Arlington TVB613 Owner's manual

Brand
Arlington
Model
TVB613
Category
Wall & ceiling mounts accessories
Type
Owner's manual

Arlington TVB613 is a recessed double-gang electrical box for close-to-the-wall mounting of LCD and plasma TVs. It allows you to install two duplex (power) receptacles or one low voltage device and one power duplex receptacle. There are also two additional built-in mounts for low voltage, data/media connections like speakers, satellite TV, surround-sound, etc. The 13" wide, non-metallic TV BOX mounts securely between 16" on center studs. The box is recessed, so plugs don’t extend past the wall. You can mount TVs flush or push furniture closer to the wall.

Arlington TVB613 is a recessed double-gang electrical box for close-to-the-wall mounting of LCD and plasma TVs. It allows you to install two duplex (power) receptacles or one low voltage device and one power duplex receptacle. There are also two additional built-in mounts for low voltage, data/media connections like speakers, satellite TV, surround-sound, etc. The 13" wide, non-metallic TV BOX mounts securely between 16" on center studs. The box is recessed, so plugs don’t extend past the wall. You can mount TVs flush or push furniture closer to the wall.

Catalog UPC/DEI/NAED Description Unit/Std
Number Mfg. #018997 TV Box™ Pkg
13" wide recessed
TVB613
09360 double-gang device box 1
w/ two built-in mounts for
low voltage installations
for Close-to-the-wall Mounting of LCD and Plasma TVs
Arlington’s recessed TV BOX™ for
new or old work allows LCD and
plasma TVs to be placed flush
against the wall.
Its double-gang, combo box design
allows you to install two duplex
(power) receptacles – or you can
use the box separator to install one
low voltage device and one power
duplex receptacle. There are also
two additional built-in mounts for
low voltage, data/media connec-
tions like speakers, satellite TV,
surround-sound, etc.
The 13" wide, non-metallic TV BOX
mounts securely between 16" on
center studs.
The box is recessed, so plugs don’t
extend past the wall. You can mount
TVs flush or push furniture closer to
the wall.
• Textured, paintable trim plate
covers edges of cut drywall
Positioning tabs for 1/2" wall
thickness assure accurate
placement of box on stud
• Horizontal or vertical mounting
• UL Listed – CSA Listed with
grounding lug
N
N
E
E
W
W
more on
reverse
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
www.aifittings.com
Arlington
Patented/Other patents pending
TVB613
with T
rim Plate
TV Box
™
Recessed Double-Gang Electrical Box
CSA w/
gr
ounding
lug only
TV613 includes recessed TV Box w/ trim plate,
low voltage separator, NM cable connector and
installation scr
ews.
Mounting
Bracket
LCD TV
Recessed
TV BOX™
Distributed by
Patented/Other patents pending. TVB613 0707/50M
© 2007 Arlington Industries, Inc.
Plugs stay in the box - TV mounts flush against the wall
1 Stauffer Industrial Park
Scranton, P
A
18517
800/233.4717
Fax 570/562.0646
www
.aifittings.com
Arlington
TV Box
™
Recessed Power & Low Voltage Electrical Box
TVB613
Trim
plate
Separator
Two Built-in
Low Voltage
Mounts
Double-gang Box
New Construction
Mount box section to stud through the slotted
holes in box. Use minimum of (2) #6 x 1-5/8"
wood screws. Positioning tabs place box properly
for 1/2 " finish wall thickness.
Install NM cable connector.
Pull power and low voltage cables.
Install low voltage separator if using
low voltage in double-gang box.
Install power and low voltage
wiring devices.
After drywall (or other)
is installed, attach trim
plate to box using (4)
#8 x 3/4" screws*.
Secur
e trim plate to wall
with (4) #8 x 1-1/2"
screws*. *
Screws supplied.
See 1 and 4 at right.
Separator
1
2
3
4
1 Attach trim plate to box section with (4)
#8 x 3/4" (supplied) screws through these holes.
2 Cut 6" x 13-1/4" hole next to stud.
Install NM cable connector, and
power and low voltage cables.
3 Mount box (horizontal) between 16" o.c. studs
through remaining (4) holes in trim plate.
Use (4) #8 x 1-1/2" (supplied) screws.
4 Install low voltage separator if using low voltage
in double-gang box.
5 Install power and low voltage wiring devices.
6 Complete wiring connections to all power
and low voltage devices.
Finished installation with wires plugged
in to recessed TV Box
Note:
For V
er
tical mounting to stud use minimum
(2) #6 x 1-5/8 (not included) thr
ough slotted holes.
Old Work
  • Page 1 1
  • Page 2 2

Arlington TVB613 Owner's manual

Brand
Arlington
Model
TVB613
Category
Wall & ceiling mounts accessories
Type
Owner's manual

Arlington TVB613 is a recessed double-gang electrical box for close-to-the-wall mounting of LCD and plasma TVs. It allows you to install two duplex (power) receptacles or one low voltage device and one power duplex receptacle. There are also two additional built-in mounts for low voltage, data/media connections like speakers, satellite TV, surround-sound, etc. The 13" wide, non-metallic TV BOX mounts securely between 16" on center studs. The box is recessed, so plugs don’t extend past the wall. You can mount TVs flush or push furniture closer to the wall.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents