2. Pyle
  3. AZPDRIS06

Pyle AZPDRIS06, PDRIS06, PDRIS06.5 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Pyle AZPDRIS06 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
• Opentheboxandyouwillndthedeskisalreadyfullyassembled.Youonlyneedtoplaceitonatable.
• Thetableyouplaceitonshouldbewiderthan29",anddeeper
than26.5",asthebasewilloccupyanareaofapproximately29”
by215/8"initslowestposition.
• Thereisa"T"stylelockinghandleontheleftandrightunderthe
maindesktop,putyourhandsonleftandrightthenuseyournger
topulloutthelockingpinsotheanglebecomesadjustable.
• Adjusttheangletotheheightyouneedandreleasethelocking
pinstomakesurebothpinsarelocked.
• When you wantto increase the height,you to need pull the
desktopupalittle,andwhenyouwanttodescreasetheheight,
youneedtopressthedesktopdownalittle.
Normallytheuserwillonlyusethelowestandhighestpositions.
Pay attention: You must lock BOTH pins for safety.
SITTING & STANDING WORKING HEIGHT ADJUSTABLE WORKSTATION
QUICKUSERGUIDE
MODEL:PDRIS06
Thanks for choosing this sit-stand height adjustable desk/workstation
Although designed to be easy-to-use, carefully reading and following this guide will
help you to use this desk more easily.
LOCKINGHANDLE
TABLESURFACE
/