
16 Unit – 846BK, 846SM
24 Unit – 848BK, 848SM
36 Unit – 849BK, 849SM
3. Rack – Drawer
This large metal drawer pulls all the way out
on 22" full-extension glides. Drawer holds
up to 75 lbs. Interior dimensions are
7"h x 19"w x 22"d. Two pairs of Tapped Rails
(sold separately, see #8) are required for
installation of this Drawer.
Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 850BK, 850SM
6. Rack – Handle
Add this angled Handle for easy steering! The steel
Handle mounts to the front or back of the Rack
System at a comfortable height. Does not coexist
with the Door. Shown on page 93.
Color: Black (BK), Silver Metallic (SM)
Part #: 852BK, 852SM
7. Rack – Panel Solutions
A. Back Panel
Perforated steel panel allows plenty of ventilation. Secure
tooled entry, attaches with six screws. Large cord grommets
route cables conveniently into or out of the Rack Unit.
Shown on page 93.
Color: Black (BK), Silver Metallic (SM)
Part #: 12 Unit – 840BK, 840SM; 16 Unit – 843BK, 843SM;
24 Unit – 841BK, 841SM; 36 Unit – 842BK, 842SM
B. Bottom Panel
Use this slotted steel bottom as a base shelf for storage or
to protect equipment from damage. Rests on the bottom of
the Rack frame. Supports up to 75 lbs. evenly distributed.
Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 24" deep – 868BK, 868SM; 30" deep – 869BK, 869SM
C. Side Panels
The ventilated steel panels allow plenty of air flow to keep
your equipment cool, tooled entry with seven screws protect
the contents. Hand grips on the 24 Unit and 36 Unit ease
installation. Available in four heights and two depths.
Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: See the pricelist for a list of part numbers.
4. Rack – Equipment Hold-down
Secure your equipment to a shelf with this
handy kit. First, attach an adhesive-backed
buckle to one side of your equipment and
another to the shelf, then feed the included
strap through the buckles to secure. Kit
includes four adhesive-backed buckles,
two 8" Polypropylene straps and two
alcohol pads for cleaning equipment
and shelves. Shown on page 56.
Color: Black (BK)
Part #: 333BK
7. Rack – Panel Solutions (continued)
D. Top Panel
Add this solid steel Top for added security and storage
space. Attaches by 8 screws. Supports up to 75 lbs.
evenly distributed. Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 24" deep – 865BK, 865SM; 30" deep – 866BK, 866SM
Attach these rails to the front post to support the front of
your equipment; attach to Floating Panels to support the
back of your equipment. Available in 10-32 thread or
Dell/HP standard (available in 4 Unit length – Part # 4UDC).
Two pairs of Tapped Rails are required for installation of
most accessories.
Color: Zinc Plated
Part #: The threaded options: 4 Unit – 4UEIA,
12 Unit – 12UEIA, 16 Unit – 16UEIA, 24 Unit – 24UEIA,
36 Unit – 36UEIA; The Dell/HP option - 4UDC
8. Rack – Rails – Tapped
9. Rack – Shelves
A. Shelf – Fixed
Store non-rack-mountable equipment inside your
Rack System. Steel Shelf mounts to Tapped Rails
(sold separately) with 4 screws. Shelves support up to
75 lbs. Two pairs of Tapped Rails (sold separately, see #8)
are required to install this Shelf. Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 851BK, 851SM
B. Shelf – Pull-out
This steel Shelf pulls out 22" on full-extension glides
and supports up to 75 lbs. The perfect place for your
keyboard and mouse. Two pairs of Tapped Rails
(sold separately, see #8) are required to install
this Shelf. Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: 853BK, 853SM
Q U I C K
S H I P
Q U I C K
S H I P
See previous page for more Security Cart accessories.
5. Rack – Face Plates
Steel plates cover open areas and install
with just four screws. Shown on page 92.
Color: Black (BK), Silver Metallic (SM)
Part #: Small (1 Unit) FPSBK, FPSSM
Medium (2 Unit) FPMBK, FPMSM
Large (3 Unit) PLBK, FPLSM
It's fun to creatively tackle the challenges.
I remember when Jared in our Customer Service department took a call from a cranky elderly woman who lived
in a remote part of California. She had just opened her new AnthroCart, and was unable to put it together. She
demanded that she be able to return it.
We knew she really wanted it, so Jared asked if she had any relatives we could call who could help walk her
through the assembly. The answer was no. Jared then called the local fire department in the hope they might
go out to help her. On hearing who the gal was, they immediately said no (small community, big reputation).
Finally, Jared contacted the local Boy Scout Troop to see if they wanted to give it a shot. They agreed,
and the story ended happily for all.
– Cathy, Co-founder
102
103
Accessories
Unique Solutions
Drill Symbol indicates that you will need
to drill a hole in a shelf for installation.
/
